This is a graduate work at the Swedish University of Agricultural Sciences, The Department of Urban and Rural Development, Ultuna. The purpose of this paper has been to find out and describe principles for designing parks that offers good recreational and aesthetical values and require little amount of carbon dioxide emissions during their maintenance. The purpose has also been to see if it's possible to use city wastewater in some extent to assure the plants water supply and to find other means to make it less necessary to use purified water for watering. Recently made studies as well as older ones show how important green areas are in dense city structures both from a health and a climate perspective. Trees and other plants adsorbs different forms of air pollution and can also lower the temperature in the surrounding area through their transpiration.

This report is commissioned by the Water and Sewage Agency in The City of Mariehamn, Åland. The basic aim is to investigate positive or negative effects of a relocation of the sewage pipe from a wastewater treatment plant, Lotsbroverket. The environmental licence of Lotsbroverket is to be revised and The Environmental Appeal Board at Åland?s Government and Administrative Board has made demands that several possible locations in an outer water area should be examined. The present location of the sewage pipe is in Svibyviken, which has been classified as an ?inner water area?.The objective of this work is to study to which extent the nutrient loading from Lotsbroverket influence the environmental conditions in Svibyviken, and to investigate the suitability of different locations of the wastewater pipe from Lotsbroverket.The way a coastal area looks, i.e., its morphometry, determines to a large extent its ecological characteristics.

Even though Sweden is a small country which has a low rate of inhabitants is it one of the worlds leading nations of exporting products from the forest industries. The Importance of a sustainable use of the Swedish forests has been known for many years. In 1903 the first law of forestry were establish. Today the National Board of Forestry carry out inventories of regeneration result. The result of the latest inventory showed that especially the non-industrial private forest owners did not full fill the regeneration work after a clear cut.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

The aim of this study was to investigate a health intervention at a Swedish telecom company, with regards to behavioral, cognitive and somatic stress, experienced health, and absence due to illness. A further aim was to investigate the employees' perceptions regarding the health intervention. Questionnaires were collected from 139 employees at the customer service departments.Results indicated that the health activity bowling to some extent could predict lower behavioral stress. However, the most important predictors of stress and perceived health were lack of meaningfulness and quantitative demands. Lack of meaningfulness was also a predictor of absence due to illness.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

The worldwide industrial demand of energy, often in form of fossil fuel, is continuously growing and at the same time these resources are coming to an end (Hamamre, 2013). The interest and focus in renewable sources are then more important than ever and plants are suggested to be a good alternative for production of raw material for industrial purposes (Nilsson et al., 1998). But the world is also facing an increasing world population which also increase the nutritional needs, plants therefore need to be suitable for both industrial and nutritional purposes. To achieve this, common plants need to be improved but it also need new potential crops to be developed and introduced (Carlsson et al., 2009). Modern technology like gene engineering is an important tool to achieve these challenges (Carlsson et al., 2011). This work focused on analyzes and evaluation of different transgenic lines of field pepperweed (Lepidium campestre L.).

Emissions of insufficiently treated wastewater, mainly blackwater (i.e. wastewater from toilets), contributes to the eutrophication of lakes and seas. At the same time, blackwater is a fraction with a low content of heavy metals and, after sanitization, it can recirculate plant nutrients to arable land using the liquid composting treatment method. Liquid composting means that organic material is degraded under aerobic conditions. For sanitization, the blackwater needs to be treated together with energy-rich complementary material.

AbstractThe urgency to find alternative fabrics to conventionally produced cotton is increasing as vast amounts of agrochemicals are used and a lot of irrigation is required. In this literature survey the potential of organic cultivation practices to produce highly qualitative hemp fibre, suitable for the textile industry, was investigated. The definition of a fibre in the textile context as well as of the qualities that are essential for a textile fibre was necessary as a base for the discussion in this thesis. The quality parameters looked at were fineness, strength, length, friction, and colour. The impact of external growth factors and plant development on these quality properties are discussed.

Detta examensarbete genomfördes på ABB Power Technologies AB i Ludvika. ABB vill överbrygga gapet mellan industri och informationsteknologi för att få de båda delarna att arbeta integrerat. ABB kallar detta koncept för Industrial IT (IIT). Ett krav från koncernledningen är att alla produkter ska vara certifierade enligt nivå 0, som är det första steget i IIT: s certifieringsprocess. Målet var att utföra en kravspecifikation på ett system som ska kunna leverera certifierad produktinformation enligt IIT-standard.

Background: The stress in the society seems to having become more amplified and more trying. Statistics show that the appearance of stress related industrial diseases have increased strikingly. What can be stressing at the workplace? The work conditions are not the only thing that causes stress but no matter what the causes are employers have to restore the employees to their former positions. How are companies dealing with the problems of stress in reality? Do they have formulated strategies for how to manage the problems? Purpose: The purpose with this essay is to try to see pattern in how companies manage and treat stress and stress related industrial diseases.

AbstraktWestin Mikael, Den industriella revolutionen i läroböckerna - En studie av tre läroböckers behandling av den industriella revolutionen, (The Industrial Revolution in the teaching books - A study of the industrial revolution in three teaching books). Individ och samhälle, Lärarutbildningen 60 poäng, Malmö Högskola, 2006.SyfteSyftet med följande arbete är att undersöka hur läroboken hanterar den industriella revolutionen samt även hur lärarna förhåller sig till läroboken. MetodArbetet utgår från Geoffrey Partingtons teori om historisk signifikans och testar den tillsammans med en klassisk bakgrund-händelse-förlopp modell på läroböckernas redogörelse för den industriella revolutionen. En kvantitativ enkätstudier bland gymnasielärare i historia A gjordes för att fånga deras bild av industriella revolutionen och läroböckernas behandling av den. ResultatDe tre undersökta böckerna uppvisar en splittrad behandling av den industriella revolutionen.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

This master thesis encompasses an inventory of the older industrial community of Gimo. Investigations of the contamination situation for each industrial area were done. A risk classification according to the Swedish Environmental Protection Agency?s ?Method of Surveying Contaminated Sites?, phase one, followed. The risk classification was done on areas of Iron Work, a rockwool industry and a landfill. Gimo have had iron manufacturing from 1615 until 1945. Gimo have had two blast-furnaces and two smithies periodically.

In Rio De Janeiro, 1992, was the first document signed that meant a responsibility for industrial countries to decrease their emissions, United Nations Framework Convention on Climate Change (UNFCCC). Thirteen years later was the first legal binding document signed, the Kyoto protocol, and for the first time industrial countries all over the world was bound to decrease their emissions on greenhouse gases. Within the framework of this commitment, three flexible mechanisms (Clean Development mechanism, Joint Implementation and Emission trading) were introduced with the function to reduce the economical costs of the commitment. The flexible mechanisms Emission Trading (ET) is what this report is about.The report starts with a description of carbon dioxide and it?s effect on the environment, thereafter comes a background review of the national agreements who lies as a ground to the implementation of emission trading as a management control measure in Sweden and the rest of the world.Keywords: United Framework Convention on Climate Change, Kyoto protocol, Flexible mechanisms, Emission trading, carbon dioxide .