Sök:

Sökresultat:

2455 Uppsatser om Industrial construction - Sida 49 av 164

Hello Skandia: Om kulturen på intranätet

Corporate spending on information technology is persistently increasing and a majority of companies are currently employing an intranet. Intranets have implications for internal communication but are also instruments for the dissemination of corporate culture. Existing research on intranets and corporate culture is limited to Swedish organizations within the industrial or IT-sector and to foreign companies. The purpose of this study is to understand how or if corporate culture can be embedded into an intranet. Specifically, this study addresses the research question: How is corporate culture communicated via an intranet in a Swedish service-sector company? We perform a qualitative case study and find that communication on intranets is still characterized by a traditional top down approach.

Mek Stans 07

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

En kartl?ggning av inv?ndiga f?nsterluckors utbredning och konstruktion

Interior window shutters can be found in historical buildings, but they are an uncommon occurrence in modern buildings. In modern contemporary construction, large glass panels are often the ideal because of increased light inflow and for architectural purposes. However, this can generate several negative effects, such as increased energy loss, lack of privacy and high sunlight penetration. Problems that window shutters could have accommodated historically. This thesis identifies a lack of knowledge about interior window shutters in the Swedish building stock.

Ämnestransport med grundvatten i hydrogeologiska typmiljöer

Certain types of waste, e.g. bottom ash originating from municipal solid waste incineration (MSWI bottom ash) can be used as road construction materials. A potential problem is the possibility of substances leaching out of the road and spreading in the surrounding groundwater.The aim of this master?s thesis is to conclude whether hydrogeological type settings can be employed to, based on local conditions, provide an estimate of the probable spreading of these substances in the surrounding groundwater, and whether certain types of soils can be identified as being less suitable for the localization of a MSWI bottom ash road. A hydrogeological type setting is defined as a mappable unit with similar hydrogeological properties.

"Månntro hon är homo?" : Om lesbiska kvinnors identitetsformering och livsvillkor 1950-1965

The construction of an identity among lesbian women during 1950-­?1965 is in focus in this master ?s thesis. My starting point is that identity, such as lesbian or any other identity, is formed in relation to other people and groups, as well as society. This thesis will also examine how lesbian women met and formed bonds with like-­minded, and whether these aspects changed, during the defined time period. The empirics is made up by letters written by women to Riksfo?rbundet fo?r sexuellt likabera?ttigande (a Swedish organisation for lesbian and gays) as well as an interview with two lesbian women who were born in 1938 and 1940.

BYGGBRANSCHENS MILJÖUTMANING ENLIGT PLATSCHEFER, ARBETSLEDARE OCH YRKESARBETARE: EN INTERVJUSTUDIE GJORD PÅ BYGG- OCH FASTIGHETSUTVECKLINGSBOLAGET NCC CONSTRUCTION SVERIGE AB

Byggsektorn står för en stor del av det totala avfallet i Sverige och står därmed inför stora miljöutmaningar. Däribland finns NCC Construction Sverige (nedan kallat NCC), Sveriges tredje största byggföretag med cirka 10 000 anställda. På varje bygg- eller anläggningsarbetsplats på NCC upprättas en miljöplan där olika krav omhändertas: lagkrav, lokala föreskrifter, beställarkrav samt interna krav.Studien genomfördes i samband med författarens praktik på NCC i Göteborg, avdelning Anläggning, med syftet att synliggöra yrkesarbetare, arbetsledare och platschefers syn på miljöarbetet på företaget - idag och historiskt. Totalt genomfördes 8 anonyma personintervjuer; två platschefer, två arbetsledare och fyra yrkesarbetare intervjuades under hösten 2014.Studien visade att ekonomiska incitament är viktiga för att miljöarbetet ska kännas berättigat för dem som utför det - framför allt för skeptikerna. Pappersbördan är hög och vissa anser att miljöarbetet enbart är en pappersprodukt utan egentlig mening.

Köldbryggor och energiförluster. En studie om energiförluster genom balkonginfästningar och deras betydelse för byggnadens totala energibehov

In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.

ZigBee-teknikens möjligheter att trådlöst överföra EKG-signaler

In many clinical applications, it is desirable to transmit sensor information wireless. In earlier research, investigation transmit ECG signal using Bluetooth, was performed. However, when Bluetooth has some drawbacks it is of interest to investigate alternative methods, one such method is ZigBee. Bluetooth has higher data rate speed (1Mbps) than ZigBee (250kbps). However, Bluetooth consumes more power.

Reformation of the credit rating industry - Is there a need?

The credit rating industry is a complex and fascinating industry. Its history stretches back more than 150 years and has gradually increased in importance. During its history the dynamics of the industry have changed. The extended-principal-agent model was developed by synthesizing different principal-agent-relationships into one model. This model provides a holistic understanding of the credit rating industry and illustrates the interdependence between the different relationships.

Maskuliniteter : Genusnormernas inverkan på individers sociala förutsättningar

The purpose of the thesis Masculinities ? Gender and its Impact on the Social conditions of individuals is to perform a critical study of how gendered norms influence the social conditions of individuals. This has been done by a problematization and the attempt to answer the question of how the hegemonical masculinity can be analyzed as a discourse, and how the structural aspects of this discourse inflict on the social conditions of masculinities.The question was divided into the analytical themes: the boarders of the discourse, the institutionalization of the discourse, the actuation of the discourse and the agents of the discourse. The theoretical frame is constituted by the theory of discourse by Michel Foucault, the theory of the hegemonical masculinity by R.W. Connell and a subversive identity theory by Judith Butler.

Igloo

This degree project has been performed along with Classic Garden in Gothenburg andBallongfirman Far & Flyg in Stockholm. Together we have developed a sun- wind- andrain protection. The protection is permanently assembled and mainly intended for publicenvironments as restaurants and outdoor cafés.The design on the sun protection was already done so our task has been to develop theconstruction and to build a prototype in scale 1:4 and one in scale 1:1. The look of thesun protection is approximately as the name implies, equal an igloo. The lamellae aregoing to fold out in different steps all the way down to the ground and the both sides willbe independently of each other.The first stage in the project was to develop differently principle proposal on how thefunction will work when folding in and out the protection.

Parametriserad 3D-modell av cyklon : Parametrisering av en 3D-modell av ett cyklonfilter i SolidWorks för snabb framtagning av nya konstruktioner till Outotec Skellefteå

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.

"Challenges when implementing standardized and processes within a customer service unit"

 Abstract  Interest in Lean grows and spreads to the public from industrial and service sectors. Lean is currently used in administrative processes and it is called Administration but can administration be Lean? The aim of our study is to develop a useful model for a successful implementation of Lean Administration by using various scientific articles, books and information from the case study.The part of the purpose is to: ? Identify critical success factors that arise? Identify the challenges arising from the implementation of Lean Administration.We have studied a Division within Distribution at GE Healthcare in Uppsala. The model that we have developed provides challenges and success factors for a successful implementation.In order to succeed in implementation, a culture that promotes continuous improvement must exist in the organization. A key success factor is to understand Lean Administrations structure and principles.

Fuktens påverkan på utegipsskivor under byggtiden

This thesis is a study of humidity at Knauf Danogips external plasterboard. The study is performed at the building project Kv. Maskinen in Jönköping in cooperation with NCC Construction AB and Knauf Danogips. The measuring was performed during five winter/spring months to see how the weather influenced the plasterboard.The measuring was performed at a small two-storied building and a larger fourstoried building. From the buildings` placement were a couple of measuring dots selected and to get a good result was the dots located in the four cardinal points.

Emotionella upplevelser och emotionsreglering i samband med en nedskärningsprocess

The aim of this study was to investigate emotions and emotion regulation of a downsizing in an industrial company. The sample consisted of persons who had experienced a downsizing but have kept the employment, within a same position or being transferred to another one. Data consisted of two focus group interviews, analysed by an inductive thematic analysis. The results have indicated that emotional reactions changed over time as well the emotional regulation did during the different phases. The groups differed in emotional reaction related to the time of decision regarding the retention of employment.

<- Föregående sida 49 Nästa sida ->