This thesis tries to clarify why more houses such as passive houses is not built and at the same time the differences is described with the conventional construction as a starting point. Sweden has set environmental objectives to reduce energy consumption in buildings by 50 percent by the year 2050 compared to 1995. The passivehouse concept could have a significant role, particularly in the reconstruction of buildings with high energy consumption. For sustainable building the passivehouse technology is an economically viable concept while benefiting the environment. Initially an introduction is given of the background to the problem, purpose and objective of the thesis.

This Master Thesis covers the concept of Green Cars. The background to the research area is the high and rapidly growing number of cars, which together with other factors ad to the pollution of the environment. Under the Kyoto agreement the signing members agreed to lower the emissions of green house gases, further on the EU has a 3-pillar strategy on carbon dioxide and cars. Included in the EU strategy is a voluntary commitment from the car industry to reduce carbon dioxide emissions from new cars. The easiest way of lowering the emissions is by using alternative fuels and engines.

Information technology has become an integral part of our everyday lives. The Web is an important part of this development, however, web pages can be inaccessible to many groups of users. The purpose of this thesis is to examine the accessibility of Swedish public library websites. Besides examining the general accessibility, this study also covers whether any specific aspect of accessibility is particularly poor and if so which groups may be affected. In addition, this study also examines whether a correlation can be found between the degree of accessibility and the size of the website.

This report is a result of a degree thesis at Luleå University of Technology together with Stram AB in Växjö. The project aimed to develop a size reducible bed, that gets small when folded and has a new slim design. The development of the new folding bed had the purpose to give Stram AB new ideas of how guest beds can look like and be used in the future. Information about Stram´s products and also information of other similar products on the market was gathered. A visit at a store, internet and interviews gave grater insight of the market, and of customer needs.

This report is the result of a project in the course Independent Projekt in Molecular Biotechnology at Uppsala University during the spring of 2014. The foremost purpose of the course is to give students the opportunity to carry through exstensive work in a project environment. This project was formed based on a comission from the biotechnology company SweTree Technologies, and the goal has been to compose a summary of the different techniques and methods that exist in the field of mass propagation of trees through the method of somatic embryogenesis.The project group has obtained information about the area mainly throgh reading patents, trying to find key components and bottlenecks in other companies? somatic embryogenesis technologies. This paper is divided into different sections, containing the patents of the automation of different steps in the process.

The last two decades have changed the society from the Industrial Age to the Information Age. The technological development, especially in IT, has caused a ?Revolution in Military Affairs?. However; how big are the changes RMA will give, or will it even change the foundation of the Art of War and if so, in what way?RMA has three cornerstones DBA, DS and PE all closely integrated in an NCW-concept.

Syftet med denna studie är att få en inblick i hur lärare på mellanstadiet arbetar med teknikämnet i skolan. Detta görs genom en enkät, vars frågor är upplagda efter tre frågeställningar: Vilka tankar har lärarna om teknik? Hur ser pedagogernas teknikundervisning ut? Vilket undervisningsmaterial använder lärarna sig av i teknikämnet? Totalt är det 65 lärare som arbetar eller har arbetat med teknik på mellanstadiet som deltagit i studien. Enkäten har visat på att de flesta lärarna som deltagit tycker att teknikämnet är ett roligt, spännande och intressant ämne som dock är svår bedömt, tids- och materialkrävande. Undersökningen visar även att de flesta lärarna tycker det är bäst att arbeta med teori och praktik varvat, då båda delarna behövs för att eleverna skall förstå teknikens innebörd i samhället.

Today wireless transmission of data is becoming more and more popular and the need for faster transmission rates is increasing. Since the bandwidth is limited it is important to try to use it to the fullest. CDMA is a technology that allows multiple accesses on the same frequency and time thus making it very bandwidth efficient. The CDMA technology was first introduced in the second generation?s cellular systems but has since then been improved and is reused in today?s 3G systems as Wideband CDMA.

This master thesis work was done at Saab Underwater Systems AB, a company at the cutting edge of underwater technology. Here torpedoes and other underwater vehicles are developed and manufactured. The major customers are navies of different countries, mostly the Swedish navy. The aim of this master thesis is to develop, construct and evaluate an automatic Trim System for Unmanned Underwater Vehicles. The task of the system is to change the position of the centre of mass and the vehicle?s total mass or volume.

The aim of this study is to establish whether there are any specific trends in master theses concerning knowledge organization. To identify the past and current trends a method of content analysis has been applied to 110 theses over a time period of ten years. The results of this study show that there is an increasing interest in subjects concerning for example the evaluation of retrieval effectiveness in search engines on the Internet. A subject which was popular in the late 1990:s was Information Technology and its different applications. This subject has since that time decreased in popularity.

AbstractTitle: Wireless Fidelity ? A Scenario Analysis Authors: Mellberg Ola, Technology Management, Lund UniversityMårtensson Jens, Technology Management, Lund University Tutors: Andersson Jens A, Faculty of Engineering LTHKarlberg Johan, Sony Ericsson Mobile Communication ABSvensson Claes, Lund University Discussion: The most significant impacts on the telecom industry over the past decades have been the rapid growth of the Internet and mobile telephone services. Currently these two worlds are converging. Moreover, the fast expansion of wireless high capacity Internet access, increased distribution of local/public hotspots and rapid development of wireless network cards have opened new opportunities for the mobile telecom industry. Research Questions:To what extent could the explosion of local and public wireless networks, using WiFi technology, affect the future telecom industry? Who will ultimately master the WiFi innovation and to what degree could this innovation open new possibilities for external players to enter the mobile voice industry? Purpose: The purpose of the Master Thesis is to provide Sony Ericsson Mobile Communication AB with the most transformational scenarios, which will enable employees to recognise patterns and interpret the meaning of WiFi-related events as they unfold.

The Royal Library (KB) of Sweden harbours great collections of different objects through a special law from 1661. This master degree paper is exploring a part of KB?s digitisation of those collections. It deals with the questions about what the KB had chosen for digitisation, why those choices were maid and who is responsible for making these decisions. The paper will also for example seek out different patterns and trends in the information.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

In this Bachelor Thesis (20 p.), we present the history and development of "Intelligent Houses", and most important- explore some of the future possibilities in this area. The project has been carried out through an interdisciplinary cooperation between three different educations at the Blekinge Institute of Technology. By conducting a dialogue with various actors with different professions, we have been trying to identify needs within the concept of "Intelligent Houses", were the end user is not only the tenant or homeowner. Through Participatory Design methods, such as a Future Workshop, we have brought the users together to discuss their own and each others needs and hindrances in their respective work practice, and how intelligent house technology could improve their work conditions. We have also been testing a highly sophisticated CO/CO2/Moisture/Temperature/Enthalpy multi-sensor & controller, originally developed for regulating indoor climate systems. Based on the needs we have found in our fieldwork, we have been looking at possibilities to make multi user solutions with the sensor..