People who live in northern part of the world spend much more time Indoors than those who live in warmer countries. In addition that home should be safe, it should also protect one against heat, cold, sunlight and pollution. The Indoor environment is affected by installations, material and how the building is formed. Those anomalies that are visible, felt or smelled can be noticed and be rectified. But it?s much more difficult if these abilities are missing.

A large amount of our time is spent Indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

During the year 2014, Artex AB has worked to launch a new product whose function is to locally purify the air. The product is a headboard and its purpose is to give the user clean air while sleeping. The air purifier has different speeds and it`s up to the user to choose which effect that will be on. To get the best experience of the product as possible, the air purifier shall be controlled by a mobile application. In that way the user can increase and decrease the fan speed, even when the user not is home.

The number of people of getting allergic symptoms is increasing and the reasons are considered to be many. The human have changed their habits and spend more time Indoor. In combination with new building technologies where denser housing constructions and new materials this causes bad Indoor climate contributes to a higher occurrence of allergiesThere are several courses of action to deal with this problem. One action is by choosing allergy-free interior surface materials. An allergy-free material emits low concentrations of harmful substances resulting in a great Indoor air quality.

This thesis is based on a case study for the real estate manager Mimer in Västerås. Mimer provides a great deal of this city?s rental apartments. Many of their buildings have ventilation systems with a type of heat-recovery called ?heatpipe?.

Syftet med en integrerad projekteringsprocess är att information tidigt skall tas fram och att projektörer skall kunna arbeta parallellt, exempelvis genom en gemensam BIM-modell. Revit och IDA Indoor climate an energy, även kallat IDA ICE, har i denna rapport visat sig vara två mycket effektiva verktyg som tillåter att information både kan tas fram, i form av energianalyser, men även kommuniceras digitalt med hjälp av så kallade IFC-exporter. Då projektörer får möjlighet att jobba i en gemensam modell kan de arbeta parallellt vilket innebär att information kan tillföras både tidigare och snabbare i projekteringsprocessen. I Revit kan arkitekten enkelt skapa olika utformningsförslag och jämföra dessa med avseende på energianvändning. Analyser från denna studie har visat att energisimuleringar i Revit kan användas för att utforska olika utformningsalternativ och därmed finna optimeringsmöjligheter med avseende på energi och inomhusmiljö.

The purpose of this thesis is to examine how teachers work and reflects on gender education in preschools. We also want to take part of how teacher?s thoughts are reflected in the physical Indoor environment and how the environment is designed by reviewing the rooms furnishing and the selected materials. We will do this by visiting a number of preschools located in Stockholm and New York. We have chosen three questions to get the answers on our purpose.How teachers reflect around gender pedagogy are, and how the thoughts are expressed in the practical work.How the teachers communicate with their co-workers about gender pedagogy.How the teachers own thoughts and reflections on gender pedagogy have been expressed in the physical Indoor environment where the children stay during the day. We have used interviews and observations as a method to gather the information that we needed to answer our questions of the thesis.

The projects goal was to make an already existing Indoor positioning system useful forthe average smartphone user. This was achieved by creating an Android applicationwhich, along with a running server, continuously presents the user with all the currentneeded information. It uses the graphics engine andEngine to create the graphical userinterface. The application was created in the development environments Eclipse andAndroid Studio..

The purpose of the study was to determine the attitudes of the teachers of Reggio Emilia inspired preschools concerning the science work with children between the ages of one and three, as well as their opinions on how the physical preschool environment and the choice of materials influence their scientific work. The study was conducted in three departments of two different kindergartens. Although both kindergartens called themselves Reggio Emilia inspired, their working methods and their environments differed largely. None of them were originally built as Reggio Emilia inspired preschools. One of the kindergartens strived to design their Indoor environment the same way as the preschools of Reggio Emilia are constructed, there for they were setting up different stations where the children themselves have the opportunity to explore various scientific areas.

The rising demand for electricity and heat raises a big challange for the society and engineers. Many products have been introduced to the market to supply more energy to the energy systems. Absolicon AB is a Swedish company that develops and markets a combined heat and power generating product. The product, Absolicon X10, uses a parabolic trough to concentrate the radiation of the sun onto a receiver. The receiveris equipped with mono crystalline solar cells and is cooled by a circulating liquid media.

There are many different recommendations on how to keep pelargoniums over winter, but most of the recommendations suggest ?the higher the temperature, the more light and water the pelargonium needs?. The purpose with this paper is to try to explain the best and the worst results that are achieved with different storage alternatives of zonal pelargoniums. The results are based on an orientating investigation carried out in January-February, and a questionnaire that members of the Swedish Pelargonium Society answered to. Both the orientating investigation and the questionnaire showed that zonal pelargoniums are best stored light and cold but frost free. They should be irrigated according to their needs which is when the soil is dry, about every second to third week. Zonal pelargoniums are very resistant to drought and can survive without water for at least 44 days, both when kept under light and cold as well as under light and warm.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good Indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in Indoors, demands on a good Indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

Uppvärmningen av ett småbostadshus står vanligen för kring hälften av dess energianvändning. Enligt energimyndigheten drar det svenska standardhuset 22,7 MWh per år varav 12,2 MWh går till uppvärmning. Att ge värmesystemet så bra förutsättningar som möjligt bör alltså vara av intresse för varje husägare, kanske främst ur ett ekonomiskt perspektiv men även ur ett ekologiskt perspektiv.I detta arbete har olika energieffektiviseringsåtgärder studerats som kan implementeras i en tvåplansvillas värmesystem bestående av en värmepump, golvvärme på nedervåningen och olika värmedistributionssystem på övervåningen. Åtgärderna har innefattat både praktiska såsom val av isolering i golvvärmesammanhang och mer teoretiska såsom reglerstrategier. Relevant teori för de ingående systemen har presenterats och utgjort grunden för implementeringar av systemen i simuleringsprogrammet IDA Indoor Climate and Energy.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good Indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in Indoors, demands on a good Indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

How the renovation of the vast Swedish existing building stock with renovation needs will be performed is considered as decisive in order to achieve the target set by the Swedish government of reducing the energy use by 20 percent by 2020. Consequently, the challenge of the building sector consists in reducing the energy use in the existing building stock but at the same time ensuring that the Indoor environmental quality is improved and the cultural values are maintained.So far, there have been a few renovation projects which strongly have reduced the energy use and at the same time have taken into account the environmental aspects and the cultural values. The main reasons are that there have been few incentives and a lack of routines in order to steer efficiently a ?sustainable renovation?.The participants in a Nordic project on sustainable renovation thought that it would be a strong advantage to link the concept of sustainable renovation to the Miljöbyggnad certification system. Indeed it is trusted by the Swedish building and construction sectors and can provide sustainability targets in order to steer renovation processes.The objective of the master thesis is to show how the Miljöbyggnad certification system could be integrated in practice in the renovation process of Riksbyggen, an organization which administers housing associations (Bostadsrättsföreningar) and build houses.