Gamification är en strategi som använder spelmekanismer och spelkomponenter för att skapa motivation och engagemang hos användare av olika typer av system. Denna studie syftar till att undersöka om gamification kan användas för att motivera användare av system för tillverkningsindustrin.Studien har genomförts med en initial litteraturstudie och kvalitativa intervjuer med experter inom gamification samt utveckling av system för tillverkningsindustrin. Intervjufrågor har därefter ställts mot tidigare genomförd forskning, för att identifiera möjliga resultat.Resultatet av denna studie visar att spelmekanismer och spelkomponenter skulle kunna användas i ett system för tillverkningsindustrin, förutsatt att det finns ett tydligt affärsmål, mätbar och användbar data samt identifierade drivkrafter hos organisationens maskinoperatörer. Vidare har ett antal punkter identifierats som kan vara motiverande för en användare av system för tillverkningsindustrin:Möjlighet för operatörerna att följa utvecklingen i sitt expertområdeKartläggning av operatörernas drivkrafter, vilken därefter används för att förbättra operatörernas arbetssituation, med exempelvis mer givande uppgifterBelöningar som utdelas är matchade mot operatörernas preferenser, med syfte att vara mer effektiva som motivationsskapare.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Under sommaren 2012 genomfördes ett examensarbete på Siemens Industrial Turbo­mach­inery AB i Trollhättan gällande möjligheterna att införa pappers­lös verkstad. Syftet med examensarbetet var att kartlägga möjligheterna att minska administrativ hant­ering av produktions­orderkort och öka realtidsuppdatering. För att av­gränsa studien avsåg examens­arbetet endast flödet av produk­tions­­­order­kort ifrån plan­er­ings­avdelningen genom två pro­duk­tions­grupper och vidare in på gods­­­­avdel­ningen.För att kartlägga flödet för den manuella hanteringen av produktionsorderkort upprättades värdeflödesanalyser. Dessutom genomfördes ett studiebesök på Volvo Aero Corporation för att se hur ett annat företag har gjort för att eliminera elektronisk produk­tionsorder. Utifrån värdeflödesanalyserna och studiebesöket identifierades tre frågeställ­ningar vilka an­sågs vara betydelsefulla för att kunna införa elektronisk produk­tions­order.

Abstract Title: Enabling Smart Research and Development through Knowledge Conversation Seminar date: 2005-06-08 Course: Master thesis in business administration, 10 Swedish credits (15 ECTS) Authors: Andreas Johnsson, Johan Rosendahl Advisors: Lars Bengtsson Key words: Knowledge management, Knowledge conversation, Research and development, Ba, Trelleborg Purpose: The purpose of the thesis is to create a model that shows how knowledge management aimed at research and development processes can be used and how the theoretical fields can be connected. Methodology: The thesis is based on abductive perspective where empirical and theoretical material has been mixed to create a foundation for the analysis. Theoretical perspectives: Theories concerning knowledge management and research and development have primarily been used. These have been complemented with material about team structures and incentive systems. Empirical foundation: The empirical material is based on semi structured, mostly qualitative interviews and strictly quantitative inquiries performed at Industrial Hose within the Trelleborg group.

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

This study focuses on the internal marketing and how it affects the complaints by companies? communication control. Our purpose with this subject is to increase the understanding of which components affects the relation between internal marketing, communication control and complaints. We have chosen the subject, internal marketing because it caught our interest in an earlier course. On the basis of the literature of costumer complaint there have not been so much research about it and that is why we have chosen this perspective on internal marketing.This study is based on a qualitative approach.

A new site- and construction-law came into effect in May 2011. The new law, PBL2010:900 implies several different changes of the law. These changes concern bothconstructors, people working in municipality and county councils and other peoplethat in some way are related to the building sector. Except from the change in orderof the chapters and the renewed and modernized language, the law has now beenextended with a few new phases.According to the new law a certificate has to be issued to start and finish theconstruction; the construction consulting has changed name into technical consultingand the protocol for the controls has to show what the control is being compared to.This diploma work concerns control visits on construction sites as related to the newlaw. The reason why visits on construction sites are now implemented in the law isbecause the government saw a lack of trustworthiness in the old law.

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

As companies grow, their need for computing power will increase, which traditionally resulted in companies having to invest in more IT resources. Now, with cloud computing, companies can easily hire computer power over the Internet, on-demand. Cloud computing offers a highly scalable environment where companies can store data and host their services. This paper employs a qualitative study with interviews and literature studies to explore opportunities and challenges associated with cloud computing from a system developer perspective. The aim of the paper is to find out how cloud computing changes the conditions for system development. The paper contributes with four different opportunities and challenges that the system developer must handle to succeed in the world of cloud computing.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

This report presents suggestions and recommendations on how to convert an old industrial building, built in 1958, to an office hotel. One of the main criteria was that the floor plan should be flexible. The building is situated at Jonsereds Fabriker and the study was conducted for Hantverkslokaler i Göteborg AB, the estate owner.The survey is initiated with study visits at various office hotels, together with studies of literature regarding office planning. One conclusion from the study visits is that meeting-places, where the different companies can meet and exchange ideas and services, are important. Another one, and probably the most important parameter when planning offices is that they should have windows.

Today many industrial companies invest a lot of resources on research and development to resist the tough competition on the global market. This leads to a high risk game when the companies start many development projects, with uncertain outcome where some of the projects have to be terminated prematurely. The main purpose with this study is to identify factors, both internal and external, that influence the decision to terminate projects prematurely in Swedish development projects. Factors mentioned in the literature will be compared with case studies on three Swedish industrial companies to demonstrate the most important ones when taking such decisions. First a literature study was made to identify basic terms, a general project model and factors affecting the decision.

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..

The purpose of this study was to examine leadership in the public sector based on leadership models, organizational factors, conditions and health of employees. The study was divided into sub-study one and two. In sub-study one the design was an observational study using cross sectional design in which 67 first line managers in the public sector answered a survey about conditions and leadership models. Sub-study two was an observational study using case-control design focusing on a health promoting leadership intervention in the municipal sector. Two semi-structured interviews and 41 surveys were collected.

This bachelor degree project was carried out at Saab AB Service and Repair, Arboga, Sweden. The objective was to design, construct and implement a new stable and reliable method of measuring the continuous vertical displacement (height) of the military search radar PS861 mounted on a hydraulic powered elevator. The end product needs to be durable enough to be fully operational in the harsh environment of an outdoor elevator shaft and yet as accurate and precise as possible since one of its purposes is to calibrate control equipment. Previously used technique has proven not to meet any of the above mentioned properties.A prototype using a high resolution quadrature output rotary encoder has been developed, allowing a completely digital interface. This new method has been evaluated in laboratory environment where tests have been conducted regarding both reliability and validity.