The main purpose of this study is to, in the educator?s point of view, try to find out how pre-schools approach science and technology along with Information and Communication Technology (ICT). The survey was conducted based on qualitative interviews where two preschools participated, a total of seven teachers were interviewed. One of the preschools only has access to a computer, and the other preschool is able to use both computer and tablets in their preschool activities. The results of this show that the teacher?s thoughts about ICT are positive and that they consider it as an important part of their work and have many areas where it is useful.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Summary The purpose of this research is to find out if technology is being used in pre-school activity, to what extent, in which way and what part the pre-school teachers believe they should have in the process. To gather information for the research, questionnaires were sent out to all pre-schools in a municipality in central Sweden. Based on that information two were chosen for observations and interviews. The work with technology in pre-schools may vary. Some pre-school teachers believe they do not adopt any technology at all when asked and all this because of their own lack of interest or knowledge, while others believe it is contained in all of their educational activities.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

This degree project has been carried out by Carolina Rapp and Jenny Tauson, students at Innovation and Design Engineer program at the Faculty of Technology and science at Karlstad University. The project was carried during Spring of 2009 and took 15 weeks of full time work.  Doppelmayr/Garaventa Group is an Austria/Switzerland corporate group and its associated company Doppelmayr Scandinavia lies in Sunne, Sweden. Doppelmayr/Garaventa Group is the world quality and technology leader in ropeway engineering. The degree project goal was to develop a new shaping of a surface lift. There are two kinds of surface lifts, platter and T-bars. The two kinds of surface lifts have some variation in design but only minor differences.

The Uppsala based company Q-linea develops procedures, instruments and systems for protein and nucleic acid analysis. The components in such an instrument are controlled by microcontrollers. Microcontrollers are computers in one singular chip that can be used in a wide range of applications such as cars, toys or in this case an analysis instrument. When developing a new instrument for biochemical analysis, Q-linea needed new software for controlling and communicating between the components in the instrument. The process of developing this software is the subject of this thesis.The project included research of microcontrollers and the components in the instrument.

In the construction industry today there is a significant technological revolution goingon. New methods for automated processes and information management are developedcontinuously. Intense studies are currently taking place to ensure ways and means toembrace the new technology of BIM.At the present, environmental certification systems are considered cumbersome andchallenging. However, the increasing demands of sustainable development in the constructionindustry imply that the environmental certifications will not disappear. ThisMaster Thesis examines the possibilities to apply BIM technology within the field ofenvironmental certifications to streamline the processes.The applications that provide the best opportunities are:- To use BIM to be able to, during the design stage, dynamically evaluate the resultor score a certain building will achieve.- To avoid unnecessary work through collection of data for calculations directlyfrom a BIM-model.- To be able to automate certain time consuming calculations that are currentlyperformed manually.- To automatically examine the completed model to ensure that the demands arefulfilled.The possibilities to use BIM within these areas are however limited by the technologyitself.

The purpose of this study is to explore how preschool teachers succeed in their mission to conduct work that will enhance children's interest and knowledge in technology. The study was conducted by qualitative semi-structured interviews among eight teachers at seven preschools in the same municipality. The method was chosen because I wanted to get as detailed and full answers as possible. I also wanted to find out their individual perceptions. The result shows that most of the teachers think that they have insufficient knowledge to practically work with technology. At the same time they?re expressing that technology is a broad area that sometimes is a little more complicated than it needs to be.

In our study, we investigated how the streamed TV domain relates to existing design principles for web design. Further, we have investigated whether there are specific characteristics of the domain that the design principles do not cover. In the survey we have studied two sites which are representative of the streamed TV domain. Finally, we discuss how applicable the design principles are for the domain and the specific characteristics that would require new or further developed design principles..

The thesis is based on a case study of a Swedish discussion forum where survivalism and prepping is the main focus. The awareness of an abrupt and immanent breakdown together with a full and thorough preparation for any conceivable threat posed by that breakdown is what legitimizes survivalism and prepping. This preparation, or risk-proofing is 1) grounded in an isolation of the body and its predispositions from perceived risks, and 2) actualized through artefacts, theoretical and practical knowledge and awareness. Stories of the embodied survivalist are also stories of masculine and heterosexual subjects and ?the others?.

This project practise methods used in the interaction design discipline to develop a concept related to the Swedish Guinness World Records Magazine. This project is a challenge to accommodate both the users? and client?s needs. We focus on interaction and the experience, which is acquired through the use itself, and how to connect it to a theme from a client. The aim of this project is to create a meeting place for children where they can interact with technology.

This report is the result of a thesis work in Integrated Product Development, regarding hygienic features in dishwashers and especially disinfection by the use of steam.The thesis is performed at Electrolux Primary Development Dishcare in Stockholm and in collaboration with the Department of Machine Design at the Royal Institute of Technology.The targets of the thesis are to prove the advantages of a technology suitable to implement as a hygienic feature inside a dishwasher and to realize a functional prototype of a differentiated hygienic feature that does not exist on the market today.The process followed to perform the thesis is the process defined for Electrolux Primary Development.The technology chosen for development is disinfection by heating the water on the surface of the dishware, by the use of steam.A number of tests on how steam behaves when injected into the dishwasher tub have been performed, providing the results that have been taken in consideration when designing the prototype.The prototype consists of a pipe system provided with nozzles to eject the steam into the upper parts of the dishwasher. Tests of the final prototype show that thermal disinfection of water in a dedicated area of the tub can be reached within 9 minutes. The operation requires 0,17 liters of water and consumes 0.2kWh..

This reportcommunicates the processes and results of my degree work in industrial design at candidate level at Umeå Institute of Design.During my degree work I had a cooperation with Svenska Jägareförbundet (Swedish Hunters Assosiation).The aim for my project has been to explore how I could make hunting a safer hobby and undertaking. Every year people get seriously injured and in average 2 people a year dies  due to hunting accidents. My goal is to identify problems within the hunters communication and approach. Through a creative design process I will find a valid  nd realistic solution to these problems. My project will be presented as a conceptual solution  hat will be based on currently existing technology.

The final stage of a designers work is always a bit tricky. Design is an abstract phenomenon and no one can tell when a design is really finished. The design process that designers work within has been thoroughly studied but cannot be truly mapped with strict constraints which the designer can follow to succeed. Therefore, in this paper we take a look at the final stage in the design process. The main goal is to get more knowledge and highlight key factors about what designers face when they are about finish their design or what forces them to leave a project that can stay in development for eternity.

We are in an emerging digital society where we are increasingly dependent on the mastery of IT and digital technologies to better carry out our everyday tasks. They cover everything from keeping in touch with family and friends to pay bills and declare. At the same time there are those who have not learned how to use the new technology and live their lives outside of the digital society. What happens to these people, in a society that is becoming increasingly digitized? Do they take harm by being in digital exclusion? It looks like this are issues that will not become less important as digital technology constantly changes.