The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

A geographical position and its social, cultural and political context as well as climate and specific physical characteristics define the scope for a landscape design project. This has become clearer for us in our master project where we have made a Design Program for the outdoor environment of Wollo University in Dessie, Ethiopia and analysed and reflected on the work and process. The aim for the project has been to design an attractive and functional outdoor environment for the Campus, based on the inventories and the needs and wishes of clients and users. But, the aim has also been for us as landscape architect students to gain a greater knowledge about landscape architecture and the design process by position ourselves outside our usual context. The method has been open and seeking where the site, literature studies, dialogues with people and our own experiences from the field study in Ethiopia has influenced the work. Wollo University is situated 400 kilometers north of Addis Ababa, in a mountainous landscape. It faces problems of heavy rainfall during the summer, soil erosion, a lack of essential facilities, and is still a construction site with empty spaces in-between buildings and infrastructure.

Webbaserat Tidrapporteringsystem.

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

Användning av mjukvaruverktyg när reverse engineering utförs är ett måste för att få ett användbart resultat enligt Hainaut (2002). Kudrass m fl (1997) visar på brister som kan uppstå när mjukvaruverktyg används. Gemensamt för de forskare som har studerats i detta arbete är att de hävdar att företag saknar kunskap för att utföra reverse engineering med mjukvaruverktyg. Har forskarna rätt i att det saknas kunskap eller har företagen mer kunskap än vad forskarna tror? Då dessa forskare har en klar koppling till tillverkning av mjukvaruverktyg så är eventuellt inte deras påstående opartiska och därför är det intressant att se om deras påstående stämmer med verkligheten.

Dagens föränderliga affärsklimat ställer höga krav på oirganisationer som vill jobba med innovation (Slavicek, 2011 & Drucker, 1995). Innovation handlar om processen för att samla in, utveckla, förenkla samt kommersialisera en idé (Mclean, 2005). Kreativitet och innovation kommer endast att ske sporadiskt om det inte finns en stödjande organisationskultur och tydliga processer för det (Malaviya & Subhash, 2005). Ett idéhanteringssystem hjälper organisationen att använda mänskliga resurser mer effektivt genom att se till att individer från hela organisationen kan bidra till innovationsarbetet (Lamont, 2004). Volvo CE är ett globalt ledande företag inom tillverkningsindustrin och verksamt inom maskiner till byggindustrin. På grund av den hårdnande globala konkurrensen har företaget under de senare åren jobbat mer fokuserat med innovationsarbete.

In this paper I argue that the development of innovation ideas within the financial system of scientific research might have a counterpart within the financial system of the social sciences and the arts. The ideas of innovation share a common way to evaluate science in terms of how well it can contribute to economic growth. In the past two decades a similar development can be observed within Riksbankens Jubileumsfond (RJ), one of the largest external financiers of the social sciences and the arts in Sweden. The idea of evaluating research used by the innovation ideas has grown popular within RJ, only it seems they evaluate research in terms of how well it fits into an international research community rather than how much it can contribute to economic growth as is the case within the innovation ideas. By examining the different ways of financing research that RJ has used during the last 2 decades, this paper aims to introduce a new perspective in which it is possible to understand the development within this type research funding as a part of a bigger system of development..

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

To complete an overweight treatment program is associated with better weight loss. Previous studies have in principle focused on drop-out from the entire program, not individual parts of a program. Factors previously shown to influence the patients´ weight loss results are: frequency of individual meetings with a professional, the lack of social support from family or friends, the lack of motivation and in a few studies vacations. In several studies the drop-out patients have stated that their reasons for drop-out were dissatisfaction with the staff and the program design. Drop-out has also been shown to be connected with difficulties in adherence to the diet.

To complete an overweight treatment program is associated with better weight loss. Previous studies have in principle focused on drop-out from the entire program, not individual parts of a program. Factors previously shown to influence the patients´ weight loss results are: frequency of individual meetings with a professional, the lack of social support from family or friends, the lack of motivation and in a few studies vacations. In several studies the drop-out patients have stated that their reasons for drop-out were dissatisfaction with the staff and the program design. Drop-out has also been shown to be connected with difficulties in adherence to the diet.

This thesis is a case study with a qualitative approach. The company examined is The Astonishing Tribe (TAT) making user interfaces for mobile phones. The company has had a growth of 1453% from 2002 until 2006. We have examined what are the key factors for keeping innovation while growing. The most significant factor not supporting innovation within the case company is the will to take calculated risks.

In this report statistics concerning the reliability of sprinkler systems from seven countries has been analysed. The objective of the report has been to determine the reliability of sprinkler systems in Sweden and to present suggestions on measures to increase the reliability. The main conclusion that has been drawn is that the reliability of sprinkler systems in Sweden is 92 percent according to the analysis of Swedish statistics, and that this figure finds support in statistics from other countries. Further results are that the quality of design, installation, maintenance and inspection of sprinkler has to be improved and that the Swedish incident report has to be revised..

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.