The purpose of this master thesis is to construct a steering transmission, for a trackedvehicle, containing two hydraulic circuits which are connected. The steeringtransmission should be mechanical to avoid steer-by-wire.BAE Systems Hägglunds has in an earlier study examined a system with two hydraulicpumps and one hydraulic motor, but the safety of the system wasn?t sufficient.To achieve sufficient redundancy there must be two hydraulic motors, which arecontrolled separately. When the two systems are connected in one point, this point is acritical part of the system because it directly affects both circuits. If one of the hydrauliccircuits fails the other should be able to operate independently as a steeringtransmission.

Bergslagets museum is one of the oldest industrial museums in Sweden. It opened in 1922 in Falun, by the big mining company Stora Kopparbergs Bergslags Aktiebolag. This is a study of why a company would be interested in running a museum, why Bergslagets museum opened and who the people were that created it.Several persons were involved in collecting and organizing the models of old machinery, letters, paintings, pictures that was to become the Bergslagets museum. This paper shows different motives behind the opening of an industrial museum in Falun and gives a presentation of its superintendants, Carl Sahlin, Alvar Silow, Erik Johan Ljungberg and Olof Söderberg. All of them were central in the creating of the Bergslagets museum, today known as Gruvmuseet i Falun..

Studien syftar till att se hur personlighet, söka-arbete self-efficacy och locus of control påverkas av arbetslöshet. Personlighet mäts enligt Costa & MacCraes fem-faktor modell och avser dimensionerna extroversion, neuroticism, öppenhet, trevlighet och samvetsgrannhet. Hypotesen är att det finns skillnad mellan nyarbetslösa och långtidsarbetslösa avseende personlighet, söka arbete self-efficacy och locus of control. Frågeformulär innehållande påstående om ovanstående faktorer besvarades av en grupp nyarbetslösa och en grupp långtidsarbetslösa. Resultatet visar inga signifikanta skillnader avseende personlighet och söka arbete self-efficacy mellan grupperna.

Swedish school has for the last decades been using quality management as a method for improvement. Quality management is an enormous work and the whole school staff needs to be involved. The management consists of several parts like planning, surveys and interviews, analysis of the replies and setting up new goals. Parents, children and teachers are nowadays accustomed with quality surveys. The last few years these quality surveys have been computerized, but they still look almost the same, using little interaction with the respondent.I have had the opportunity to work with the company KMF Ventures, which has a vision that entails a more interactive web survey.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Lansen Technology develops and sells alarm systems. The communication between the system devices are wireless. The radio protocol used by the system is developed by Lansen with the purpose to be energy efficient. The alarm systems target groups are individuals, businesses and government agencies. The current system is installed, configured and controlled from a control panel for all audiences.

The change of control clause is nowadays a well used covenant in the Eurobond market, with the aims to protect bondholders in case of a leveraged buyout. This thesis intend to evaluate whether the change of control clause is a new phenomenon in the Eurobond market today and to estimate what have been the driven force for the popularity of it. The thesis found that the change of control clause already existed before and thus it is not a new phenomenon. Several factors where found though to explain the extended use of the clause today. Starting in 2005 the LBO activity increased rapidly, exposing almost every company to the risk of LBO.

Background: Running economy is one of the key factors to achieve top performance in endurance events. Little evidence exists for improving running economy using high-intensity interval training while running. Objectives: The purpose of this study was to examine how HIIT affects running economy and VO2max. Method: 14 well-trained athletes (age 35 ± 8,9 years, height 175 ± 11,7 cm and weight 69 ± 12,2 kg) were divided into two separate groups (HIIT and Control). HIIT group performed 3 HIIT exercises every week for 4 weeks and Control group continued with their separate training programs consisting of mostly traditional endurance training. Results: Running economy showed no improvement in HIIT (pre 38,62 and post 38,62 ml/kg/min, p=1.00) but Control improved (pre 45,41 and post 43,37 ml/kg/min, p=0,03). VO2max decreased in HIIT (mean 61,32 to 60,84 ml/kg/min) and in Control (mean 61,99 to 58,47 ml/kg/min)..

Background: Running economy is one of the key factors to achieve top performance in endurance events. Little evidence exists for improving running economy using high-intensity interval training while running. Objectives: The purpose of this study was to examine how HIIT affects running economy and VO2max. Method: 14 well-trained athletes (age 35 ± 8,9 years, height 175 ± 11,7 cm and weight 69 ± 12,2 kg) were divided into two separate groups (HIIT and Control). HIIT group performed 3 HIIT exercises every week for 4 weeks and Control group continued with their separate training programs consisting of mostly traditional endurance training. Results: Running economy showed no improvement in HIIT (pre 38,62 and post 38,62 ml/kg/min, p=1.00) but Control improved (pre 45,41 and post 43,37 ml/kg/min, p=0,03). VO2max decreased in HIIT (mean 61,32 to 60,84 ml/kg/min) and in Control (mean 61,99 to 58,47 ml/kg/min)..

A degree project has been carried out at Motion Control, Västerås. The degreeproject ?Grafisk Skärm för Inbyggda System? have developed a first prototype of anembedded system with a display, a graphical user interface with touchscreen andpossibilities to communicate with external units.The work initiated with surveys of critical components. A technical specification forthe desired end product was developed. With the technical specification as support,design specifications for hardware and firmware were developed.After the specifications were done, a circuit diagram was developed and a circuitboard was made.

The aim of this thesis is to describe the customer?s attitudes toward the contracting for availability, i.e., which factors are from the customer?s perspective necessary for the fulfilment of a supplier-customer agreement? Furthermore, the objective is to describe and analyse a supplier-customer relation in the Defence Industrial sphere.The present study has been carried out as a case study using an abductive approach. The thesis is based on a practical problem, i.e. which factors will be important to the customer when a contractor in the Defence Industry wants to increase its commitment of service, and how will their relationship change? The thesis is above all focused on generating knowledge that can lead to rapid and concrete measures and that can be used in the analysis of an increased industrial commitment but also as a case study of a problem of a more general nature in the Defence Industry.

When an error occurs in an IT system that is vital for the production of a major industry, the consequences can be great. To quickly identify and correct errors is important as a stop in a system can lead to a break in production, which is costly for the industry. Our task in this thesis has been to develop a system for ÅF that facilitates the debugging process of the system Paperline. The system's target audience is ÅF-call personnel that provides support for Paperline 24 hours a day if something goes wrong. The system consists of a Windows service, a database and a web application and is developed mainly with the techniques C#.NET, MVC 5, Google Charts, Javascript, HTML, CSS, and Entity Framework.

The Swedish bank Handelsbanken has, according to their own way of measuring, been more successful than a weighted average of their competitors during the last 38 years. They have also handled the recent financial crisis, as well as the one in the 1990´s, better than most other banks. This paper studies their management control system at branch level in order to identify the controls which have been enforced to ensure that a low risk level is retained in the lending. The controls that have been identified are; (1) A decentralized organization with the offices as profit centers where the manager has restrictions regarding risk level and the results are measured as K/I (cost/revenue). (2) The absence of bonuses and individual follow-up regarding performance measurement.

We were assigned to do this master thesis by Husqvarna AB who at the time for this thesis just had implemented a new material and production planning system called Replenishment system. Husqvarna AB wanted us to examine the effects of their new planning system to see if it was profitable or not. Husqvarna AB had for a time considered their delivery and supplier service to bee their biggest problem and they wanted to solve this problem by improving the communication with all involved actors in the logistic chain, which they hoped would result in a better mix of products in their warehouses. The aim of this report was therefor to analyze eventual effects for Husqvarna AB when changing from a traditional material- and production planing system to a more information intensive one. The result of this report showed effects on decreasing administrational routines and improved flexibility and lead-times.