In motorsports competition, safety reasons require that the vehicle is equipped with some form of protective roll cage. The roll cage should withstand the forces involved in a collision to protect the driver and the co-driver from the vehicle body deformation. The roll cage also works to protect the vehicle from excessive deformations to more easily make any repairs afterwards. For the roll cage to be certified and approved for motorsports competition, it requires that the cage is built after one of the recommended options. One of those options is to design the roll cage like a cross-construction at the driver and co-driver doors.

This is a discourse analysis concerning the visions for Malmö's future. Three concepts are studied to see which meaning these are given in the Malmö context. The studied concepts are ? development (utveckling), industry (näringsliv) and citizen (befolkning).The meanings of these concepts are studied against a backdrop of theories of inclusion/exclusion in general and inclusion/exclusion in the city more specific. Michael Foucault´s notion of a discourse which stigmatizes those not following a behaviour which is defined as being right and normal is central to this.

When building large buildings, such as compartment buildings, there is a number of deliveries arriving on the construction site daily. In order to receive these deliveries without disturbing the rest of the work going on JM often books a fixed unloading time. When doing that they can be prepared when the delivery arrives. Making sure there is a suitable unloading area, someone to meet the delivery and when needed proper machines, such as a tractor or a crane, to help unload bigger deliveries. The person receiving the delivery is supposed to make an acceptance control where they check the delivered goods making sure nothing has been damaged in transport and that they have received what they were supposed to receive.

 This report is an evaluation of Peab's purchase and call-off system, PIA.PIA is used to order goods for Peab's construction sites. The background to the work is that users of the system have understood the system cumbersome to use when purchasing goods for construction sites. The evaluation was carried out by the interviews and tests with users of the program, in this case, supervisors and site managers at the company. Ten users of the system were interviewed and eleven people have carried out a test order.The focus is primarily on the test order that users have implemented, which has been clocked and analyzed for time and cost. The evaluation is also a user analysis concerning how the users perceive the program, mainly in terms of usability, functionality and benefits.The result of this report shows that PIA is economically profitable to use for the purchase of goods for construction sites.

The web sites of libraries are to a large extent their public face and to help market their services, the web sites must have interesting and regularly renewed content. They must also be visually attractive and easily used, and thus be well structured and have a well functioning navigational system. The web masters' awareness of the ability of web sites to attract users to the site and also to the library, as well as their knowledge of suitable content and site construction, is crucial for how successful the web site actually is at marketing the library. The research question is: How do the studied web sites function as marketing sources and service providers for the libraries, and are the web masters aware of the importance of the web site? The purpose is to investigate how the library personnel looks upon the web site as a possible way to increase the popularity of the library among the public, and to study the construction and content of the library web sites to find out how well these serve their purpose.

Statistik har visat att byggbranschens byggnationskostnader i Sverige har ökat de senaste åren. Dessa kostnader beror enligt Josephson & Saukkorippi på kvalitetsproblem och kostnader för omprojektering, samt att det i nuläget görs aktiviteter som inte tillför något kundvärde. Ett arbetsmoment som idag är en viktig del hos många byggföretag är arbetsberedning. Syftet med arbetsberedningen är att hitta den optimala metoden att utföra ett moment på. Grunden till uppslaget är att Peab anser att det råder brister i deras nuvarande arbetsberedning. Intervjuer och enkätundersökning har gjorts för att kartlägga eventuella brister i Peabs arbetsberedning samt deras synsätt på Lean..

The last two decades have changed the society from the Industrial Age to the Information Age. The technological development, especially in IT, has caused a ?Revolution in Military Affairs?. However; how big are the changes RMA will give, or will it even change the foundation of the Art of War and if so, in what way?RMA has three cornerstones DBA, DS and PE all closely integrated in an NCW-concept.

This report aims to suggest recommendations that will increase the efficien¬cy in theconstruction process of a construction project. Through interviews, studies of budgetcalculations and examples given by the project management at the construction sightsan understanding of some complications have been gained. These complications havebeen tracked back in an attempt to find the source of the problem, and at the end ofthe report some suggestions have been presented with the pur-pose of preventingthese complications. Through the interviews it is suggested that many complications re-late to lack ofcommunication and motivation due to poor planning be-fore and during theconstruction process, a suggestion that is supported by the study of the budgetcalculations. The examples from the project management also points out someshortages in planning, but also coordi-nation related complications due to lack ofcommunication. To prevent these problems the recommendations suggested at the end of thisreport aims to improve the planning process through a properly fulfilledwalkthrough-planning of all of the construction activi¬ties during the time needed todo so. It is also suggested that the company uses experience from previous projects inorder to reduce costs, and that the qualifications of the employees is being appliedwhere it is needed.

Denna studie syftar till att identifiera hur valet av prioriterad leverantör sker vid köp av komponentdelar hos stora företag inom den svenska tillverkningsindustrin. Rapporten är avgränsad till komponenter som är kan anses vara kritiska ur försörjningssynpunkt för inköparen. Genom att studera vilka urvalskriterier de berörda företagen använder sig av men även hur köpprocessen och köpbeslutsgruppens sammansättning ser ut i praktiken, har empirin jämförts med de akademiska modeller och teorier som finns på området. Intervjuer har genomförts hos fyra stora tillverkande företag i Sverige som alla har tusentals anställda världen över. Fallföretagen verkar inom branscher såsom ventilationsteknik, vitvaror, industriella verktyg och tillämpningar samt fordonskrockskydd.

An investigation into the industrial and economic conditions concerning the production, distribution and showing of what the contemporary hegemonic entertainment industry labels independent film..

Choosing a new plastic material for a container includes several different steps. In this case,the Finnish company Hackman needed a new type of packaging material for theircutlery- and kitchentool series »Hackman tools«. The project was carried out in cooperationwith the design agency Ytterborn & Fuentes, which has Hackman as a client.Several different demands were put on the material in order to fulfill as many of the clientswishes as possible. The most urgent problem with the existing container was the difficultysfor the customer to clearly see the contents in the container. Because of this problemthe customer tried to open the container in the shop.

The aim of this thesis is to describe the customer?s attitudes toward the contracting for availability, i.e., which factors are from the customer?s perspective necessary for the fulfilment of a supplier-customer agreement? Furthermore, the objective is to describe and analyse a supplier-customer relation in the Defence Industrial sphere.The present study has been carried out as a case study using an abductive approach. The thesis is based on a practical problem, i.e. which factors will be important to the customer when a contractor in the Defence Industry wants to increase its commitment of service, and how will their relationship change? The thesis is above all focused on generating knowledge that can lead to rapid and concrete measures and that can be used in the analysis of an increased industrial commitment but also as a case study of a problem of a more general nature in the Defence Industry.

Most of today?s concrete structures that are built on site are mainly constructed in a traditional fashion with a lot of artisanal operations. One step towards industrializing the in-situ construction of concrete is to use prefabricated reinforcement. Through this method there can be a lot of savings when each bar doesn?t have to be placed and fixed separately on site.

Our Bachelor?s Thesies has been performed in co-operation with Cellplast Direkt AB inLaholm. Our task was to develop a construction that cuts gussets to ceiling disposition as isused to isolation.Our goal with our construction was to increase the degree of automation so that theproductivity increased and also meet the market which is getting tougher and tougher due tothe future business cycle.Cellplast Direkt gave us free hands in order to enable new ideas. A pair different principleproposal was developed and prepared to a final structure.The Bachelor?s Thesies resulted in one PLC - governed machine with three engines that runthree different moves, wich does that the degree of automation increases and the risk forerrors decreases.We have developed a complete production bases to Cellplast Direkt and our hope is that thecompany comes to produce the machine in the future..

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.