Due to an increasing global market with a growing competition and an escalating technologydevelopment the demands on companies today are increasing. To maximise the output fromtheir recourses they need to be more efficient. The research on product development and how toensure the efficiencies in the process are extensive and companies could by adapting andimplementing the result of this research use its benefits.This master thesis is made for Knightec AB with the aims that through interviews anddiscussions with three companies investigate, collate, justify and give proposals for productdevelopment process together with supporting methods and procedures for technical projectmanagement. Besides Knightec AB three other companies located in Sweden has beenparticipating in this study. Through semi structured interviews and discussions in focus groupsinformation from the three involved companies were obtained.

The transformation within the swedish infrastructure has been a slow process from thebeginning of time. For almost a decade, the traditional form of contracting regardingbuildings and foremost infrastructure has evolved contracting involving the owner to definethe outcome of the product, regardless involvement from the supposed contractor. As forthe swedish market, the traditional design-bid-build (DBB) have been the primary choice ofcontracting. Although changes have been made over time regarding contracting formswithin the road administration, the railway sector has not improved or justified changesregarding choice of contracting, they have conducted same contracting relationshipsbetween them and the contractor.This bachelor thesis, conducted at the Swedish railway administration with supervision ofprofessor Kristian Widén at Lunds University, explores the forces behind the new era ofcontracting within the railway administration. This bachelor thesis focuses mainly oncontracting regarding design-build-operate-main (DBOM), the new contracting formulabetween the owner and the contractor.

The transformation within the swedish infrastructure has been a slow process from thebeginning of time. For almost a decade, the traditional form of contracting regardingbuildings and foremost infrastructure has evolved contracting involving the owner to definethe outcome of the product, regardless involvement from the supposed contractor. As forthe swedish market, the traditional design-bid-build (DBB) have been the primary choice ofcontracting. Although changes have been made over time regarding contracting formswithin the road administration, the railway sector has not improved or justified changesregarding choice of contracting, they have conducted same contracting relationshipsbetween them and the contractor.This bachelor thesis, conducted at the Swedish railway administration with supervision ofprofessor Kristian Widén at Lunds University, explores the forces behind the new era ofcontracting within the railway administration. This bachelor thesis focuses mainly oncontracting regarding design-build-operate-main (DBOM), the new contracting formulabetween the owner and the contractor.

The transformation within the swedish infrastructure has been a slow process from thebeginning of time. For almost a decade, the traditional form of contracting regardingbuildings and foremost infrastructure has evolved contracting involving the owner to definethe outcome of the product, regardless involvement from the supposed contractor. As forthe swedish market, the traditional design-bid-build (DBB) have been the primary choice ofcontracting. Although changes have been made over time regarding contracting formswithin the road administration, the railway sector has not improved or justified changesregarding choice of contracting, they have conducted same contracting relationshipsbetween them and the contractor.This bachelor thesis, conducted at the Swedish railway administration with supervision ofprofessor Kristian Widén at Lunds University, explores the forces behind the new era ofcontracting within the railway administration. This bachelor thesis focuses mainly oncontracting regarding design-build-operate-main (DBOM), the new contracting formulabetween the owner and the contractor.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

The transformation within the swedish infrastructure has been a slow process from thebeginning of time. For almost a decade, the traditional form of contracting regardingbuildings and foremost infrastructure has evolved contracting involving the owner to definethe outcome of the product, regardless involvement from the supposed contractor. As forthe swedish market, the traditional design-bid-build (DBB) have been the primary choice ofcontracting. Although changes have been made over time regarding contracting formswithin the road administration, the railway sector has not improved or justified changesregarding choice of contracting, they have conducted same contracting relationshipsbetween them and the contractor.This bachelor thesis, conducted at the Swedish railway administration with supervision ofprofessor Kristian Widén at Lunds University, explores the forces behind the new era ofcontracting within the railway administration. This bachelor thesis focuses mainly oncontracting regarding design-build-operate-main (DBOM), the new contracting formulabetween the owner and the contractor.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

The study was performed for the Swedish Regional Forestry Board in Södra Götaland. The study examines broadleaf plantations on former farmland that were planted between 1991 and 1996 with subsidy payments for conversion of farmland into forest. In particular, the study reviews forests planted in 1991-92 and 1994-96. In the early 1990s, Swedish agriculture was deregulated and direct subsides to farmers ended. The Swedish state instead granted farmers financial support and offered incentives for conversion of farmland and investments in order to make their unproductive land productive. The state supported conversion of farmland to broadleaf forest, forest for energy biomass production, or establishment of wetlands on former farmland. The County Administrative Boards and Regional Forestry Boards together monitored the planting of broadleaf forests.

Värdepappersmarknaden fyller en mycket central plats i vårt samhälle då många affärer görs där och betydande belopp omsätts. De marknader där man omsätter kapital och risk är indelade i aktiemarknad, kreditmarknad och derivatmarknad, varav fokus här ligger på aktiemarknaden. På denna marknad, som även kallas riskkapitalmarknaden, omsätts i första hand aktier, konvertibler och teckningsoptioner. Marknaden omgärdas av ett rikt regelverk som består av lagreglering, självreglering och etik. Syftet med dessa regler är att aktiemarknaden ska vara effektiv, likvid och god genomlyst samt att allmänheten ska kunna känna förtroende för den.

Våren 2011 beslutade Röda Korset i Sverige att sluta skicka skänkta kläder som bistånd till katastrofområden. Röda Korset ställdes nu inför frågan vad de ska göra med de skänkta klä-derna för att omvandla dem till en resurs.Uppdraget var att i samarbete med Zäntrumprojektet och Röda Korsets secondhandbutik Ku-pan förädla de skänkta kläderna på ett miljövänligt sätt. Tanken är att Zäntrumprojektet ska sy om de skänkta kläderna till nya produkter som sedan ska säljas i secondhandbutiken Kupan.Syftet med den här uppsatsen är att finna ett sätt att förädla de skänkta kläderna och skapa nya produkter av dem. Vidare ska de skänkta kläderna skapa bättre resurser till Röda Korset som de kan tillgodogöra sig i sitt välgörenhetsarbete. Produkterna ska vara skapade på ett sådant sätt att de avger minsta möjliga avfallsmängd, främjar hållbar utveckling samt är attraktiva för Röda Korsets secondhandbutiks kunder.