Sök:

Sökresultat:

1591 Uppsatser om Intelligence operation - Sida 27 av 107

GNSS-Styrning : Information för platschefer

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

Shared IT Service Center i kommuner

To be able to maintain an adequate ITservice for various users and needs,more municipalities are looking at thepossibility for mergers of local ITdepartments. One solution for mergingmultiple services/functions and creatingsynergy opportunities is called SharedService Center (SSC). The concept of SSCis that the administrative serviceitself becomes a core activity withinthe organization. The aim of this thesisis to provide municipalities who areconsidering a merging of their local ITdepartments with recommendations on howto design the Shared IT Service Center.Recommendations are outlined based on ananalysis of IT-management literature,reports and by conducting a study onthree ongoing collaborations.The conclusions drawn from the studysuggest guidelines for the design of aShared IT Service Center formunicipalities. These are as following:Create a vision associated with aspecific and structured target state.Identify needs for different targetgroups in municipalities and set acommon standard.Create a clear and practical model/SLAappearance of the cooperation andagreement.Ensure the individual municipalitiescommissioning skills in order to notlose it in the context of a common IToperation.Find an organization that is democraticfor member municipalities andfacilitates long-term partnership.Specify the operation and maintenance sothat it can be regulated and controlledEstablish a common help desk.Establish a common standard andconsolidated infrastructure before theintroduction of a common technology platform..

SIRA-skolan i Betlehem -En fallstudie

This essay is derived from a case study about the SIRA school in Betlehem. SIRA is classified as a special education school with financial support from the Swedish International Relief Association. SIRA acts to provide support for children with reading and writing difficulties in their daily school work.The study's aim to describe the context for SIRA's specialized educational activity. The formulated questions should provide answers to which factors that influence SIRA's work, its goals, development, and the distinguished pedagogical approach.During the research comprehensive interviews were conducted with parties which can influence the way schools operate and provide the necessary support for students. Factors that influence the school's operation are analyzed from a ecological development perspective created by Urie Bronfenbrenner. The theory advocates that a student's development and interaction mainly comes from participating in activities, social roles and relations.This constant process of mutual adaptation between the developing individual and its surrounding environment is to be defined as its own entity. The result shows that SIRA's practice a special educational operation with focus on an approach which strengthens the student's identity and communicational skills..

BI M i förvaltningsskedet med avseende på konstruktion.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Vakna lokalbedövade patienters upplevelser

Patients who undergo surgery receive general anaesthesia or any form of conduction anaesthesia during the operation. For most people it is strange, unexpected and for many something completely new to be a patient and undergo surgery. Awake conduction anaesthetic patients? experiences from the intraoperative period were little studied. The purpose of this study was to examine awake conduction anaesthesia patients? experiences.

Biblioteket i centrum : Ett utvecklingsprojekt för bibliotek och landsbygd

The structure of the Swedish public library field has been evolving during the last decades. The traditional mission of educating the citizens to become responsible, democratic and knowledgeable members of society has in a way led to the integration between public and school libraries. Lately new co-operational models have been under debate and a sense of resistance has arisen because of the economical and market influences. In parallel with closure of library branches new libraries have evolved in malls and wash houses and some with self-service with no use of librarians. This work shows how co-operation in rural areas finds the common goals for the people living there who are concerned about keeping the service needed including the public library and thus using existing means and crossing borders of commercial thinking.

Studie av skyddsavstånd mellan bergvärmeanläggning och skyddsobjekt i ett vattenskyddsområde

During installation and operation of a geothermal heat pump system leakage of an antifreezing agent can appear in a borehole and leak out in surrounding groundwater. To guarantee high quality drinking water for generations to come Sweden has dedicated some areas as water protection areas. The local authority gives permits for the installation of heat pump systems within water protection areas. Before giving a permit the local authority makes an evaluation of the risks involved in installation and operation of the system within the area. By keeping a certain distance between the protected object in the area and the heat pump system the risk of polluting the protected object with an anti-freezing agent can be reduced.This thesis makes a comparison between three different methods of calculating an appropriate distance between the protected object and the heat pump system.

Transientanalys för Forsmark block 2 och 3 : Studie av hur val av driftpunkt och pumpreglering påverkar torrkokningsgränsvärdet

The dry out criterion (MCPR) has been calculated for the most limiting H2-events for Forsmarks unit 2 and 3, at operating points that are normally not analyzed before each cycle. The operating points that normally are regarded as the ones with the lowest margin to dry out are the ones where the thermal power is the highest at agiven recirculation flow. This report shows that this is not the case for Forsmark 3. MCPR-values at partial power operating points are higher for the limiting case inside rather than on the boundary of the region of operation. It is therefore recommended that the method for determining the dry out criterion for Forsmark 3 is revised to account for this effect.

Ägarlägenhetsförrättningar ur ett kostnadsperspektiv : Hur utvalda faktorer påverkar förrättningskostnaden och den framtida förvaltningen

The purpose of this study is to get the cadastral procedure for condominiums to become more affordable. The aims of the study is to examine how the number of condominiums, the number of joint facilities and the number of joint property units that are formed in a condominium cadastral procedure in Sweden influences the cadastral procedure cost. To get an overall perspective the study also explores how the chosen forms of co-operation have worked out in association management.A condominium is a type of three-dimensional property unit, which may only contain one residence.  This form of property formation has been allowed in Sweden since 1 May 2009.  At the end of 2014 less than 1000 condominiums had been formed despite the legislator?s expectations for 3000-5000 condominiums a year. The property unit can have access to necessary facilities, not available within the property boundaries, by establishing joint facilities or form joint property units.

Hur spinalbedövade patienter erfar den intraoperativa fasen

Patienter som genomgår en operation har normalt ingen kontakt med varken operationssjuksköterska eller en anestesisjuksköterska innan ingreppet. En första kontakt sker oftast när patienter anländer till operationsavdelningen, då är tiden knapp och gör det svårt att tillsammans med patienter planera vården. En perioperativsjuksköterska har ett etiskt ansvar att bjuda in patienter till en vårdande gemenskap och skapa förtroende genom sina möten med patienter, vilket bäst kan göras genom ett perioperativt samtal någon dag innan operationen. Idag ges sällan den möjligheten.Det finns få studier gjorda om hur spinalbedövade patienter upplever tiden under sin operation. Därför riktas uppmärksamheten i denna studie mot hur spinalbedövade patienter erfar den intraoperativa fasen.

?Utredning av fosfatets inverkan vid pressning av rullar i LRQ MEDIUM BEARINGS

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Funktioner och roller i skolbiblioteket ? En studie av två F-6-skolor i Växjö

The purpose with this study is to examine school-leaders?, school-librarians? and teachers? expectations and aims for their school-libraries at two different schools in the city of Växjö. The study is based on these five questions:· How do school-leaders, school-librarians and teachers think about learning?· What function does the school-library have?· What roles do school-leaders, school-librarians and teachers have in the school-library?· How do school-leaders, school-librarians and teachers experience the co-operation in the school-library?· How would school-leaders, school-librarians and teachers wish that the co-operation should be?To be able to answer these questions I have done thirteen qualitative interviews and studied literature relevant to the subject. Three different theories are used as a theoretical framework; the traditional perspective, individual constructivism and social constructivism.

Produktionseffektivisering av arbetsmoment inom byggsektorn En tidsstudie för standardisering av arbetssätt

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Räddningstjänst : Definition, ansvar och samverkan

The purpose of this legal dogmatic Bachelor Thesis is to define the legal definition of ?a rescue service? and illustrate the division of responsibilities between national authorities and the municipalities with regards to the execution of emergency response operations.?A rescue service? means the emergency response actions that national and municipal authorities are legally obliged to provide to prevent or minimise injury to people and damage to property or the environment when emergencies occur or seem imminent. In the following cases a national authority is responsible for providing the requisite rescue service:1. Search and rescue (air) ? the Swedish Civil Aviation Authority is the responsible authority;2.

Situationen i Adenviken : en del av Fourth Generation Warfare?

Följande uppsats tar sin utgångspunkt ur den rådande situationen i Adenviken som präglas av illegal piratverksamhet. Adenviken med dess särskilda karaktäristik granskas i syfte att undersöka om det av militärteoretiker formulerade begreppet ?Fourth Generation Warfare? i någon mån är applicerbart på situationen. I syfte att svara upp mot uppsatsens frågeställning avhandlas begreppet 4 GW och dess historik, innebörd samt utveckling. Den empiriska delen av uppsatsen behandlar Adenviken och fokuserar på situationen i landet Somalia med dess pirater och deras illegala verksamhet.

<- Föregående sida 27 Nästa sida ->