Purpose: The aim with the report is to investigate if the South East Asian customer on the food processing market base their investments on Total Cost of Ownership and if so, which are the cost drivers considered most vital. Moreover, do these cost-drivers diverge from the perception FP Ltd has, and if so, can a Total Cost of Ownership-model help to achieve a mutual understanding? Methodology: First a descriptive approach will be taken, identifying FP Ltd?s employers? perception on how to meet the customer. This will later be compared to our empirical findings of the actual customer behaviour in Thailand and Vietnam. Thorough analyse of the gap between the two parts will give us the outcome whether or not FP Ltd will have any use of presenting a quantitative model justifying their higher price.

Spectacular buildings and categorized districts are becoming more common elements in cities. In many cases, they are the result of city branding, which means choosing a city image and dealing with it like a brand to profile and compete against other cities. This essay study what impact on and roll in urban planning the trend might have. The first part relies on literary studies and describes what has been written about city branding. The globalization, the experience economy, urban management, urbanization and the theory of the creative class are pointed out as driving forces of the popularity and the spread of city branding.

This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

Research question: How does the industrial company Scania work to get more women in leadership positions?Purpose: The purpose of this work is to describe how companies in a male-dominated industry can work to get a higher share of female leaders.Method: This survey was based on a deductive approach with a qualitative method. Theories have been obtained primarily from scientific articles and the empirical part has been collected through interviews from the companies Wiminvest and Scania.Conclusion: The conclusions the study came up with was different elements that companies in male-dominated industries can work with to get a higher share of female leaders. The first thing that companies can do is to join the project BON or similar projects to work on this issue. They can work with workshops and lectures to disseminate knowledge about the topic.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

AbstractThis degree thesis was made in cooperation with Chematur Engineering in Karlskoga.Many of the environmental issues of today are a result of the motor traffic. Consumption of fossil fuels harms our environmental through formation of carbon dioxide and other greenhouse gases. To get under control with our environmental issues it?s important to find substitutes for oil that are both cheap and environmentally friendly. Ethanol has a long history as a motor fuel and is both enviromentally friendly has a high efficiency.According to the EU commissions directives for motor fuels, 5, 75 % of all the fuels in Sweden should be renewable in 2010.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

Background and problem: There is a continuous debate regarding incentive programs in public companies. Since the global financial crisis and the subsequent recession in 2008, the criticism has reached even higher levels. Various regulatory authorities as well as influential external actors require stronger regulations and limitation of the monetary compensation in publicly held companies. Share-based payments are based on the development of the market value of the company. This means there is an existing relation between the owners? and the managers? interests.

Perfluoroalkyl substances (PFASs) are ubiquitous in the environment today and they have been detected even in remote areas such as the Arctic. PFASs can be transported by the atmosphere and ocean currents but the transport mechanism is not fully understood. PFASs may be harmful to organisms due to their persistence in the environment, bio-accumulation potential and toxicity. Studies have shown that PFASs can cause adverse effects on the metabolism as well as the endocrine- and reproduction systems in organisms. In this study, PFASs were investigated in glaucous gull (Larus hyperboreus) (n=5) and black guillemot (Cepphus grylle) (n=4) from Svalbard.

Introduction: The number of hearing impairments in Sweden is increasing. The largest increase is seen in ages 25-44. There are reasons to believe that these impairments are noise induced. Leisure time noise is not controlled in the same manner that industrial noise is. An ongoing conflict between city council officials and rock club owners, musicians and music event organizers about sound levels at smaller live music clubs exceeding the national sound level restrictions created the need for an acoustic intervention project.

AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

SammanfattningTitel: En Jämförelse i Blancokredithantering mellan Svenska Nischbanker från Detaljhandelsbranschen och Universalbanker Ämne: Industrial and Financial Management Central Begrepp: Blancokredit, Kreditrisk, Kreditprövning, Nischbanker Forskningsfrågor:? Använder svenska universalbanker och nischbanker med ursprung från detaljhandelsbranschen samma kriterier för riskbedömning vid blancokreditgivning?? Hur skiljer sig deras kredithantering?Syfte: Syftet med studien är att göra en jämförelse i blancokredithantering mellan nischbanker med ursprung från detaljhandelsbranschen och Sveriges universalbanker. Detta för att utreda eventuella likheter och skillnader och belysa dessa i en modell. Metod: Vi har valt att använda en deduktiv metod och utfört en kvalitativ undersökning. Våra undersökningsobjekt avgränsas till Svenska nischbanker med ursprung från detaljhandelsbranschen och universalbanker.

Since the nineties the words customer, effectiveness and quality have become part of everyday school life. Municipalities? makes regular customer surveys to measure both independent schools as municipal schools ' quality. A common method for customer research and background studies is that parents and students are asked to respond to simple Web-based surveys. Customer satisfaction and/or customer dissatisfaction options are presented in tabular form, based on the percentage that expresses a particular position within a query.