This report is the result of a project work carried out at Karlstad University in conjunctionwith the local consulting firm Camatec where most of the work has been performed.The work can be classified as a classic engineering work with supportive theories andcalculations which in this context is relevant.The engineering project has focused on developing new standards for a conveyor that is usedin the Värmland paper industry where large rolls of paper are produced. A conveyor can takeits appearance in many different forms but in this thesis it has been an exemplary look and ithas also become modulatable with a central section, a drive end and a turning end.The construction work has been build under CAD programs such as Pro Engineer, drawingshave been created and costings have been analyzed. Strength calculations have been made andcooperation from several different companies have erected to explore different solutions andideas for a modern and sustainable conveyor..

This thesis describes a conceptual design of a support frame for a synchronousgenerator used in a vertical axis wind power plant. In this system the generator isplaced on ground level. The thesis also considers the design of housing for thesupport frame and generator. The concept presented in this report is based on anearlier design. Besides geometric design, simplified simulations has been run in orderto optimize some of the parts included in the construction considering naturalfrequencies and structural strength.The result is presented as CAD-models andan assembly drawing..

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

Between 1965 and 1975 a major housing project was carried out in Sweden to resolve a major housing crisis, the so-called one million housing program (Swedish: miljonprogrammet). To raise the standards and create a more attractive housing in these areas is currently a very relevant topic in Sweden.Evidence-based design is the process of basing decisions of the built environment on credible research and studies to achieve the best possible outcome. This method is primarily used in the healthcare sector to improve quality of care and reduce costs by creating healthy environments.The possibility of refurbish apartment buildings from miljonprogrammet using evidence-based design has been studied by means of an extensive literature review and a closer examination of the residential area, Husby in Stockholm, which has been chosen to represent the miljonprogrammet in its entirety. Furthermore, the evidence-based research has been limited to seven fields; nature, noise, color, wayfinding, safe environment, daylight and thermal comfort which has been assessed to be applicable on housing. In order to obtain a comprehensive overview of the different fields, four different subjects were chosen to investigate further within each field; research and studies, laws and regulations, constructional aspect and Husby.

Handbok.

The purpose of this thesis has been to build a parameterized model of a prototype motor in the program Solidworks, to use in future optimization of aspects of effectiveness and weight. The result were two models. The first model were one minor part of the whole design in 2D, to be able to optimize and study the minor part with a faster loss simulation. The second model was the whole design in 3D. The whole model were done with the three programs Solidworks, Comsol and Matlab.

The primary intention of this paper was to visually compare film trailers without considering semantic information, through use of a self-developed Matlab program, resembling that of human perception. Circa 150 people participated in an online survey where they were shown two film trailers and asked to rate their visual similarities. The result from the program was weighted against the survey results in such a way that the weights corresponded to a 75% accuracy between the program?s and the participant?s (for participants with prior experience in the field of photography and/or film) comparisons.How accurate can we compare still images from film trailers, and find similar trailers for the human viewer, by analyzing saturation, color tone, contrast and lightness with a self-developed Matlab program..

ABSTRACTIn this study, five people were interviewed who are involved in a drug-assisted program for opiate addiction, also called substitution program. The meaning of substitution is that these clients' drug addiction is replaced with substitute preparations, either methadone or Subutex in an orderly manner. The clients of the researcher decided to study the substitution program have all been a heavy opiate addiction for years. Their participation in the replacement program is more than two years, and those who have been around the longest have been in the program for six years, so long as the substitution program has existed in Visby.This is a qualitative study in which interviews are conducted face to face with each individual client, and the interview was unstructured in the sense that no specific issues made in advance. The interviews have been themed, and the researcher has gone through various areas of life around the respondent.

Detta arbete har utförts på avdelningen för datorstödd maskinkonstruktion vid Luleå tekniska universitet. Uppgiften var att undersöka hur omvärldens utbildningar inom produktdesign, innovation och entreprenörskap ser ut och kommer att förändras i framtiden. Detta med utgångspunkt i det arbete som för närvarande pågår inom CDIO-ramverket (Conceive Design Implement and Operate) men även inom andra utbildningsinitiativ. Bakgrunden till arbetet är att det uppstått en klyfta mellan industrin och akademin. Nyutexaminerade ingenjörer besitter inte de kompetenser som näringslivet vill att de ska ha med sig i bagaget efter avlagd examen.

Gränsöverskridande samarbetsprojekt mellan akustiker och arkitekter/designers existerar idag på många håll men gapet mellan arbetsdisciplinerna är fortfarande alltför stort. Den största problematiken ligger i arbetsmetodiken hos de olika fälten där det finns ett stort behov av integration. Genom att utveckla gemensamma arbetsmetoder för dessa yrkesgrupper ökas chanserna till en bättre kommunikation och ett starkare samarbete över gränserna. Examensarbetet har använts till att framställa en enkät med syftet att fungera som ett interdisciplinärt verktyg för att få yrkesgrupperna att närma sig varandra. Enkäten är skapad inom ramen för forskningsprojektet NICe (Nordic Innovation Center) ? Sound Design of Open-Plan Offices ? ett projekt drivet av ledande akustikföretag i Norden med målet att skapa kvalitativa mätmetoder för att bedöma ljudkvaliteten i storrumskontor.

Bakgrund: I och med den tilltagande teknologiska utvecklingen och globaliseringen ställs dagens företag ständigt inför nya utmaningar. För att handskas med detta måste företag arbeta för att skapa innovationer på ett sätt som de inte gjort tidigare. Det handlar om att släppa sargen ochvåga göra saker påett nytt sätt! Ett sätt för dematt göra detta är att tillämpa synsättet som kallas ?Open Innovation?, alltså att man tar hjälp av intressenter utanför företaget för att bli mer innovativa. Crowdsourcing är en del av open innovation ochinnebär bland annat attföretagtar hjälp av ?folkmassan?för att skapa nya idéereller lösa problem.

The euthropthication of the Baltic Sea is a threat that is beginning to be taken seriously by the governments concerned. In Sweden, regulations concerning the allowed nitrogen (N) concentration in the effluent water from wastewater treatment plants are being tightened up. The Rimbo wastewater treatment plant has been imposed to reduce the annual mean concentration of total N in the effluent water to levels below 15 mg l-1. A more and more common way to reduce the nitrogen level in wastewater is to let the water pass through a wetland. This study investigates the possibility to build this kind of wetland at the outlet of the Rimbo wastewater treatment plant.A prestudy of the topography, soil characteristics and groundwater flow indicates that the land area in question is well suited for the construction of a wetland.

I den här studien utvärderar jag effekter av ett förbättringsprogram i form av nya kunskaper varefter jag studerar hur och under vilka villkor dessa kunskaper används och sprids. Studieobjektet är ett servicehus som ger service till äldre med och utan demenssjukdom. Denna verksamhet har vid två tillfällen deltagit i förbättringsprogram anordnade av Region Skåne. I bägge programmen har man, som förbättringsverktyg använt sig utav Genombrottsmetodiken och båda dessa program ligger i fokus för studien. I denna kvalitativa studie har jag använt mig utav intervjuer som metod för datainsamling medan den teoretiska basen har utgjorts av teorin om innovationsspridning.

The aim of this study was to describe, analyze and compare the Left Party?s, the Social Democratic Party?s, the Liberal People?s Party?s and the Moderate Party?s ideas on immigration policy from 1960-2010. In this study the immigration policy program or party program was analyzed through idea analysis to find out what immigration policy interventions they have come with, and if they want to assimilate or integrate immigrants. Materials used for the study are the immigration policy programs and party programs. Even scientific journals and articles have been used, in both national and international level.

Stora Enso Skog has a long term contract regarding felling rights and silvicultural activities on forest owned by Bergvik Skog. In the autumn 2006, Bergvik Skog proposed a new thinning program, ?Bergvikgallring?. The new program implied an increased focus on extraction of smaller trees compared to the present thinning program, Stora Enso Skog?s ?Kvalitetsgallring?.