Sök:

Sökresultat:

2455 Uppsatser om Industrial construction - Sida 50 av 164

Utvärdering av metoder och modeller för att simulera växlingskomfort i entreprenadfordon

Good comfort for the driver of a construction machine is crucial. Gearshift comfort is an important part of the total comfort. Volvo Construction Equipment Components has a simulation environment of the powertrain, SimPow, which is implemented in Matlab/Simulink. SimPow is mostly used for simulation of control strategies and performance. In order to be able to study gearshifting comfort, Volvo has an interest in developing new models for SimPow.

Hårdgörning av Asp

Hårdgörning av trä syftar till att göra materialet hårdare. Detta går att åstadkomma genom komprimering, det komprimerade materialet tenderar dock att återgå mot sin ursprungsform då materialet utsätts för fukt om ingen låsning sker. Låsningen kan ske mekaniskt i en treskiktskonstruktion som motverkar träets fuktrörelser. Dessa skivor har dock visat sig vara instabila och tidigare försök har uppvisat deformationer i form av kupning. Denna undersökning syftar till att utreda förutsättningarna för att använda komprimerad asp samt att ta fram underlag för framtagning av en kommersiell produkt.Praktiska tester har genomförts för att studera hårdhet, återfjädring och densitet hos det komprimerade virket.

Bedömning av kunders uppfattningar och konsekvenser för strategisk utveckling :

This project has been created with the assistance of Fredells. Fredells is a Stockholm based company with a focus on the retail of building products. Fredells also produces prefab- or prefabricated products which are either completely or partially ready for assembly the moment they arrive to the building site. These prefab-products are primarily delivered to customers within the Stockholm region. The building industry is a conservative market where the incentive to changes has been relatively low compared to other industries.

Webbportal för logistik och orderhantering : Kapsch TrafficCom AB

This thesis is ordered by Peab Sweden AB Regional Jönköping and concerns of warranty inspections.The intention is to work out a basis, which show the most common complaints is the warranty inspections, and make a small analysis on what causes them to be. The report also presents possible solutions to prevent the occurrence of defects. It also covers the issue of how the client looks at Peabs way to overcome the objections of warranty inspections. The report has the following issues:?What are the most common errors observed during the warranty inspection??What are the causes of complaints??What can be done to reduce the number of complaints??How the customer thinks that the complaints be addressed?Twenty-five Guarantee survey records from the projects Peab has done in recent years has been the starting point for the investigation.

Portning till ARM Cortex M3 och prestandajämförelse

The Anybus CompactCom modules are today using the Anybus NP30 processor. These modules are used for communication between industrial machines and larger network protocols. The communication loads on these systems are increasing every day and the limiting factor for the system is the processor.HMS, the company that develops the Anybus CompactCom, has shown interest for a benchmark test between the old processor and a new processor, ARM Cortex-M3. This project includes that benchmark. To be able to get results that reflect reality a test environment was created to simulate Anybus CompactCom conditions.

Efterfrågan av grova sågade dimensioner och hyvlade produkter bland Wallnäs AB:s kunder : en marknadsundersökning

The purpose of this thesis is to study whether there is a demand for sawn wood products of large dimensions and planed goods among Wallnäs AB:s customers. The thesis consist of two main parts, one survey among Wallnäs present customers and another one which purpose is to increase Wallnäs customer base. Finally there is a chapter that describes what properties the raw material has to have in order to produce the demanded products. The survey to the present customers was conducted through a questioner. A sample of those who stated an interest for either sawn wood products of large dimensions or planed goods, were later contacted for a telephone interview. To reach out to new customers, relevant companies has been identified through the Swedish Trade Councils data base and through the member list of the Timber Trade Federation.

Prestation och belöning : En studie av meningsfullheten i den svenska industri- och hantverksbranschen.

Abstract: The purpose of this study was to examine the Swedish industry- and craftmanship trade, specifically the relationship between effort and reward and how it affects the meaningfulness during labour hours. Also, what are the possible effects on production efficiency as a whole? Discussed and analyzed through empirics and previous research.38 workers filled out a survey and two interviews were conducted to get a more analytic depth to the data.The results showed that there is little to no reward for high effort during labour hours on the evaluated workplaces, combined with low commitment and meaningfullness. My conclusions are that more ways of effort-based rewards would likely have a positive effect on meaningfulness and thereby the production as a whole. I also show that the theses of Karl Marx are still plausible and relevant in modern day industrial- and craftsmanship trades in capitalist countries..

Gabioner - Ett alternativ vid vägbanksbygge i lösa leror

The use of gabions means a reduced amount of filling material in the road section and a more narrow construction. Also the use of limestone cement columns can be reduced. All together this results in lower costs. The columns stand for about 55% of the total costs for the road. If gabions are used you can reduce the total costs with over 10%..

Medarbetaravtal vid motorproduktionen i Skövde - inverkan på anställningsrätten, förläggning av arbetstiden, arbetstagarorganisationernas inflytande, samt arbetstagares arbetsskyldighet

White- and blue collar workers traditionally belong to different unions and, therefore, are covered by different collective agreements. Collective agreements for different employee categories create internal divisions, which mean that white collar workers are not obliged to do work that falls under a blue collar agreement and reversed. Historically the difference between white- and blue collar work has been fairly sharp and so has the difference between collective agreements. Due to the continuous development of technology white- and blue collar work within production has become less clear. This has resulted in an increasing amount of disagreements regarding what collective agreement should apply and whether the employee is obliged to perform different work tasks.

De blir fria i tanken : En kvalitativ studie om pedagogers tankar om pedagogisk dokumentation

This MA thesis analyzes how the protagonists and the narrative structure relates to ?the Child? as a linguistic/cultural construction in Mare Kandre?s early authorship (1984-1991). A thematic of children portraits defines this period of Kandre?s writing, which consits of the following works: In a Different Country (1984), The Annunciation (1986), Bübin?s Kid (1987), The Burning Tree (1988) and Aliide, Aliide (1991).Linguistic components, such as the word ?child?, the name ?Kid? and a reconstruction of the concept of childhood, holds an actuate position in these narratives when they first appear in direct relation to the protagonists. This suggests how generally accepted categories and concepts consciously are at work in Kandre?s writings.

Att konstruera för tillverkning : En arbetsmodell för ett enstyckskonstruerande företag

SammanfattningDynaMate AB, som är ägare av DynaMate Industrial Services, är ett fristående helägt dotterbolagtill Scania CV AB. Bolaget startade sin verksamhet 1993 och då inledningsvis som enunderhållsavdelning inom och åt Scania. Under första halvåret av 2001 ombolagiserades dockDynaMate AB för att kunna erbjuda produktionsstöd även till andra kunder. Under 2009 bildades såDynaMate Industrial Services AB (DIS), där detta företag idag erbjuder specialkompetens inomautomation, el och mekanik. Med stöd av företagets kompetenser och erfarenhet av produktionsstödlöser de kundens problem från idé till färdig maskin.I Scanias regi har DynaMates uppdrag oftast vilat på enskilda konstruktörer, som då agerat bådeprojektledare, genomförare och slutförare.

En utredning av arbetsmiljöarbetet på NCC Östergötland

It is very important to get the work environment into the daily work, not least in the construction industry. The purpose of this report is to identify how the process with work environment works. It will identify and clarify the problems that exist.In my work, I have studied how the NCC Östergötland is working with these issues. The focus of the report is on my interview and survey questions. My conclusion and discussion is therefore based on the answers I collected and compared.

Mining for culture : performance arts center Ställberg?s Mine

This degree project summarizes five years of education at the landscape architecture program at the Swedish University of Agriculture Sciences, SLU, Alnarp and the School of architecture at Royal Institute of Technology, KTH, Stockholm. The project has been carried out by Lovisa Berg and Per Crona in collaboration with DRIFT Scenkonst. This master project is based on the ongoing transformation of a former mining site in Ställberg, Bergslagen situated in central Sweden. The organization DRIFT is in the process of recreating to former industrial mining site as a green cultural center. Their field of artistic examination concerns existential questions connected to the site. The aim is to offer a place for both performing and experiencing contemporary performing arts in Bergslagen. Our objective is to contribute to the growth of the performing arts project and to demonstrate in concrete terms how a conversion of a mining area can be completed, while taking into account both its history and its new function.

Transformativt ledarskap - en förutsättning för produktivt teamklimat och egeneffektivitet?

In the faster growing pace of changes and competition in the global economy, factors promoting group effectiveness are of interest. How do components of leadershipstyle, especially transformational, team climate and selfefficacy correlate? To answer this question 3 questionnaires regarding leadershipstyle (MLQ), team climate (TCI-Short) and selfefficacy (self developed) were distributed to employees of a Swedish installation company (108 participants). Moderate positive correlations were found between climate and selfefficacy and between varying elements of leadership and selfefficacy. The leadership behaviour Contingent Reward correlated moderately with all climate dimensions and strongly with selfefficay.

Barnperspektiv, betyder barnrelaterat? : En kritisk diskursanalys av barnperspektivet i tjugosex kulturmyndigheters och -institutioners strategier fo?r barn- och ungaverksamhet (2012-2014)

Today the right of the child to participate freely in cultural life and the arts is a goal on the political agenda. As a consequence, in 2011, twenty-six government agencies and institutions of culture were assigned to formulate strategies for activities for children and young people. These strategies are the empirical basis of this thesis. The aim of the study is to elaborate and problematize three issues concerning children?s culture from the viewpoint of a social constructionist understanding of childhood as constructed in various, often political, practices.

<- Föregående sida 50 Nästa sida ->