This thesis lays the foundation of the future routines of effective error repotring fortraffic devices in the raiway sector.If a device, for example a timetable display, stops working it is vital that the device isfixed as fast as possible so that the travelers dont miss any important information.The methods that are used today are old and not very effective. It can take time forthe repairmen to find the right device or locating the broken component. At the sametime he is supposed to maintain telephone contact with central control throughoutthe whole session.The need for a new, more effective, system is vital to make the whole repair pfocessmore effective and let the repairmen work without having to contact the centralcontrol by phone.I started this work by examining the possibilities of assigning every object with aunique identifier (ID tag) that could be accessed by a manual scan device. The ideawas that the ID tag could holw information about the object and be obtained byscanning the ID and get the information presented on a mobile device.The work also included building a internet application that enabled the reader to seeand change the information on the ID tag.The result was a database that stored information of different objects which could beobtained by scanning the ID tag and presented by a internet application..

The aim of this report is to discuss computer security in handheld computers and to find out the appropriate security level that must be implemented to be able to use handheld computers within the Swedish healthcare system. Most healthcare centers are using some kind of electronic journals for their patient´s data today, but there are still a number of clinics that are usingthe old paper-system. On a few places in Sweden the use of handheld computers at the clinics has already started, but in the United States the use of handheld computers in the medical area is already widespread and from this we can see a lot of different situations where it is useful and effective to work with handheld computers. The security demands on patient´s journals are high and regulated in both Swedish law and regulations from the National Swedish Board of Health and Welfare. The law does not have any substantial demands, but states that there should be an adequate security level based on the nature of the information and the costs.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

In order to produce grain in an economically rational manner numerous decisions have to be made. One of these decisions is what tillage system to use. The cost of the tillage system is a large part of the total cost in grain production. Different tillage systems result in different distribution of fixed costs, operating costs and timeliness costs. The price of the produced grain and cost of inputs also affect the best way to produce grain.

Diagnosis means detection and isolation of faults. A model based diagnosis system is built on a mathematical model of the system. The difficulty when constructing the diagnosis system depends om how the model is formulated. In this report, a method is described that rewrites the model on such a form that the construction of the diagnosis algoritm is easy. The model is transformed by two state space transformations and the result will be a system on state space form where one part of the system becomes easy to supervise.

The purpose of this Masters thesis is to compare classification codes and feature headings of three different universal classification schemes SAB, UDC and DDC, when classifying archaeological literature. The aim is to determine whether a subject analysis of a title generates similar feature headings in the three systems, and to find positive and negative things about each system from an archaeological point of view. The comparison and the analysis of the 22 chosen archaeological monographs showed that the subject analysis of the titles didnt always generate similar feature headings. This could depend on several things, for example different interpretations of the subject analysis of a document, less knowledge about the system and/or the subject, or the fact that its not the same classifier that creates the codes. The study also showed that the different classification systems did treat the subject archaeology a bit differently, and that its difficult to say that one of them is better for classifying archaeological literature.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

???Information Technology is an essential part of the society today, not least in large ???organisations dealing with sensitive information. An example of such an organisation is the Swedish Armed Forces which indeed is in the need of ways to ensure information security in their Information Technology systems. The means which is used is an authorisation and accreditation process.All Information Technology systems go through a life cycle which includes realisation, usage, development and liquidation. In the Swedish Armed Forces the lifecycle is an authorisation process.

Syftet med detta examensarbete var att undersöka vilka faktorer som påverkat acceptansen hos användare, inom den kommunala verksamheten, vid införande av ett datoriserat system. Med acceptans menas att användarna ska kunna utföra sina arbetsuppgifter på ett bra och lätt sätt. Studien har gjorts utifrån användarnas perspektiv.Genom att genomföra en intervjuundersökning på ett flertal kommuner där användarna använder systemet Vabas/Duf, har undersökts hur användarnas upplevda acceptans påverkas av faktorerna delaktighet, användbarhet och lättanvändhet, vid införande av ett datoriserat system. Delaktigheten vid införandet av ett system innefattar även information och utbildning.Resultatet från undersökningen visade att delaktigheten ökade användarnas acceptans. Ingen avgörande slutsats kunde däremot dras mellan acceptans och faktorerna användbarhet och lättanvändhet, då resultatet från de båda grupperna inte visade någon märkbar skillnad..

The purpose of this thesis work was to develop an automatic fault detection system for surveillance of bearing temperature in hydropower turbines. The parameters used except the bearing temperature were cooling water temperature and cooling water flow. A simple static model based on data sampled every minute was developed to estimate the bearing temperature. Then a detector for detection of change in bearing temperature based on the CUSUM-algorithm was designed. Since the amount of data was very small the developed model was too uncertain to be used in a working system.The designed fault detection system showed to work well for the available data.

Examensarbetet har utförts på Scanias avdelning för forskning och utveckling i Södertälje, mellan september 2010 och februari 2011. Syftet med projektet var att studera hanteringen av indata kring två mjukvaruprogram som Scania erbjuder för att simulera prestanda och vissa fysiska egenskaper hos lastbilar och bussar. Projektet har haft tre övergripande delar:Kartläggning av informationsflöden och orientering i arbetssätt, system, med meraRiskanalys och utvärdering av befintliga processer för indatahanteringUtveckling av förbättringsförslag och rekommendationerArbetet inleddes med en litteraturstudie där ämnen relevanta för projektet, så som informationshantering och produktutveckling, studerades. Parallellt med detta utfördes ett antal intervjuer med personal på Scania som alla var involverade i hanteringen av den aktuella informationen. Resultatet av intervjuerna sammanfattades i flödesscheman, där informationskällor och -flöden illustrerades.

This degree project deals with the creation of a business system for Gamersneed Sweden. The system is divided into two parts, one windows appliction and one websolution..

Syftet med detta examensarbete var att undersöka vilka faktorer som påverkat acceptansen hos användare, inom den kommunala verksamheten, vid införande av ett datoriserat system. Med acceptans menas att användarna ska kunna utföra sina arbetsuppgifter på ett bra och lätt sätt. Studien har gjorts utifrån användarnas perspektiv.Genom att genomföra en intervjuundersökning på ett flertal kommuner där användarna använder systemet Vabas/Duf, har undersökts hur användarnas upplevda acceptans påverkas av faktorerna delaktighet, användbarhet och lättanvändhet, vid införande av ett datoriserat system. Delaktigheten vid införandet av ett system innefattar även information och utbildning.Resultatet från undersökningen visade att delaktigheten ökade användarnas acceptans. Ingen avgörande slutsats kunde däremot dras mellan acceptans och faktorerna användbarhet och lättanvändhet, då resultatet från de båda grupperna inte visade någon märkbar skillnad..

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.