The aim of this study is to clarify the Swedish government?s purpose of participating in theEuropean Union Emission Trading Scheme. Taking as its departure point state-centricinternational political economy this study presents three plausible hypotheses on what thepurpose might be. Either it is to promote consumers interests, or to promote the Swedishnational climate goal ?Reduced impact on climate?, or to promote the profit of Swedishcompanies.

This final project discusses renewal and upgrading of the area of Prim. It is discussed how this industrial area can be an attractive neighborhood with a varied range of services and commercial trade. Prim is located 2km north-east of the center of Barcelona. The area boarders to a deep railway valley that historically has separated Prim from its neighboring districts. At present there is almost no housing, services or commercial trade within the area and the industry is discontinued or the existing industrial buildings are derelict.

This degree project aims to evaluate alternative methods to the unanaesthetized castration of piglets. Castration of piglets is performed to prevent the development of boar taint. Boar taint can cause great financial losses for the pig manufacturer. Unanaesthetized castration of piglets is not regarded to be satisfactory from an animal welfare perspective and the procedure will for that reason be outlawed in the near future.Several alternative methods are used in countries all over the world with promising result. The purpose of this study is to evaluate if this methods could be applied in Swedish pig production.A literature study has been combined with interviews; field studies, questionnaires and a small study on male pig production.To be applicable to and applied in Swedish pig production the alternative method must be financially accepted by the manufacturers but also accepted from an animal welfare perspective.Castration is the only way to guarantee a meat free of boar taint.

Algal bloom is a naturally occurring phenomenon and occurs in all waters around the world but in recent years, algal bloom in the Baltic Sea has become more massive and more widely spread. When an algal bloom negative effects on the seawater quality, it may have an impact on tourism in the Baltic Sea. The aim of this thesis is to study, through a survey based on a production function approach, whether an environmental change as algal blooms, influenced the Gotland tourist accommodation industry and their "production of attractive overnight? in the summer of 2005. The results show that algal blooms did not have a great impact on companies ?production of attractive accommodations".

Evaluating and choosing suppliers based on price alone, has traditionally been the dominant strategy for supplier selection within the purchasing function. With the origin of the Total Cost of Ownership (TCO)-concept in the early 1990s, a new philosophy dawned that promoted the importance of knowing the effects of supplier performance on the buying firm?s internal costs. Since then, scholars have been arguing the case of TCO as a viable model for making purchasing decisions and conducting supplier evaluation. Still, after two decades little is known about its penetration and impact on the practices of buying corporations, leaving the questions of which costs are included in the purchasing organisations? decisions unanswered, and even more importantly why certain costs are considered and others not.

Because of the increasing trends in energy consumption and increased environmental awareness, greater focus has been placed on improvement and development of renewable energy sources. An already proven and accepted method is biogas production from anaerobic digestion at municipal wastewater treatment plants.In the waste water treatment process solid material and dissolved pollutants are separated from the water, forming a sludge. The sludge is separated from the process and stabilized during anaerobic digestion or aerobic aeration. Most often, mesophilic anaerobic digestion is used. Because of degradation by microorganisms, biogas with a high content of methane is formed during the digestion.

Today there is a limited demand for quality certified cereal in Sweden. The demand can in the future increase and become a requirement for the entire market. Since the first of January 2005, grain producers in Sweden are food producers and traceability is important for the food industry. It is possible for grain producers to certify the productions under the certification IP SIGILL. The purpose of this essay is to explore why some grain producers continue to be certified while other producers end the IP SIGILL certification.

This report is a study made at Pallco AB. Pallco is a subcontractor that is specialized on steel and aluminium components.The aim of the report is to show an improvement proposal that leads to a reduction of the storage and improve the flow through the production of one item that is a part of a product that Pallco manufactures.With the increasing competition from other countries who can manufacture with lower costs must Swedish companies try to make theirs manufacturing as efficient as possible and remove all waste. By using the tools of Lean Production it is possible to reduce the costs and increase the efficiency.The method we used is value stream mapping. A map of the present condition has been made and then different improvement proposal were discussed. A map of a future condition has also been designed..

This study has investigated the possibilities of implementing lean in a division of a hospital in Stockholm. The goal was to reduce the lead time for the patient to get his diagnose by implementing lean in the two production flows of this division. In order to accomplish it, a complete map over the value stream has been done. With the help of the value stream map and lean theory a list over the processes in contradiction with lean has been made. Finally propositions to implement lean and by this way reduce the lead times in this stream have been made out.

The environmental assessment system Miljöbyggnad is a Swedish system initiated by Bygga-Bo-Dialogen to assess buildings with regards to three main areas; ?Energy?, ?Indoor climate? and ?Materials?. A building can obtain three different classifications depending on how well it manages to meet the demands. GOLD is the highest classification and is followed by SILVER and BRONZE. The majority of the measures needed to comply with the demands are done during the design phase.

The Swedish building contractor JMRegion Öst would like to to investigatethe possibilities of developing andstreamlining the production of singlefamilyhouses. JM are producing singlefamilyhouses with prefabricated framesat a rate of about two houses per week.During construction, the different tasksare performed by JM?s own productionstaff but also by varioussubcontractors.When examining the schedules of recentlyproduced projects, it appears that allthe houses are more or less completedeight weeks before the customer moves into the house. During those eight weeksseveral operations are conducted such asinspections, installation of appliancesand cleaning procedures. The inspectionperiod constitutes between 25 and 35% ofthe complete construction period.By conducting interviews, it has beendiscovered that this final phase is anessential security buffer for delays anderrors that often occur.

Företag kan använda sig av balanserade styrkort för att få ner organisationens övergripande mål i mindre delar. En fördel med det är att de anställda blir mer involverade och motiverade till att göra ett bra arbete. Styrkortet består av flera styrtal som mäter olika prestationer. Sie-mens Industrial Turbomachinery AB, även kallat SIT AB, använder sig av balanserade styrkort och har även ett antal styrtal på individnivå på avdelningen MIP. I dagsläget är inte de styrtalen tillförlitliga och därför fick vi i uppdrag av SIT AB att undersöka hur arbetet med individuella styrtal kan förbättras.Syftet med studien är att beskriva hur MIP, en av de strategiska inköpsavdelningarna på SIT AB, arbetar med individuella styrtal idag, identifiera deras problem med individuella styrtal samt att utveckla lösningar till problemen.Vi har pratat med anställda på en av SIT AB:s strategiska inköpsavdelningar, fått skriftlig dokumentation tilldelade samt hittat relevanta teorier och det är de källorna som har utgjort grunden för vårt examensarbete.

The purpose of this master?s thesis was to find problems that occur in the production line at Atlas Copco Rocktec Division, in order to decrease the costs of defect in quality. When the problems were distinguished, the authors ought to choose the problem with the highest improvement potential. One request from the constituent at Atlas Copco Rocktec Division was to connect the improvement to the document The Way We Produce. The document provides information and values about Atlas Copco and consists of 10 principles to be able to reach their vision.

When a company is part of an agreement there is a risk that one of the collaborators pursues similar business and takes up competition with the partner or chooses to reveal information about their partner to other parties. To avoid this, companies establish a confidentiality agreement that prohibits the parties to reveal any information. Confidentiality agreements that are eternal have become more common in Swedish contract law in commercial relations. As a result, disputes between collaborators have occurred regarding the unreasonable length and validity of the agreement at a later stage.When a confidentiality agreement is considered to be unreasonable, 36 § of the Swedish contract law (AvtL) can be applicable. The paragraph deals with the legitimacy and the opportunities of re-adjustment of the unreasonable contract.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.