Deltaco är ett medelstort företag som säljer IT-relaterade produkter till datorbutiker, installatörer, industrikunder etc. men ej till slutkund. Deltaco har ett dotterbolag i Finland och ett i Danmark och flera avdelningar i Flemingsberg. Examensarbetet gjordes på avdelningen som heter RMA ( Retur Material Authorization). RMAs uppgifter är att ta hand om returnerade produkter som omfattas av garanti.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.

Wind power is a growing energy sector in Sweden. However, it still represents only a small part of the total electricity production, about 0.7%. In order to create good conditions and to facilitate the establishment of wind power in Sweden, the government has for example, created a national centre for wind use. The objective has been to reach the governmental goal, which is an expansion of wind power by 10 TWh by year 2015 compared to the level in 2002. The Swedish electricity market was deregulated in 1996 which refers to the introduction of a competitive market in electricity production and trade.

The Nasometer is a non-invasive acoustic measuring instrument that quantifies the ratio ofnasal resonance in speech. It can be used as a complement to perceptual judgment of speech impediments, for example, in patients with cleft palate and velopharyngeal insufficiency. Inorder to determine if a nasalance score is abnormal, it must be compared to norm data. The main purpose of the study was to collect reference nasalance scores in children between fourand five years of age in Linköping. An additional objective was to compare the results tonorm data collected in Umeå.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

Recent studies show that manufacturing companies to a larger extent use historical cost accounting in their internal accounts, at the expense of calculated costs. The explanation behind this is claimed to be that firms are subject to careful scrutiny by the stock market. Consequently, top management stresses the need of evaluating all parts of the firm from external accounting. However, lower management levels express a general concern that the incentive to invest in machines will decrease. This master thesis aims to investigate whether or not there is an objective reason behind this concern.

?A culture center should be visually welcoming as well as attract a diverse range of visitors with different backgrounds.? This was the client?s request for a new cultural center in Nairobi. The location is in the heart of Nairobi?s industrial area, near several existing buildings that are already in use by the culture organization known as Go Down. I have chosen to keep most of the existing buildings and to use my new building as a complement for the desired program.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

This project has been about making a design suggestion for a boat accessory that adjuststhe distance between a sail-or motorboat and the dinghy, which is connected by a rope inthe stern. Today this is all done by hand and can lead to problems when it comes tostressful situations such as harbors and narrow passages.A company called Sailsafe came up with the idea and the construction, which they alsohave tested. I found them through an acquaintance at Dacat AB where I did an internshipin the fall of 2010.Using sketching as the primary tool I?ve worked in an almost-real design project with theaim to develop my skills and give the company a relevant design suggestion. Dacat thenhelped me with a 3d model in Alias, which was printed in 3d and painted in thepaintworkshop at school..

In the country of Jordan, egg production is very important economically, but several bacte-ria are involved in food borne diseases transmitted from eggs or other poultry products. The most important are Salmonella spp., Campylobacter jejuni and Escherichia coli. In Jordan two different housing systems are used for hens in large scale egg production; con-ventional cages and litter floor systems. Eggs from four different farms were analysed and compared to see if a difference could be found regarding the presence of pathogenic bacte-ria on the egg surfaces between these two systems. Total number of aerobic bacteria was analysed, the presence of Salmonella spp., C.

This study is about the use of textbooks in teaching English as a second language and about teachers? attitudes and opinions of using textbooks during lessons. The aim of the study is to receive a deeper understanding of the use of textbooks in English teaching and to learn about why teachers choose whether to use the textbook approach or not. The study contains an analysis of the textbooks the teachers in our study used. The analysis shows the actual content and the types of texts together with the design and the structure of the textbooks.

A growing issue in the construction industry is how production can become moreefficient by using logistical solutions. Companies can minimize the cost of a project byreducing the time to perform the work.The purpose of this report was to examine the logistics related to pipe trenches forSIAAB. The report's focus has been on solving problems and planning that wouldfacilitate the work of the project Vaksala-Lunda Etapp 3.The case study consists of interviews with SIAAB's employees and an observationwhere the progress of a traditional pipe trench has been documented using checklists.Questions to the report?s case study come from the theoretical part, which is basedon literature on construction management and logistics in general. The observationlasted five weeks and the biggest time-consuming events that affected the pipe trenchduring this time, has received most attention.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.

Mussel meal is a potential source of protein, with a good composition of amino acids, for laying hens and broiler chickens, and may replace the use of fish meal in organic poultry production. Lead and cadmium are heavy metals which occur in the environment and can be accumulated in mussels. When poultry are exposed to heavy metals, the metals are absorbed in the small intestine and distributed in the body in the form of ions, complexes or bound to proteins. In poultry, lead accumulates in bone tissue, liver and kidneys, while cadmium accumulates in liver and kidneys. Generally very low concentrations of these heavy metals occur in muscles of broilers which have been exposed to feed contaminated with cadmium or lead.