During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

In schools, misconceptions about genetics can arise due to several factors, and the consequences of these misunderstandings can be significant. Lack of education can play a central role in the spread of misinformation about genetics. When teachers lack sufficient knowledge or do not have access to up-to-date resources, they risk inadvertently conveying inaccuracies to students. Additionally, students own preconceived notions and misinterpretations can be reinforced through interaction with their peers, creating a vicious cycle of misinformation. In this study, various misconceptions within genetics education have been identified and analyzed, while different strategies to prevent these misconceptions have been examined. The study revealed that the two most common misconceptions are the confusion between "genes" and "DNA" and the simplified perception of genetic determinism.

Syftet med denna studie är att studera på vilket sätt modellen Learning Study kan användas i gymnasiesärskolan. Med utgångspunkt i variationsteorin ämnar vi studera hur vi med lärandeobjektet måttsatsen kan utveckla kunskaper hos elever med funktionsnedsättningen generell utvecklingsstörning att använda den i praktiken. För vår datainsamling väljer vi metoden Learning Study. Orsaken till val av denna metod är att den öppnar upp ett mönster för variation som hjälper eleverna att lära sig måttsatsen. Den underlättar för eleverna att förstå de generella principerna kring användandet av den, det vill säga att måtten har olika storlek.

Work and health are strongly connected because people spend the most part of their adult life in a workplace. The work environment influences the fellow co-workers experience of health and learning in different ways. Accordingly the organizations influence has by doing so, created a great significance to fellow co-workers experiences. Organizational changes often create turbulence within an organization and are often experienced negatively by the fellow-co-workers even if it will give positive effects later. The aim of this study was to illuminate nurses- and assistant nurses experiences of health and learning related to organizational changes.

This degree project contains a summary of all existing patents dealing with roller hemmingdevices to provide the client with a basis to develop its own roller hemming devicewithout infringing on existing patent. It also aims to describe all the patents on operationand function and provide a review of patents and give a proposal to a new roller hemmingdevice. The project is carried out in cooperation with Epsilon Industrikonstruktioner AB..

In my essay I'm studying what aspects of the school environment that influences the pupils experience of safety and what aspects that strengthens the experience of safety. I'm introducing three different dilemmas from three different places in the school environment. The three dilemmas have that in common that they focus on safety. I'm introducing the after-school centre commission according to the National Agency for Education, presenting results and theories from various researchers and authors about how you can work with safety regarding children's development and learning. My conclusion is that safety is a very important aspect when it comes to learning and for the overall development of children.

The purpose of this study is to describe the three most significant pedagogical ideas and their impact on the national curriculum from the concept of communication. As the school is a social learning community this study looks at some teachers? perceptions and experiences of teaching with a communicative approach, and the obstacles they claim to meet. The educationist Kieran Egan argue that these three pedagogical ideas are incompatible and that a curriculum that compromises them is doomed to fail. He mean that a new coherent view on education is required and should be based on students? understandings.

The idea to create authentic learning situations where students are highly integrated made me want to try to develop a new method in the course Restaurant and Catering B MAKU 1208 (another field practicing cuisine). In my quest to do just the practical part as rewarding, stimulating and efficient as possible for the student, I planned for a training model with   focus on group interaction.The implementation of the model for learning was to strengthen students confidence both in themselves and in each other, stimulated to greater cooperation and it has also provided an incentive to the student's own development but not least, a growing self-confidence for many students. Several have also had an increased sense of knowing something, to have something to contribute and that their labour input actually was needed. While highlighting that further education to seek knowledge strengthens the individual's skills and consolidates and increases deeper knowledge in the professional field.In conclusion, training should be done in both individual and group basis for optimal learning process..

SyfteSyftet med studien var att undersöka inter- och intrabedömarreliabiliteten för rörelseanalysen ?9+ screening batteri? hos en grupp unga fotbollsspelande flickor med avseende totala bedömningen av rörelseutförandet. MetodTolv friska fotbollsaktiva flickor (13-14 år) deltog i studien. Testerna genomfördes vid två tillfällen med sju dagars mellanrum. Screeningbatteriet bestod av elva funktionella test samt tre tilläggstest. Utförandet bedömdes av sex sjukgymnaster som alla hade liten vana av att använda testbatteriet. ResultatGruppen hade ett medelvärde på 17.2 ± 1.3 (95 % CI; 14.4?19.9) vid testtillfälle 1 och 17.4 ± 1.8 (95 % CI; 13.4?21.5) vid testtillfälle 2 av totalt 33 poäng.

The purpose of the project was to design an electric bicycle to offer thetarget group youth an attractive alternative to mopeds. The basis for theproject was user studies in which young people were interviewed andobserved in their daily environment.The project resulted in a product, designed with the focus of integratingthe battery to the shape, to create a wholeness that is simple andintuitive.!The product is easy to use and operate, with an automatic transmissionengine.! A smart modular system allows the user to choose design withmudguards, rear rack, or without. The battery design is based on "cradleto-cradle" to maximize the battery life and minimize environmentalimpacts.It was very fun and rewarding to have the opportunity to present theresults for the youth who showed great interest in the product.The project was conducted in collaboration with Designit and Cycleurope..

Introduction: Dental health globally is not equally distributed as shown by caries prevalence is higher in areas with more immigration outside Scandinavia and Western Europe and areas with lower socioeconomic status. To reduce the health inequalities in Borås, a dental health project was made in five kindergartens in the district Hässleholmen. Purpose: The purpose of the survey was, by interviews with the actors involved (teachers, children, parents and the public dental service) find out the views of the project, and whether the project is relevant and should continue. Method: The method used was qualitative interviews with the actors involved in dental health project. A total of 21 interviews were then consolidated by a qualitative content analysis.

For many years, there has been a housing shortage in Sweden. Many have been expecting a construction boom in the housing sector, but that has yet to arrive. With the current legislations and guidelines surrounding modern, energy efficient housing; production costs have increased dramatically in recent years. As a result, having a negative effect on housing production despite the high demand for homes.This exam work is carried out on a construction project of Sjötorpshus AB and its purpose is to evaluate how to optimise the construction process for the production of a new residential settlement, "Kv.Hunden", located in Katrineholm. In an interview with the company's MD, Pär Knutsson, four main issues were defined to focus on.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The study aims to investigate student?s attitudes and experiences of information retrieval on the Internet, as tools for learning. I have been interested of their own views about their own knowledge and experience in the subject, information seeking on the Internet. The focus is on what they perceive as problematic, what skills they consider they have and what needs they have in terms of teaching. Data were collected via questionnaires.