The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

The aim of this study was to investigate a health intervention at a Swedish telecom company, with regards to behavioral, cognitive and somatic stress, experienced health, and absence due to illness. A further aim was to investigate the employees' perceptions regarding the health intervention. Questionnaires were collected from 139 employees at the customer service departments.Results indicated that the health activity bowling to some extent could predict lower behavioral stress. However, the most important predictors of stress and perceived health were lack of meaningfulness and quantitative demands. Lack of meaningfulness was also a predictor of absence due to illness.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

The worldwide industrial demand of energy, often in form of fossil fuel, is continuously growing and at the same time these resources are coming to an end (Hamamre, 2013). The interest and focus in renewable sources are then more important than ever and plants are suggested to be a good alternative for production of raw material for industrial purposes (Nilsson et al., 1998). But the world is also facing an increasing world population which also increase the nutritional needs, plants therefore need to be suitable for both industrial and nutritional purposes. To achieve this, common plants need to be improved but it also need new potential crops to be developed and introduced (Carlsson et al., 2009). Modern technology like gene engineering is an important tool to achieve these challenges (Carlsson et al., 2011). This work focused on analyzes and evaluation of different transgenic lines of field pepperweed (Lepidium campestre L.).

This final project includes an analysis and a programme proposal for the area Bergsbrunna södra. The area is situated along the railway between Uppsala ? Stockholm, just south of Uppsala city. A new railway station is planned here, which make the area attractive as residential area. There are several values to take into consideration when developing an area. An extensive analysis and valuation may define and protect different characters and values, and also find the places most suitable to build upon. The area consists of three separate characters of landscape: the wide open cultivated fields, the hilly wooden ground and the more varying little valley. There are visual, cultural, social and ecological values to preserve. The south part of the area is woods with high natural values that borders to a national park in the natural forest of Lunsen.

AbstractThe urgency to find alternative fabrics to conventionally produced cotton is increasing as vast amounts of agrochemicals are used and a lot of irrigation is required. In this literature survey the potential of organic cultivation practices to produce highly qualitative hemp fibre, suitable for the textile industry, was investigated. The definition of a fibre in the textile context as well as of the qualities that are essential for a textile fibre was necessary as a base for the discussion in this thesis. The quality parameters looked at were fineness, strength, length, friction, and colour. The impact of external growth factors and plant development on these quality properties are discussed.

Detta examensarbete genomfördes på ABB Power Technologies AB i Ludvika. ABB vill överbrygga gapet mellan industri och informationsteknologi för att få de båda delarna att arbeta integrerat. ABB kallar detta koncept för Industrial IT (IIT). Ett krav från koncernledningen är att alla produkter ska vara certifierade enligt nivå 0, som är det första steget i IIT: s certifieringsprocess. Målet var att utföra en kravspecifikation på ett system som ska kunna leverera certifierad produktinformation enligt IIT-standard.

Background: The stress in the society seems to having become more amplified and more trying. Statistics show that the appearance of stress related industrial diseases have increased strikingly. What can be stressing at the workplace? The work conditions are not the only thing that causes stress but no matter what the causes are employers have to restore the employees to their former positions. How are companies dealing with the problems of stress in reality? Do they have formulated strategies for how to manage the problems? Purpose: The purpose with this essay is to try to see pattern in how companies manage and treat stress and stress related industrial diseases.

AbstraktWestin Mikael, Den industriella revolutionen i läroböckerna - En studie av tre läroböckers behandling av den industriella revolutionen, (The Industrial Revolution in the teaching books - A study of the industrial revolution in three teaching books). Individ och samhälle, Lärarutbildningen 60 poäng, Malmö Högskola, 2006.SyfteSyftet med följande arbete är att undersöka hur läroboken hanterar den industriella revolutionen samt även hur lärarna förhåller sig till läroboken. MetodArbetet utgår från Geoffrey Partingtons teori om historisk signifikans och testar den tillsammans med en klassisk bakgrund-händelse-förlopp modell på läroböckernas redogörelse för den industriella revolutionen. En kvantitativ enkätstudier bland gymnasielärare i historia A gjordes för att fånga deras bild av industriella revolutionen och läroböckernas behandling av den. ResultatDe tre undersökta böckerna uppvisar en splittrad behandling av den industriella revolutionen.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

This master thesis encompasses an inventory of the older industrial community of Gimo. Investigations of the contamination situation for each industrial area were done. A risk classification according to the Swedish Environmental Protection Agency?s ?Method of Surveying Contaminated Sites?, phase one, followed. The risk classification was done on areas of Iron Work, a rockwool industry and a landfill. Gimo have had iron manufacturing from 1615 until 1945. Gimo have had two blast-furnaces and two smithies periodically.

In Rio De Janeiro, 1992, was the first document signed that meant a responsibility for industrial countries to decrease their emissions, United Nations Framework Convention on Climate Change (UNFCCC). Thirteen years later was the first legal binding document signed, the Kyoto protocol, and for the first time industrial countries all over the world was bound to decrease their emissions on greenhouse gases. Within the framework of this commitment, three flexible mechanisms (Clean Development mechanism, Joint Implementation and Emission trading) were introduced with the function to reduce the economical costs of the commitment. The flexible mechanisms Emission Trading (ET) is what this report is about.The report starts with a description of carbon dioxide and it?s effect on the environment, thereafter comes a background review of the national agreements who lies as a ground to the implementation of emission trading as a management control measure in Sweden and the rest of the world.Keywords: United Framework Convention on Climate Change, Kyoto protocol, Flexible mechanisms, Emission trading, carbon dioxide .

The purpose of this thesis was to investigate how an industrial company can increase customer value by offering added services to their core products. Theses added services can be categorized into the three different parts of the buying process. The company that was investigated is Smurfit Kappa Kraftliner in Piteå, a large international industrial company active on a business to business market. We have conducted a case study and made interviews with three respondents within the company. The result of the study show that the company offers value added services in each stage of the buying process.

This paper is about employees' opinion towards libraries. The target group consists of employees at industrial research institutes in Sweden. Libraries offer several more services today than they have done before. I think many people do not recognise all of them and I also think the knowledge and the opinion about libraries have to do with use of them. Since I am curious about if this is true or not the purpose of this essay is to find out, through an attitude research, the employees', at industrial research institutes, opinion about library service.

Sweden has a long tradition as a mapmaking nation. Tens of thousands of historical maps,dating from the sixteenth century and onwards are still preserved in archives today, providinga rich resource for studies of city growth and changes in the landscape through time. For morethan ten years an effort has been made by public authorities to transfer this material frompaper onto digital media. Due to modern technology, as for example GeographicalInformation Systems (GIS), researchers have been given improved possibilities to study andanalyze this material. This study uses a qualitative approach, based on both literature studiesas well as map studies.