This thesis aims to develop proposals and models for a modular electronics construction to a future D250S Dual battery charger. The aim also includes investigation of possibilities to use some of Texas Instruments C2000 microprocessors. The reason for this is that CTEK SWEDEN AB wants to renew the present D250S Dual battery charger and lower the manufacturing costs. The thesis work has involved gathering theoretical facts for the development of a design on the modular electronic construction, the choice on which microprocessor to use, the choice of electronic components and facts about peripheral equipment to the D250S Dual. With the theoretical there has been developed different solutions to the proposed hardware and software solutions with comparisons in aspects of positive and negative.

The construction business is one of the most accident prone businesses in Sweden. In order to make it safer it?s vital that all employees of a company report all accidents and incidents that occur. This report intends through qualitative interviews, to analyze the knowledge and attitude towards incident reporting among the employees of the Swedish construction contractor JM.The goal of the thesis work is to hopefully contribute to an increase of employees? awareness on those issues.

The bulk of the research within the field of media and communication is concentrated at theforefront of development, studies focus on modern companies and modern communication.However, many people work in the industry, where the conditions for communication are partly different. The aim of this study is to explore the possibilities for internal communication that the employees have at the base industrial company of Billerud Gruvön, Sweden. How important do they feel that communication is? Can the internal communication within Gruvön be described as modern, where dialogue between the staff is possible, or as orders from the top down to the bottom of the hierarchal structure?These are our research questions:Which channels are used for communication within Gruvön, and how are they used?How important do the employees deem the internal communication to be?Can the communication within a hierarchal industrial company such as Gruvön be described as modern, where dialogue is at the center, or does the communication consist basically on orders from the top down to the bottom of the chain?Our research is based on the following theories: Communication, Organizational communication, Internal communication and Organizational culture. We have looked to earlier research such as the doctorates of Simonsson (2002) and Johansson (2003) to further our understanding.The methods used are interviews with operators, middle management and the informationofficer at Gruvön.

Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

Lagen om skydd mot olyckor ställer krav på att företag med hög riskbild gällande brand skall genomföra riskanalyser för sin verksamhet. Med detta som grund har i detta arbete genomförts en riskanalys med åtgärdsförslag i syfte att bidra med underlag för att förbättra brandskyddet i Norrmalmsverkstaden i Finspång. Norrmalmsverkstaden ägs och nyttjas av Siemens Industrial Turbomachinery AB [SIT AB] som tillverkar gas- och ångturbiner. Turbiner till ett försäljningsvärde av flera hundra miljoner kronor monteras och finns uppställda i Norrmalmsverkstaden. En brand där turbiner och övrigt material i lokalen påverkas skulle få stora ekonomiska konsekvenser för SIT AB.

The aim of this Masters thesis is to explore the image of the librarian from three groups: librarians, researchers and directors of staff from industrial companies. The purpose was also to study the image of the future librarian as the Swedish School of Library and Information Science at the University College of Borås introduces it. As my theoretical framework I used communication theories and marketing theories. I searched answers to the following questions: - Is there any resemblance at all between the common stereotypes of the librarian and the images given by the participants of the survey? - How do the librarians view themselves? - What is the image of the librarian among the researchers who use the services of the library? - What is the image of the librarian among the directors of staff from the industrial companies? - What is the image of the librarian given by an educational institution during the basic education? I contacted the participants and asked them to draw a picture of a librarian and write a short text about the picture.

A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

How do we match our education with the needs of the construction line of business and the requirementsof the Swedish National Agency for education? Is there something that we have to change?In this study I have asked our former students about their opinion of our education and I have also asked them to give me their view on what a good teacher is like. I have been able to benefit a lot from their answers in my efforts to be that good teacher. This survey took place at Facebook.The answers showed that we carry on a piece of solid workmanship. But you can always improve, try harder.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

Every year more than 6000 thefts, to a value of 1.5 billion SEK, are reportedwithin the Swedish building trade. Plus all the indirect costs of having theconstruction site standing still.SafeTool is a newly started company that will try to prevent this problem witha modern technology solution.The key to SafeTool?s solution is RFID ? Radio Frequency Identification ? andthe solution looks like this;All tools are stored in a container on the construction site. Every tool isequipped with a RFID-tag that uniquely identifies the tool. With antennas in thecontainer it is possible to detect when a tool is leaving the container and whenit comes back.

Denna rapport ger en bild av vilka olika saker byggherrar i Sverigeanvänder sig av idag för att öka den sociala hållbarheten. De projektsom studerats är Bygga om Dialogen i Malmö, Älvstaden i Göteborg,Vivalla i Örebro och föreningen Byggemenskap.Genom att intervjua en person från varje område studeras likheteroch skillnader i hur man arbetat med den sociala hållbarheten vidbyggnation. I Malmö och Örebro studeras arbetet med att öka densociala hållbarheten vid renoveringsobjekt, hur får de hela områdensom länge haft ett dåligt rykte att bli socialt hållbara där stort fokusligger på att anställa långtidsarbetslösa.I Göteborg och i föreningen Byggemenskap fokuserar man på attföra in den sociala hållbarheten vid nybyggnation och hur vi kan byggahyresrätter som har en lägre hyra än nybyggda lägenheter i dagslägethar..

Detta examensarbete inom lean produktion anpassar, tillämpar och utvecklar metoden för värdeflödeskartläggning på Siemens Industrial Turbomachinery AB:s tillverkning av mellanväggar. Företaget ser en ökad efterfrågan på ångturbiner, där mellanväggar är ingående komponenter. Produktionen av mellanväggar sker idag i funktionell verkstad där mellanväggen genomgår drygt 20 operationer. Värdeflödeskartläggningen ska presentera ett förbättrat produktionssystem för mellanväggar som kan möta den prognostiseradeefterfrågan.Metoden för värdeflödeskartläggning har sitt ursprung hos Toyota och bilindustrin. Examensarbetet utvecklar metoden för kundorderstyrd lågvolymproduktion och presenterar en metodhandbok för leanimplementatörer.

This report presents suggestions and recommendations on how to convert an old industrial building, built in 1958, to an office hotel. One of the main criteria was that the floor plan should be flexible. The building is situated at Jonsereds Fabriker and the study was conducted for Hantverkslokaler i Göteborg AB, the estate owner.The survey is initiated with study visits at various office hotels, together with studies of literature regarding office planning. One conclusion from the study visits is that meeting-places, where the different companies can meet and exchange ideas and services, are important. Another one, and probably the most important parameter when planning offices is that they should have windows.

Background: Today there are high claims on organizations to show a positive economic view. To satisfy the demands and expectations from interested parties it is very important to carefully plan the companies tied up capital and cash flows. Purpose: The purpose with the thesis is to describe what actions organizations take to resolve the conflict between showing a positive cash flow and the need to tie up capital.The purpose is also to explain the different factors that must be considered when making decisions regarding cash flow and capital tied up. Method: A qualitative study of the actions and factors wich must be considered when decisions in swedish construction companies are made regarding cash flow and capital tied up. Results: A model of the factors and actions that affect cash flow and capital tied up in projects.