Looking at the debate on nuclear power in Sweden, the issue of risk is central to understanding the difficulties in resolving differences between proponents and opponents. I sought to answer the research question: "how is the concept of risk constructed in the nuclear power debate in Sweden?" Four main aspects of risk construction were defined and investigated to identify differences between sides in the debate. Through a qualitative study of the debate and its actors I found clear differences in respect to all four aspects of risk construction. First, the perception of nuclear power as a "normal risk" is common among nuclear opponents in contrast to a largely probabilistic view among proponents.

Safety in the construction industry has become a question of top priority in recent years. Despite a massive investment of time, money and knowledge, the occur-rence of fatal accidents in Sweden alone is around one a month.The purpose of this study is therefore to improve the safety on the construction site. By an examination of the role of the safety agents and their cooperation with the construction workers and supervisors as well as examine how safety agents can improve safety on the construction site, which is the goal of the study.Four questions were formulated based on the purpose and the goal of the study.The methods used to answer the questions were a questionnaire survey, multiple interviews, a literature review and a document analysis.The report describes the safety agent?s role as a complex one with many different tasks. The role of the safety agents is regulated in the health and safety law, but it can sometimes be difficult to interpret and the agents can therefore interpret their role differently.

Work Environment problems on construction work sites are very extensive and discussed. The construction industry is one of the most dangerous industries in Sweden. The construction industry occupies about 290 000 employment (2009), and the investment was 250 billion SEK. This report will investigate the issues of the work environment and offer advice on how these can be measured and imporved. The study includes review and analyses of occupational injury statistics, interviews, inspections and audit and review of the literature.

Today?s construction buildings contain more advanced technologies than before. The development of newer and stricter regulations to the construction industry makes the door environment more and more complex.In large construction projects the door environment is held up as a major challenge to get to in a good way. It turned out after a discussion with one project manager and a site manager at NCC, that the door environment is difficult to get right in major construction projects and it often causes many error reports in to the aftermarket after that the final inspection is completed.Interviews have been done with key figures in the building process at NCC and Akademiska hus. A study on a university building for around 3500 students and with 300 workplaces was made.

During the 19th centaury Liverpool was an industrial city of great magnitude owing to the well-established communication and infrastructure in the area. During the 1950?s the industry decrease swiftly - and although Liverpool as a city gain interest as a result of the sensation of the Merseybeat and The Beatles - the reduction continued through the 70?s and during the 80?s the people of Liverpool suffered from great unemployment. Today Liverpool is a post-industrial city with a growing experience economy that mainly benefits from The Beatles tourism and the Merseybeat-era. The focus of these studies is the experience economy in Liverpool as a result of globalization and production in the late modernity.

The essay describes the bachelor project by Marie Hanås, in collaboration with Skälsö Arkitekter. Skälsö Arkitekter are currently developing an area in the north of Gotland, Bungenäs; previously home to lime stone quarries and military bases.The brief was to design a set of outdoor furniture to complement the new development. The main effort of the project was in designing furniture that would fit the environment visually but construction issues were a major secondary concern, to ensure the easiest possible manufacturing. A reference group of coastal house owners were interviewed, and their feedback, together with an analysis of functions, trends and target groups, were the base for the ideas.Of the five concepts presented, Skälsö Arkitekter chose one to develop further. This was done through sketches, models and 3D models and led to the final result which is lightweight furniture of Gotlandic pine wood with an industrial touch.

During my studies to become a guitar builder at Carl Malmsten CTD, I have found an interest in the construction of the classical guitar. I am fascinated by the simplicity of its construction. A simplicity that becomes more complex when you start to study it in detail.In my final thesis I will not try to explain this complexity. The subject is to investigate two different principles regarding its construction. I would like to find out if the sayings concerning one of the principles will yield a guitar with greater ability to produce volume and projection.At a close distance the difference between the guitar?s volumes is not to speak of, but a significant difference can be seen regarding one of the guitars ability to project its sound.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

Energy is today a very common topic, not only in Sweden but in the whole Europe. In EU they have given out a directive 2002/91/EG about buildings energy use and throw this they have forced their members to show how much energy their buildings use. In Sweden has the gouvernment established a law (SFS 2006:985) about energy declaration for buildings which demands that the building owner needs to show how much their buildings energy consumption are. Important to know is that this law doesn´t applies for industrial buildings.The report will show what the new law about energy declaration for buildings and appurtenant directions will mean for Riksbyggen. Also energy calculations will be done to be able to compare Riksbyggen buildings with the new law and directions.

When constructing a road the risk of emission of substances from the used materials to the surrounding environment has to be evaluated. The aim of this study is to present a proposal for how to evaluate the risk of contamination as a result of emission from the materials in a road construction. The study is based on literature studies, an inventory and a questionnaire that examines how experts in governmental agencies, industries and universities evaluate the risk of contamination. The inventory indicates that guidelines for evaluating the risk of emission from secondary materials in a road construction do not exist. The conclusions from the questionnaire are: that there is no common way to evaluate the risk of contamination as a result of emission from materials in the road construction, there is no uniform interpretation of the terms "minor" and "significant" risk of contamination and that the evaluation is subjective.

In industry applications, such as power supply plants, the issue of interaction between fluid and structure is always presented. More precisely, the fluid flow affects the structure by applying force(s) on it and vice versa. As a result, the structure can move (vibrate) or deform. A good understanding of this problem can help to design the system in term of safety, stability and efficiency.This project aims to optimize and test the Unicorn FSI solver from the FEniCS project [1] to simulate the interaction of fluid and structure in an experiment, which was carried out at Vattenfall Research and Development. The target is to improve the Unicorn FSI solver to cope with a real industrial problem.

This study aims to look at female executives? view of their leadership in the male-dominated construction industry. The study is  qualitative and focuses on the respondents' subjective perceptions. We have conducted six interviews with women in different companies whose positions within each company varied. Using theories of subjectivity, emotions, impression management and organizational structures, to support the analysis conducted, this study shows that there are obstacles for women in the industry, but it also shows that it  seems to be facing a brighter future.

The aim of this study was to get a deeper understanding of how employees at NCC Construction Sverige AB experience health promotion activities. The purpose was to identify and uncover the process of meaning constitution concerning health promotion within each subjective individual. To achieve this deeper understanding the participants were asked to answer a carefully formulated phenomenological question in a self-report. The received reports where analysed according to the method of Meaning Constitution Analysis. The result showed that both office workers and construction workers exclusively refer health promotion to bodily functions even though there where some differences in type of activity they focused.

The construction industry has been heavily criticized in the past few years for its development of productivity compared to the manufacturing industry. In 2009 the Social Care Center developed a report that treated och criticized different errors within the construction industry. For instance competence, construction errors and performance had showned bad results which had to be improved. A common sentence within the building industry is that ?every project is unique?. Today it?s common for a construction company to have costs for material and services which exceeds two-thirds of the total cost.

The usage possibilities of mobile platforms and smart phones are increasing rapidly as they provide support for better processors, sensors and communications capabilities. This has for many companies resulted in an increased interest to explore the possibilities of mobile platforms and how they can be integrated in various business areas. As the usage of mobile platforms in industrial applications is a new area, it is difficult for companies to estimate their potential, and what contributions the different platforms can give.This master thesis investigates the possibilities and limitations for the consultant firm Combitech when integrating mobile platforms and handheld devices in industrial applications. This is accomplished through a comparison between the platforms and by considering the possible areas of use for the mobile platforms based on experiences from companies and research in the area.For a company with the intent to deliver services that use mobile platforms, it is important to be able to combine expertise and resources to effectively attract customers. The mobile platforms will, if applied right, give great possibilities in industrial applications as a cost-effective alternative for both hardware and software solutions for businesses, which provides an opportunity to sell services to both established and new clients.