Kontorslandskap är en vanligt förekommande kontorsdesign och fördelar och nackdelar med att arbeta i sådan miljö är oklara. Syften med denna studie var att a) undersöka hur individer upplever att arbeta i kontorslandskap och vad det kan ha för konsekvenser för hälsa och arbetsvillkor, och b) undersöka deras grad av känslighet i förhållande till kontorslandskap, hälsa och arbetsvillkor. Studenter vid Beckmans designhögskola deltog i studien genom att fylla i en enkät. Resultaten visade att upplevelse av kontorslandskap var relaterat till anspänning av arbete och arbetstillfredsställelse men inte till sensory-processing sensitivitet vilket är delvis i linje med tidigare forskning. Att uppleva kontorslandskap som positivt kan kopplas till högre arbetstillfredsställelse och lägre anspänning av arbetet.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

We have different kinds of signal processing everywhere around us in our everyday life, in our cellphones, when we are listening to music, watching TV etc. This makes signal processing a very interesting and important technical area, where the demand of skilled engineers sets the limit of what is possible.Working with signal processing requires in-depth knowledge in areas such as mathematics, physics, electronics, and other related areas. For this, it has traditionally been demanded by a talented developer to also master the advanced programming languages such as C / C + + and Assembler.This has begun to change; today there are several companies that offer graphical development environments for signal processing, environments where programming skills are not needed anymore, and the focus can be on signal processing instead.The goal with this project is to build a corresponding graphical development environment to reach an understanding of what is required of these systems, and also to grasp what opportunities that are available within graphic programming. Inspiration for the work has partly arise from some of the tools available on the market, and partly from previous theses that have been written about graphic programming.The challenge lies in creating a program that can execute signal diagrams in real time from given signal blocks, and be able to handle feedback loops in an efficient way and to do so at the lowest "cost" in terms of clock cycles as possible. This should also be compared against to code, compile and run a complete signal diagram directly.To increase the usability it should also be possibility to externally manage in real time the parameters of the signal diagram during execution.The interface is a separate program, which is to some extent similar to Matlab Simulink, where a signal diagram is drawn up graphically by connecting wires between different signal blocks.

There is an increased pressure for firms to provide the financial market with additional information. Such disclosure is attached with different kinds of costs. In spite of these costs, and in spite of increased mandatory disclosures, firms choose to voluntary disclosure financial information to analysts and others. This indicates that firms also benefit from providing additional information. The subjects of this study is 431 annual reports from firms listed at the Stockholm Stock Exchange for 2002 and 2005 and the objective is to survey factors that can explain variations in firms? voluntary disclosure.

The degree project is performed at Metso Kamfab. The production is aimed on machines everything from handling of fiber to paper pulp. Metso Fiber and Kamfab are using Pro/Engineer for design and blueprint production. The processing department types the NC-programs in notepad on the basis of the blueprints, the CAD-dates that already is there are not used. The aim with the work is to study if Kamfab can use CAM-system for processing and production of programs for their NC-machines.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

In recent years, Lean has been implemented in a variety of companies with focus areas that differ from the conditions that characterizes manufacturing. This transfer has contributed to fairly superficial results because companies almost exclusively focus on Toyotas methodology and not on the goal of Lean. The effort of transforming Lean from manufacturing to any organization requires a definition on a general level and a view of Lean as a system. One of the core principles of Lean and the foundation of continuous improvements is standardized work. In product development there is a negative view on standardized work, where the engineers state that the principle is not applicable for knowledge processes that include non-repetitive and creative work.In the framework of this master thesis literature has been studied to find support that standardized work is applicable for product development and areas that include knowledge processes.

This study aims to explain the Stuxnet-attack against Iran in 2009-2010 by using the IR-theory of structural realism. By doing so the theory also faces the challenge of the impact of the information revolution on security and international relations. The structural realism that is at hand is that of Kenneth Waltz and his Theory of International Politics from 1979.The study reaches the conclusion that Waltzs focus on the structure of the international system and the distribution of capabilities applies well to the case of Stuxnet as a cyber attack. The creators of the sophisticated Stuxnet, USA and Israel, also indicates that when it comes to this certain aspect of the information revolution and IR, states seem to still be the main actor. Finally the character of one of the major features of the Stuxnet-attack; the internet, is shown to have an anarchic structure that fits well as an extension of the realist view of the international system..

WebGL is a standard for drawing graphics in a web browser. Currently it isn?t widely understood how consistently WebGL performs across a majority of the de- vices that support it. Determining if an image looks correct to a human observer is an interesting problem. The solution for this is useful when developing WebGL applications, since a developer could make better informed decisions during de- velopment.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

Reading difficulties is the most common learning difficulty in the western world and it is common that people with reading disabilities also exhibit arithmetic difficulties. Different theories about the cause of the relationship exists, one theory describes the importance of good phonological ability in reading as well as in arithmetic, while another theory describes the importance of a reliable number system and that only a subgroup of students with reading disabilities also have difficulties with arithmetic. The purpose of this study is to investigate how students with reading difficulties (RD), without any known mathematical difficulties, perform on mathematical tasks relative to a control group. The study was theoretically grounded on the Triple code model (Dehaene, 1992), which is a model for numerical information processing that describes how various numerical and arithmetic tasks are processed through three distinct representation systems in the brain, a verbal and a visual representation system and a quantity system. Reading skills, phonological skills, arithmetic skills and number processing skills were examined in 61 students through a variety of tests.

The purpose of the study was to analyze how media, in this case, the daily newspaper Dagens Nyheter, produces the men and women in men's violence against women in close relationships in news articles and if there has been a change over time in this production. It is a qualitative study in which 40 news articles from DN were analyzed. The starting point in the tanks around the analysis is from a social constructive perspective. Critical discourse analysis is the method I chose to use in the processing of news stories. The result is divided into four different blocks where each block presents the results and the analysis for the following years: 1994, 1999, 2004 and 2009.

Abstract This essay is about the visibility of everyday life in a nursing home. The thesis is based on the following questions: What characterizes the social life and conversation between staff and residents? What content has the social life and the conversation between these parties? What is the power relationship between the staff and residents? To answer these questions, we used the qualitative approach with open observations, along with interviews. The study is partly based on direct observation by an observer as a participant in a special housing, and on semi-structured interviews with seven respondents, three of them staff and four residents in the same nursing home. For the results and analysis section, we use the Grounded Theory as a method which constructs a parallel between data processing and analysis of the interviews, where we first encode, categorize and create themes.

This study is an attempt to examine the information needs and use in everyday tasks inthe work environment of community health nurses. The purpose of this paper is double toexamine the information need and use of the community health nurses and to test and validatea method and a theory for the studying of information need and use in workers everydaytasks adapted from Byström and Järvelin (1995). Most of the data were collected throughdiaries kept by the informants in close relationship to the problem situations and were analysedqualitatively. Furthermore a literature survey was made in nursing infomatics and informationscience and it showed that there is no absolute common ground between the disciplinesin the way they use the information concept.The theory and method were validated in a broad outline and were very useful in the study ofcommunity health nurses' information needs and use. The study also shows that the contextof community health nurses plays an important role in the nurses information behaviour..