Quality assurance of construction projects and create effective ways of working, is intoday's pressed position, major objectives for building contractor companies. This thesis is an attempt to see if it is possible to achieve these goals with the new modern tool iPad.The author of this thesis has during the latter half of his one year practice work in Uppsala for the Swedish building construction company NCC Construction Sverige AB, conducted a study on the possibility of using the iPad on an construction site. This has been done with active field studies in which applications have been tested and also the supervisors receptive. The usability of the iPad has always been in focus since it is important that the applications are easy to use and easy to learn.The results of the work, as presented in this report, points at opportunities in efficiency if the iPad is introduced and used on construction site. There are many useful applications for the iPad, and with a system that can handle the synchronization between the iPad and the computer, the workflow will be streamlined significantly..

The purpose of this thesis is to examine how the working method partnering has been welcomed in the Swedish construction company NCC and find possible explanations to this. The theoretical background used to understand and discuss our findings mainly builds on value and network dynamics. The empirical study is of a qualitative nature and builds upon 13 semi-structured interviews and the participation in a two-day start up workshop with 21 representatives from involved parties. The study shows that partnering has been positively accepted at NCC. Possible explanations for this can be found in the contrast the method represents to the traditional way of working within the construction industry.

The aim of this study was to investigate and compare the availability of construction materials affect children's constructions and play. Observations were made when the children were allowed to play and build with very little and much of the material play-doh dough in preschool. The study is aimed at children aged 3 ? 5 years. Interviews were also conducted with educators in departments where the children spent time to give support to this study.The result shows that the children create as many designs of any material amount.

This thesis is a critical discourse analysis of the vision of Malmös contemporary urban development. By analysing official documents produced by Malmö municipality our aim is to make discursive and sociolcultural practices in the constitution and construction of the city visible and problematicize them. To do so we use critical discourse analysis and theories on Urban Studies. Malmö is a city historically labeld as a ?labour- city?, with heavy industry as its main labourmarket.

The purpose of this thesis was to examine how the build-up of customer relations can be characterized at the end of the industrial selling process and how companies engage their cross-functional selling teams into this relationship building effort. Through a case study of Omega, a multinational company engaged in the selling of products of an industrial character, it was revealed that the build-up and maintaining of the customer relationship is of acute importance, as it presents the company with a window of opportunities. Through its relationship with the customer the company can be able to sell other products, which are related to the original purchase made by the customer. For the company?s competitors the established relationship might also serve as a barrier when attempting to enter the market or increase market share.

Study objects: JM, Folkhem and ABB.Purpose: The purpose with this study are to examine how the supplier relations are in the construction branch and compare that result with how the supplier relations are for ABB a production company.Theoretical: The theoretical chapter illustrates important and relevant parts of supplier relations, purchasing and supplier strategies to give good overview. The theoretical review will combine information from different fields to consent with the research problem.Method: A case study has been made on three different companies, one of the companies was active in the production industry the other two were active in the construction industry. Data was mainly collected through semi structured interviews on each of the three companies.Conclusions: The size of the company decided which point of view the company had on purchasing, traditional or modern view. All three companies had a centralized purchasing organization but the construction firms were more decentralized than the production company. The reason was that the construction firms were dependent with more flexibility when every construction project is unique..

In Sweden there are 299 000 working in the construction industry. The construction industry is one of the industries where most accidents occur every year. During the last ten years there have been 111 death accidents in the construction industry and 48 of them were falling accidents. That means, in average, one death accident every month.Falling accidents gives serious injuries to the persons who are affected by them. It is anticipated that this report will investigate the factors beyond the falling accidents and also to present proposals that can decrease the number of falling accidents in the future.To secure a healthy and safe construction site it is of great importance that both the employers and the employees cooperate towards the same goal.

Virtual Design and Construction (VDC) is currently used more and more within construction design and planning as well as construction as a streamlining tool aiming to improve communication and decrease the number of construction defects. VDC is constantly developing, but what comes next? The augmented reality (AR) technology is currently not used within construction in Sweden but should be considered as the next step in line regarding the integration of reality and digital information. Using this technology design can become reality even before it?s actually built.The purpose of this study has been to carry out an inventory of the existing AR technology and its shortcomings, and also to identify possible applications within the construction phase.

En historisk fallstudie om strukturförändringar i Matsushita Electric Industrial Co, Ltd under 1933- 2003..

A large cost at the construction sites today is the labour cost of the workers. But unfortunately the worker potential is not used to full. It is not unusual to take into a count with a work-­?place-­?additional-­?time of 50% in some cases. By increasing the workers' motivation and responsibility for their tasks may reduce the time considerably, which also increases the potential for greater gains in construction projects.By using the situational leadership may the workers level of maturity develop entirely.

When constructing an industrial- or hall building, the most common framework materials thatis used are wood, steel or concrete. Due to an assignment from Byggnadstekniska Byrån ABhas a document been created that makes it possible to investigate how the final costs is af-fected by gapes in between elements and which used foundation. And this with steel as thematerial. The purpose with this essay is to investigate which is the most well fitted materialwhen constructing an industrial- or hall building wood, steel or concrete. Information aboutthe different materials has been collected by litterateurs and by different internet pages.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

Today, there are few industries left in our cities. Industrial areas thatare located in urban settings close to water or city centers are oftenreplaced by housing. In my thesis I want to explore how such industrialsite located in an urban setting can be transformed into anindustrial park where the industrial structures are saved. By approachingthis type of environment in a positive manner, I wish tohighlight the potential aesthetic and functional value in the existingindustrial structure. Through the transformation and design of anexisting industrial site I will convey the previous use and history ofthe place.The wastewater treatment plant, Kungsängsverket, is located in thedistrict of Kungsängen in the southern part of Uppsala.

The thesis has been made for NCC Teknik in Gothenburg. The NCC Corporation is one of the largest leading companies in Scandinavia within the construction industry. NCC is active throughout the whole construction process, where one part is to carry out soil investigations prior the construction of various buildings, for example residential buildings. NCC Technology wants to visualize the samples taken at the construction sites in 3D for clients, authorities and also internally to show in a simple and understandable way how contamination is spread out in the soil.The thesis includes the area of Limhamns läge in Malmö, previously an industrial area. The area has previously included a concrete factory and the contamination from that factory has lingered in the soil.

This diploma work was conducted in collaboration with the Swedish civil engineeringconstruction company Skanska Construction in Stockholm. Their interest is todevelop a number of type approved form constructions which can be used during theconstruction of concrete walls. Skanska focuses on improving safety on their projectsand both supervisors and workers have a need for approved form constructions inthe current situation.The study is focused on safety and the purpose is to facilitate the preparation beforethe form work can begin. By studying the literature of the subject and conductinterviews with employees at Skanska Construction, the understanding of the issueand knowledge will be increased.Literature studies, interviews together with production and design have been thebasis for a successful study. The work has resulted in three types of approved formconstructions to Skanska Construction and the drawings can be used of employees atthe company.