Purpose: The purpose of this thesis is to clarify and evaluate the concept of scenario planning.Methodology: Our research methodology has a qualitative approach and uses deductive reasoning. The theoretical field of strategy formulation has been reviewed and in specific the concept scenario planning was unravelled and mapped. Thereafter, our model was tested in a case study where the empirical data was collected through personal interviews. Theoretical field: Literature and articles from the strategic management field have been reviewed with a focus on strategy formulation, scenario planning and Williamson?s theory for the creation of a portfolio for strategic options.Empirical base: Personal interviews and secondary sources such as financial reports, articles mainly from industry media and articles found in the databases ELIN and Affärsdata.Analysis: The analysis work constitutes the testing of our model for scenario planning, integrated into Williamson?s portfolio of strategic options for the future.Result: The work has resulted in a clarified model of scenario planning with links to strategic management schools.

Questions concerning the Cultural Heritage must be integrated in social planning.Therefore there is a need for adequate methods for cultural environmental analysis, toreceive knowledge that is relevant in an integrated conservation. The thesis is a review ofmethods for cultural environmental analysis and discusses the qualifications necessary fora method in order to receive adequate information as well as it discusses what kind ofinformation to be considered relevant. The thesis also analyzes a specific method forcultural environmental analysis in order to exam if it has got the qualifications concludedas necessary if it is to be used in an integrated conservation. The conclusion is that amethod for cultural environmental analysis should collect information about the entireenvironment (integrated information about nature and culture, in a historical perspectiveand how it is today), about social structures, physical remains (buildings etc) and what thecollected information tell about the history of the studied area, as well as what is importantin the landscape of today. Information about how the environment should be treated in thefuture is also of importance.

Questions concerning the Cultural Heritage must be integrated in social planning.Therefore there is a need for adequate methods for cultural environmental analysis, toreceive knowledge that is relevant in an integrated conservation. The thesis is a review ofmethods for cultural environmental analysis and discusses the qualifications necessary fora method in order to receive adequate information as well as it discusses what kind ofinformation to be considered relevant. The thesis also analyzes a specific method forcultural environmental analysis in order to exam if it has got the qualifications concludedas necessary if it is to be used in an integrated conservation. The conclusion is that amethod for cultural environmental analysis should collect information about the entireenvironment (integrated information about nature and culture, in a historical perspectiveand how it is today), about social structures, physical remains (buildings etc) and what thecollected information tell about the history of the studied area, as well as what is importantin the landscape of today. Information about how the environment should be treated in thefuture is also of importance.

The idea to create authentic learning situations where students are highly integrated made me want to try to develop a new method in the course Restaurant and Catering B MAKU 1208 (another field practicing cuisine). In my quest to do just the practical part as rewarding, stimulating and efficient as possible for the student, I planned for a training model with   focus on group interaction.The implementation of the model for learning was to strengthen students confidence both in themselves and in each other, stimulated to greater cooperation and it has also provided an incentive to the student's own development but not least, a growing self-confidence for many students. Several have also had an increased sense of knowing something, to have something to contribute and that their labour input actually was needed. While highlighting that further education to seek knowledge strengthens the individual's skills and consolidates and increases deeper knowledge in the professional field.In conclusion, training should be done in both individual and group basis for optimal learning process..

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

This Masters thesis is concerned with the complex planning process of setting up a citizen bureau in a public library. The aim is to find out how citizen bureaux are designed and to suggest a simplified model of strategic planning. The planning process is studied from a business perspective in the library context, and this perspective is also used to study citizen bureaux and their written plans elsewhere. A combination of qualitative methods are used: observations, focus group discussions and interviews. Observations in the public library showed a great need for an environmental analysis as well as structure to the planning process.

Companies worldwide strive to reduce costs and capital tied up in stock. At the same time, the need for short delivery times requires efficient logistic flows. In order to meet customer demands an efficient warehouse activity is required.The purpose of this study is to develop a model for designing a warehouse system regarding to working environment and safety. The model is primarily designed and based on literature reviews of scientific articles and books, own knowledge and the authors previous work experience in the industry.The thesis has been done at Sandvik AB, the department Precision strip in Sandviken. Sandvik is a high-technology engineering group with advanced products and a world-leading positions within selected areas.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

The role of Art in Healthcare and its requirements through a study of Diagnostic Center (DC), a Hospital with Art and Architecture integrated.Issues: Who selected Art for DC and on what foundations? How are Art and Architecture integrated, and what is the established knowledge of Art in Healthcare?Studies of reference material, theses, research articles and interviews. Hermeneutic and discourse analyses were used.Theorists: Barthes, Bourdieu, Foucault, Arnheim, Sjögren, Rasmussen.Results: A regional group selected local Art, mainly nonfigurative, and integrated it early in the architectural process. A stimulating non-traditional hospital environment with a modern design and two artists created work specifically for the environment.Art affects our Health and Caring Sciences is a scientific field that is studying how art affects patients and staff. It is relatively new but it is growing into a vast field of research, learning more about Art's effect on Health..

Syftet med denna studie har varit att söka finna ett samband mellan dialogsystem designade enligt designmönstret Gameplay Integrated Conversations och meningsfullt spelande. Två prototyper har skapats där den ena haft stöd för tidigare nämnda designmönster och den andra inte. Dessa testades på två grupper om fem personer som återgav sina upplevelser genom ett frågeformulär. Resultaten visade att gruppen som spelade prototypen med Gameplay Integrated Conversations inte upplevde de unika egenskaper som det medförde. Dessutom visade undersökningen att gruppen utan stöd för designmönstret upplevde mer meningsfullt spelande.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.