Purpose: The purpose of this study is to investigate the innovation process of companies, and to analyse how important success factors and obstacles are in their innovation process.Method: The investigation strategy used for this essay was to interview companies that work with innovations. The essay has a qualitative approach. Both primary ? in the form of interviews - and secondary data ? literature found in books, scientific articles and internet - have been used to achieve our results.Results: The result of this essay is: there is not just one inovation process that is applicable to all companies. On the other hand, there are some guidelines that could be followed in the process.

Sveriges regering har under de senaste åren uppmärksammat och främjat dagens och morgondagens entreprenörer i deras innovativa arbete för att skapa en framtida tillväxt. Dessa tankar är inget nytt utan har existerat i den ekonomiska forskningen under en längre tid.  Joseph Schumpeter var nationalekonomen som tidigt såg kopplingen mellan entreprenören dess innovationer och tillväxt. Han identifierade innovationen som en skapare av tillväxt då den hade förmågan att bryta ned ineffektiva monopol- och oligopolstrukturer och ersätta dessa med en mer fri och effektiv marknadssituation. Innovationer uppstår ofta ur en process och att förklara denna kan vara problematiskt. För att beskriva denna process används ofta modeller framtagna ur studier av företag som arbetar med att frambringa nya innovationer.I en innovationsprocess finns det ett antal intressanta aspekter att titta på.

This diploma work was conducted in collaboration with the Swedish civil engineeringconstruction company Skanska Construction in Stockholm. Their interest is todevelop a number of type approved form constructions which can be used during theconstruction of concrete walls. Skanska focuses on improving safety on their projectsand both supervisors and workers have a need for approved form constructions inthe current situation.The study is focused on safety and the purpose is to facilitate the preparation beforethe form work can begin. By studying the literature of the subject and conductinterviews with employees at Skanska Construction, the understanding of the issueand knowledge will be increased.Literature studies, interviews together with production and design have been thebasis for a successful study. The work has resulted in three types of approved formconstructions to Skanska Construction and the drawings can be used of employees atthe company.

This report is a part of the process of enhanced cooperation between fire rescue services in the region of North West Scania. The aim of the report is to study and analyze how the fire rescue service should be structured, in terms of rescue units and personnel, if no account is to be taking to the current organization. Two types of accident are considered in the report, traffic accidents and building fires. These are more affected by decreased response time than other accidents. Several suggested organizations are presented and they are evaluated with the computer program REP.

Det kunskapssamhälle som råder idag medför att organisationer måste rusta sig och hålla ett högt tempo i den förändringsbenägna omvärlden. Kunskap och lärande ses däremellan som nyckelaktiviteter i relation till förändring vilket i sin tur föder innovation. Forskning har påvisat att småföretag förväntas bidra till en större del av näringslivets tillväxt, men att småföretagen samtidigt har behov av att höja sin innovationskapacitet för att möta utmaningen. Studien avsåg därför att utforska småföretag i extern samverkan för att se huruvida ett sådant kunskapsutbyte skapat förutsättningar för innovation hos den egna organisationen. Med hjälp av en kvalitativ forskningsmetodik undersöktes sex småföretagsledare som deltagit i det lärande nätverket, Tillväxtmotorn, via semistrukturerade intervjuer.

This thesis primarily includes a study on whether companies can develop a mathematical activity that supports students' motivation in mathematics. The work was done together with Midroc Electro, a company that pays attention to the difficulty of recruiting and therefore was interested in investigating how the business world would be able to contribute.The thesis can be divided into three stages. The first part comprised by a exploration into research on student motivation regarding mathematics as well as numerous interviews with engineers to see how the research findings did fit with Midroc Electros reality. In these studies it became clear that the student who aims for a profession whose education or work requires math belongs to the group of students who primarily manage their studies in mathematics, that is, those that have the greatest motivation to work hard and complete their studies.Research information and interviews were compared and resulted in the thesis second part, Midroc Challenge. An activity where students primarily came to learn about the engineering profession and secondly how mathematics can be used in the engineering profession.

The degree project has been implemented abroad in Brisbane, Australia. A literature study has beenperformed parallel to the practical work within the subject »Corporate identity through graphicaldesign«. In this study deeper research has been made concerning the establishment and manifestationof a corporate identity and its program. The knowledge given from this study has been put into practicethrough two larger projects.The first project was carried out at De Pasquale, advertising agency in Brisbane, where a corporateidentity program was designed for a new company. The company is a fitness centre, called KnockoutFitness, which specializes in different types of boxing training sessions such as Boxing, Thai Bow andBoxercise but also Aqua aerobics.

The purpose of this work is to find out if the suctionvalve to the salivaejector for dental equipment in a simple way can be improved or if a new design is needed. The result of the examination of the suctionvalve shows that the friction between the piston and the seal is high and that this causes the valve in a few cases sheaves. The study concluded that only small changes in material or detail, improve the component..

The task to this thesis has been to create an application, Katana-databas 1.0, for analysing c-code. The generated output gets stored in a data structure which content in the end of the program run gets written in a textfile which gets used by Katana. It's a tool for reverse engineering, developed by Johan Kraft at Mälardalens institute.Katana-databas has got the following limitations. (1) It can only handle preprocessed files, meaning it doesn't contain any rows beginning with "#". (2) Only complete files can be handled.

This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.

The purpose of this thesis is to study and determine how working in cross functional teams can generate value in an effort to facilitate innovation. An inductive scientific perspective is chosen as the research approach. A single case is investigated with the theoretical framework based on Resource Based View, Intellectual Capital, Innovation theory and theories concerning Cross Functional Teams. The empirical material has been collected through primary data; surveys, interviews and secondary data; literature, websites and further complementary data. The practice of using Cross Functional Teams will enhance organizational learning, knowledge transfer, increase communication and innovation, which in turn will increase the speed and performance of the new product development process.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

The initiative for this project was taken by Benteler Engineering Services, as a result of having identified areas of improvement, in designated accessible areas like the wheelchair spot onboard buses. Depending on a wheelchair to be able to move around can understandably be challenging.Public transport is a common good in today`s society, however despite the measures taken towards adjusting to accessible needs, the majority of those being disabled chose different alternatives of transportation. This is due to reasons such as the drivers' poor attitude, furthermore the limitations of the space allocated to accessible needs, as people with strollers also use these spots onboard. Also, some wheelchair users find the rides unsafe, as they could easily fall over during without the appropriate space for them onboard the buses etc. These are only a few reasons why other options are sought out, i.e.

Purpose: This study`s purpose is to investigate the role of a business incubator in the strategic decision situations during the process of a new venture startup. It also aims to explore the methods and instruments the incubator and its advisers applies during the process.Methodology: This study is built on the basis of a hermeneutic approach with qualitative method and abductive design. The empirical material collected consist of interviews from two case studies and secondary data collection from different related sources.Theoretical perspective: The theory in the study consists of the elements of previous research on innovation processes and entrepreneurship. To analyze the data, models and theories related to decision making, incubation, process theories and organizational theories.Empirical foundation: The empirical material consists of interviews and data from two completed case studies. Additionally consist a relatively large part of the empirical data out of a comprehensive information retrieval from various secondary sources such as internet, newsletters and annual reports.Conclusion: The assay was able to detect not just one, but a variety of roles that the incubator occupies at different stages of the innovation process.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.