To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

The visions of the United Nations concerning sustainable development and conservation of biodiversity can only be realized if the human population succeeds in creating coexistence between human and wildlife. Landscape architects are able to influence on how landscapes are to be maintained and developed. The negative impact of infrastructure on wildlife has become a critical problem in Sweden and other parts of Europe. Wildlife crossings has been developed as a solution for the problems of road barriers in the landscape. The crossings are made to give animals a better opportunity to cross roads.

A uniform environmental rating system for green buildings is demanded in today's society, where the requirements of the energy consumption for real estate are increasing. There are several different systems around the world used to rate buildings, all with different assessment criteria and starting points, which make it difficult to compare environmental rated buildings with each other.The purpose of this paper is to acquire knowledge about the differences between the Swedish environmental rating system Miljöklassad Byggnad and the American LEED, to discover which system is most advantageous. We also examine whether environmental rating affect the value of a property.Miljöklassad Byggnad is relatively simple structured, which makes it possible for private individuals to rate their property. LEED is better structured on the other hand in the case of environmental classification of commercial properties, because there are manuals for among others hospitals, schools and retail. The rating system for Miljöklassad Byggnad is good since the system seeks to fix the number of errors and deficiencies as soon as possible.

Holmen Skog has in some places in their operation area access to timber trucks with centre mounted scrapers. They make transportation more flexible and reduce reliance on contractors for road maintenance. The trucks with centre mounted scrapers have a higher tare weight, making them less productive and therefore they receive compensation with a 0.75 % increase on transportation price. The purpose of this study was to investigate what actions a timber truck with centre mounted scraper can perform with acceptable quality in winter, and to examine if it is an economically profitable solution for the truck operator and charterer. The study was done in three stages; interviews, performance analysis of the transportations carried out and an economic analysis with the help of Sven Erik Gilles spreadsheet tool. The study included the districts Delsbo and Hudiksvall.

This master?s thesis deals with integrating simulations using Agilents Electronic Design Automation tool ADS with customized Matlab scripts, for solving complex analog and digital radio architectures. In particular, it addresses predistortion, realized in the digital domain, of power amplifiers, modeled in the analog domain. The former is implemented in Matlab while the latter is implemented in ADS. Two versions of integrating the two systems have been tested: 1) Iterative approach on sample basis and 2) Scheduled batch solution by matrix inversion.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

This Master of Science thesis is conducted at the faculty Integrated Product Development at theRoyal Institute of Technology and in cooperation with EssNet Interactive AB, both situated inStockholm. In the report the final results and the road to get there is described as well as thedesign process and how the process is used to obtain the goal of this thesis.The author of this thesis has developed the design and the function of an interactive videoterminal (IVT) and by using semantics created an encouraging gaming design. The projectspurpose was to change the anonymous withheld shape and produce an experience of gamingmachine that has been absent. The work was aimed to answer the question: How does oneproceed to develop the IVT and by using semantics creating an understanding of gamingmachine?In general the author wants to show that small changes, with the help of design and its signals,can completely change the overall picture of a product.

The demand for district heating is expected to decrease in the future, due to competition from heat pumps and energy efficiency measures in buildings. Development of existing district heating systems is therefore necessary for district heating companies to maintain market shares. This Master?s thesis describes and investigates the heat and electricity production and profitability of a combined Organic Rankine Cycle (ORC) and heat pump that is integrated with an existing district heating system. The studied district heating system is utilizing heat from waste incineration. In Sweden waste constitute 20 % of the fuel mix used in district heating systems, and this share is expected to increase in the future.

Abstract The purpose of this paper is to investigate teachers´attitudes to and work with outdoor education in preschool. The aim is also to identify the opportunities and barriers that exist to conduct outdoor education. In my research I have interviewed six preschool teachers in a medium sized municipality, where five of the teachers worked in the suburbs to the Big City and one teacher worked in the downtown Big City. All respondents in the study were in favor of conducting outdoor education. The respondents claimed that it promoted children´s health and motor skills. The result also shows that the teachers saw a great opportunity for learning related to outdoor education, by using the resources of nature.

Biogas is a gaseous fuel, rich in methane, produced through a biological route in an anaerobic digester. A gas engine generates combined heat and power, which can be used at the farm to reduce energy cost. The process also generates a digestate, with better utilization of nutrient compared to cattle manure. The aim of this study is to analyze the profitability of a farm-scale biogas plant for combined heat and power (CHP) at Wapnö. Wapnö is an agriculture company located in the southern part of Sweden.

The aim of this study was to examine and compare two municipalities? approaches to deal with men?s violence as a social problem. Further the aim was to analyze social workers? opinions about interventions for men who practice violence in heterosexual relationships. The study has got a qualitative approach and we did a subjective selection where we chose to apply semi-structured interviews with social workers who work with domestic violence.

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

Syftet med denna studie var att se om en strukturerad vårdform vid livets slut såsom Liverpool Care Pathway for the dying, LCP, har någon inverkan på omvårdnaden av de palliativa patienterna jämfört med ordinarie palliativ vård samt att beskriva vårdpersonalens upplevelser av LCP. Studien genomfördes som en systematisk litteraturstudie där underlag inhämtades genom sökning av veteskapliga artiklar i databaser samt att artiklar söktes manuellt på Högskolan Dalarnas bibliotek. Artiklar har även sökts från referenser på andra artiklar direkt på titeln och vid sökningarna användes sökorden både enskilt och i kombination varvid 10 artiklar valdes ut till resultatet. Resultatet visade att efter införandet av LCP förbättrades dokumentationen, patienterna hade inte onödiga livsförlängande behandlingar. Symtomen i form av smärta, oro/ångest och slemproduktion var mindre, samt att kommunikationen mellan vårdpersonal, närstående och patient förbättrades.

The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser data against the reference instrument data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement data was also used for the swiveling laser data.

The intention with this study is to investigate how schools are affected by state and municipal documents when they organize the education for children with special needs. The study is based on following questions.How do decisions on state and municipal level of politics affect the decisions that the principals make concerning organization, and do the school leaders think that the decisions are made on the right level of liability?What is the relationship between economic decisions and pedagogical decisions?What decides whether the schools have children with special needs integrated in their ordinary classes, or if they receive segregated remedial courses, and what are the views on an equivalent education?The study is conducted through interviews with principals of three schools, one politician on municipal level and one special education teacher. The interviews are linked to an historic background as well as current studies and discourses. The study shows that there are contradictions between state, municipality and school goals.