The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

This bachelor thesis aims at investigate how a specified house can optimize its energy consumption.Today the house often stands for the major part of the energy consumption in a consumers? life,whereas an energy optimization creates economic as well as environmental advantages. It is importantto make old houses more energy efficient, but putting high energy demands on new houses could beargued to be more important. The installations functions as both the heart and brain in a house, thusmaking it important to energy optimize these. Since the background describes the importance ofenergy efficiency and optimization in a house, the focus area of this report will be an investigation ofdifferent types of heating systems in order to be able to choose the one most suited for the house.Aspects considered when choosing the heating system was how economic the system is both inservice- and investment costs and how environmental and operational friendly the system is.Through literature reviews there were sufficient information gathered that served as a foundation whencomparing and choosing between the four systems - district heating, pellet-fired boiler, geothermalheating and solar heating.

Most often when developing a new system there is a need get a functioning testtool up and running. Including time, cost and resources the solution isn?t always obvious, developing your own or buy one ?of the shelf?. The purpose of this thesis is to study how a general testtool for executing functional tests should be designed to be reusable, be based on recognized knowledge and be able to fast and simple be customized for different types of systems. Key functions from the litterature is presented and used in the design of a testtool prototype.

The guest harbor on Utö, Utö Gästhamn, is currently using electricity for heating all of the water used in the showers and taps. Because of the large amount of visitors, especially during the summer months, the hot water usage gets very high and that is also the case for the electrical bills. During the year of 2011 the cost of electricity for Utö Gästhamn reached a total of 257 500 kr. Out of these 257 500 kr approximately 142 000 kr, 55 % of the total cost, were because of the water heating.The report is the result of a cooperation with Skärgårdsstiftelsen, the Green Islands-project and Utö Gästhamn where the mutual goal is to dimension a solar energy system, to promote the sustainable development.Initially the different techniques for the solar energy system are researched. The techniques are plane solar collectors, evacuated tube collectors, pool collectors and photovoltaic cells.

The purpose of this project is to get a fully functional, automatic steering system and a variable breaking system with an emergency breaking function to an off road vehicle. This off road vehicle is supposed to work as an aid in military situations. A team of two, Sebastian Attervall and Nichlas Gustafsson, got an order from Jonas Nyårds and the PreeRunners Project to construct a steering system that could manoeuvre an off road vehicle without any human involvement. To make this possible the vehicle would be guided by onboard sensors, cameras and computers. The team where also assigned to construct an automatic breaking system, there also no human would be involved.

Det finns huvudsakligen tre olika sätt att konstruera ett partitionerat system på: Federerad arkitektur, Integrerad Modulär Avionik (IMA) med ARINC 653 eller IMA med virtualisering. I den här rapporten undersöks de olika arkitekturernas egenskaper och vilka möjligheter som finns för certifiering av dem. Efter den teoretiska undersökningen har Virtualisering, och framförallt Xen, valts ut för en testimplementation och tillförlitlighetstester.Testimplementationen består av fyra partitioner där varje partition har sin specifika uppgift att lösa. Den fjärde partitionen används för att undersöka hur Xen hanterar en partition som aggressivt nyttjar I/O, processor eller arbetsminne.Testerna visar att Xen har en svag punkt: all I/O hanteras via en egen, speciell, partition. Denna partition saknar dessutom möjligheter att prioritera I/O från specifika partitioner.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Syftet med uppsatsen var att undersöka vad som gör att en användare vill använda SMS i en organisation och vilka faktorer som påverkar användandet av detta system, det vill säga acceptansen av att använda det. Då denna typ av system är relativt nya tyckte vi att detta var ett intressant ämne att undersöka, samtidigt som vi ville se vilka faktorer som påverkar användaren i avseende till användning av ett specifikt SMS-baserat system. Det kan även vara intressant för företag som vill implementera eller utveckla den här typen av system. Utifrån syftet bestämde vi oss för ett visst tillvägagångssätt som vi skulle använda oss av för att kunna få svar på våra frågor. Tillvägagångssättet var att leta i den litteratur vi haft på tidigare kurser inom det systemvetenskapliga programmet för att hitta en teori som kunde ge oss stöd för ett resonemang.

This master thesis describes the development of an UPS module. UPS is an acronym for Uninterruptable Power Supply. The UPS module has been developed at the company AerotechTelub AB. The UPS module delivers the necessary voltage and current in case of a power interrupt. If a power interrupt occur, the computer system has one to three minutes available to store data and shut down correctly.

Vad är det som gör att införandet av ett nytt IT-system i en organisation upplevs som framgångsrikt eller inte? För att söka svar på frågan studerades införande av ett nytt IT-system vid en svensk myndighet. Ramen för studien utgörs därmed av den offentliga sektorn och e-förvaltningskontexten. Genom att återge och analysera systemägares och användares berättelser om införandet och användandet gavs möjlighet att jämföra berättelserna med myndighetens intentioner med IT-systemet utgående från olika beslut och planer. Syftet med studien var att i den jämförelsen kunna fånga upp och bidra med kunskap om gap mellan olika perspektiv/berättelser vid införande av IT-system och utgående från det kunna visa på olika aspekter som kan bidra till förståelse av och förklaringar till upplevelser och resultatet av införande av nya IT-system i offentlig verksamhet. Studiens teoretiska ramverk baserade sig på idén om att IT konstrueras socialt och att man vid studier om informationssystem och organisationer behöver beakta både tekniska och sociala system/institutionell kontext.

Objective ? To study the requirement of nursing care of the equine patient during eye treatment with a lavage system together with a constant rate infusion pump. Procedures ? Three veterinary nurses at ATG: s Hästsjukhus in Skara were asked nine questions at individual interviews. Inclusion criteria for participation in the interview were that the nurse should have treated equines with and without the infusion pump to the lavage system, but also traditionally with eye drops. Results ? The equine had a higher well-being since it experienced less stress during eye treatment with the infusion pump compared to treatment given by hand through the lavage system. The treatment would be more effective with constant rate infusion and save costs for the owner.

The purpose of this Master Thesis is to analyze what suitable hardware platforms there are on the market in order to build a low price control and Information system for mobile applications, called small display module. The thesis will be underlying material for making a decision for further development. The result of the thesis consists mainly of a Windows CE kernel and a schematic for a CPU card, on which it would be suitable to build the display module. Another major part of the report is the introduction of different techniques that could be of interest when designing a processor based system. The processor architecture that was chosen is the x86.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Incentive programs are one of the most important strategies that a corporation has in order to achieve its major policies and goals. The purpose of this paper is to identify these goals and their function, so that we later can analyze the incentive system?s effectiveness. The paper?s focus is on Max Hamburgarerestauranger AB?s incentive system, that is directed to the managers of all of its restaurants.We had interviews with the CEO, as well as the head of the Economics Department of Max H.