The purpose of our report was to analyze the effects of youth drug abuse on the families concerned. Youth drug abuse made us wonder about the effects on the family as a whole, of those involved with drug abuse. To answer this question, we decided to employ an empiric study in the form of interviews with four teenagers, five parents and four drug counselors. Because our intent was to understand rather than try to measure the problems involved, we decided on a qualitative method. Our method built upon semi-structured interviews using open questions, where the interviewees were free to express their own thoughts and opinions.

This thesis was performed at Zetterbergs Industri AB. Zetterbergs is designing, building and mounts body systems for trucks, including dumpers and tippers. The assignment for the thesis was to design a door hinge for a spreader gate. The spreader gate is the top of the two tailgates on a dumper or tipper and opens back and outwards when tipping the cargo. The spreader gate controls the mass flow of the material being tipped.

Syftet med rapporten var att studera möjliga återvinningstekniker för Ragn-Sells. För detta användes litteratursökning och intervjuer. Återvinningstekniker som studerats är mekanisk bearbetning, mekanisk återvinning, kemisk återvinning och viskostillverkning. Flera underklasser till dessa metoder studerades också, liksom flera sätt att tillverka återvunna produkter. Rapporten nämner ett urval av återvinningstekniker och försöker inte nämna alla tillgängliga återvinningstekniker.Återvinningsteknikerna har sorterats enligt prioriteringen i EU:s återvinningsdirektiv (2008/98/EG).

This degree project has been performed along with Classic Garden in Gothenburg andBallongfirman Far & Flyg in Stockholm. Together we have developed a sun- wind- andrain protection. The protection is permanently assembled and mainly intended for publicenvironments as restaurants and outdoor cafés.The design on the sun protection was already done so our task has been to develop theconstruction and to build a prototype in scale 1:4 and one in scale 1:1. The look of thesun protection is approximately as the name implies, equal an igloo. The lamellae aregoing to fold out in different steps all the way down to the ground and the both sides willbe independently of each other.The first stage in the project was to develop differently principle proposal on how thefunction will work when folding in and out the protection.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

This thesis has been made in cooperation with the forestry machinery producerEco-Log in Söderhamn. The focus of the thesis has been to find a cheaper wayto open the large engine hood of the company?s harvesters. The goal was tofind a solution that could increase the value for the customers by being saferand simpler to use, or, at the least, keep these values at an equal level comparedto the previous solution.In order to make it possible to CE-mark the new solution, it was importantMachinery Directive that came into effect from the beginning of 2010.To begin with, a specification of requirements was set up. Thereafter, anumber of different basic concepts was retrieved and evaluated.

This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.

This analysis explores the psychosocial aspects in relationship to the occupational role as a correctional officer in Sweden. Historically prisons are hierarchically structured with a military organisation used as the basis for a role model. This military type structured organisation is designed to keep the prisoners under constant observation, thus providing direct authority and control by the prison guards over the prison inmates. Data obtained from investigations conducted by the Swedish Government indicate a direct link between the prisoners's living conditions and the prison employee's work duties and environment. The data strongly suggests that the work needs of prison guards have significant priority over the general work conditions of inmates, thus showing that the status for the occupational role was relatively low.

New rules for bank capital adequacy were introduced in 2013. This caused a changein funding of real estate companies. The bank could not cover as much of thecompanies funding?s as before and they had to explore other funding opportunities,such as bonds. Bond funding in Swedish real estate companies regularly consists ofunsecured corporate bonds and the secured ones are not that common.

This bachelor thesis aims to draw attention to sound in the heritage sector in Sweden. In particular, to thesoundscapes that can be identified in our cultural heritage environments. Sounds in an environment, here calledsoundscapes, affect our perception of the environment and how we remember it.To find out how the heritage sector uses and would be able to use sounds, I have firstly studied if audio recording iscomparable with the visual photographic image. I then present examples of sound documentation concerning theconservation of built environment. In addition, I have interviewed five key informants who all have a centralresponsibility for five cultural heritage environments.

???Information Technology is an essential part of the society today, not least in large ???organisations dealing with sensitive information. An example of such an organisation is the Swedish Armed Forces which indeed is in the need of ways to ensure information security in their Information Technology systems. The means which is used is an authorisation and accreditation process.All Information Technology systems go through a life cycle which includes realisation, usage, development and liquidation. In the Swedish Armed Forces the lifecycle is an authorisation process.

The Swedish energy companies have several different systems for data collection of the energy consumption of their clients. Often computerized remote meter readers are put in practice in order to register the energy consumption of large companies. The majority of household clients, however, are read off by the assistance of manual methods. Household power consumption is read off once a year. As a result, these clients are not debited for their actual consumption; their invoices during the year are the result of estimations. At times when the electricity supply system is highly loaded, electricity is more expensive.

Vattenfall AB is a large producer of electric energy where approximately half of the energy comes from hydropower. Vattenfall Hydropower has got almost a 100-year old history and the company has developed a lot since 1909. After that the number of power plants increased and the competition got more intense, there were higher demands on the reliability. One way to secure the reliability with a good satisfaction at the power plants is to implement a maintenance method named Reliability-Centred Maintenance. RCM is a result of the introduction of the complex aeroplane Boeing 747 in the 1960?s.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

Syftet med examensarbetet är att skapa kunskap och reflektion för mellanstadiebarn för att bidra till folkbildning i samhället och hjälpa till i arbetet med att göra Jönköpings läns museum till nästa generations museum samt Sveriges bästa museum. För att kunna skapa kunskap och reflektion har bilder av miljöer från 1600-talets Visingsborg tagits fram och kombinerats med bilder från nutiden. Allt är framtaget med hänsyn till mellanstadiebarnen och museets olika krav. För att ta fram de olika kraven har museets personal intervjuats. För att få en bild över hur mellanstadiebarn fungerar och hur de tar till sig kunskap har litteratur studerats, en intervju har gjorts med en mellanstadieklass samt en intervju med en bildpedagog.