The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

Uppsatsens syfte är att undersöka brukarens erfarenheter av socialtjänstens försörjningsstöd. Författarna undersöker hur brukarna upplever kvaliteten, bemötande, servicen samt informationen från socialarbetaren. En kvalitativ metod användes och intervjuer med brukare utfördes för att få djupgående svar på syftet. Ett totalurval utfördes och alla som sökt försörjningsstöd i oktober månad i Fagersta kommun fick ett brev med en förfrågan om att delta i en intervju. Sex brukare valde att delta, två kvinnor och fyra män i åldrarna 24-40.

The report begins with a general inventory of possible technical faults in a hydropower plant and of possible fault indicating measurements. Then an investigation is made concerning a few different faults. Based on this investigation a choice on seal box condition and water leakage is made as problem for a more thorough examination, in which it is concluded that the turbine water leakage is larger when the turbine is put into operation. The examination ultimately results in a computer alarm for faults related to the seal box. Finally a few things are mentioned about flow measurement and pressure measurement in relation to the project as a whole..

Försvarsmaktens sjukvårdsorganisation var under det kalla kriget och invasionsförsvarets dagar anpassad och dimensionerad för att kunna omhänderta tusentals skadade per dygn. Sedan 1990-talet har Försvarsmaktens inriktning fokuserat på internationella insatser. I kombination med förändringar inom det medicinska området, hotbilder, skadepanorama och folkopinionen har detta lett till nya förmågor inom den militära sjukvården. Sedan en tid har Försvarsmaktens inriktning ändrats till ett mer nationellt fokus. Vad har då hänt med sjukvårdsförmågorna? Denna uppsats använder sig av Moshe Kress teorier presenterade i boken ?Operational Logistics - The Art and Science of Sustaining Military Operations? för att göra en analys av de förmågor Försvarsmaktens insatsorganisation har idag.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

Den nya globala försvarsmakten ställer nya krav, inte minst på logistikkedjan där avstånden ökar och förutsättningarna för insats inte är lika klara som under det kalla kriget. Syftet med uppsatsen är att undersöka vilka krav ur en doktrinär synvinkel som kan komma att ställas på logistikkedjan på strategisk nivå kopplat till en strategisk rörlighet vid en framtida Svensk insats. Som empiri i uppsatsen används de doktriner och reglementen som finns i Sverige och i NATO som avhandlar logistikkedjan på strategisk nivå och strategisk rörlighet. Samt en fallstudie från Operation Iraqi freedom för att exemplifiera de krav som kan komma att ställas på logistikkedjan på strategisk nivå. Uppsatsens metod är deskription och fallstudie där fallstudien exemplifierar de problem som kan komma att uppstå.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

During the autumn of 2007 I attended a course in plantcomposition in Alnarp. The main task during the coursewas to make a proposal for a theme garden that was goingto represent the school at an exhibition in the GardenSociety in Göteborg, during the summer of 2008. Thetheme for the garden was set to ?sustainable development?and we had fully two weeks to work with the proposal.I won the competition and during the spring andsummer of 2008 I developed and realized my idea. Thegarden exhibition was inaugurated the 28th of June andwas open until the 28th of September.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

Efter avregleringen av lagarna under 1990-talet öppnas marknaden med uthyrning av personal. Bemanningsföretag anställer arbetstagare som därefter hyrs ut till kundföretag som strävar efter högre flexibilitet i schemaläggningen av arbete. Finns det ingen efterfrågan av arbete blir dessa anställda utan sysselsättning trots att de har anställning i ett bemanningsföretag. Syftet är att beskriva och förklara arbetsledarnas uppfattning om inhyrd personal respektive fast anställda vad gäller arbetsförhållanden och relationen till arbetsledaren. Uppsatsen är utförd som en flerfallsstudie byggd på intervjuer med arbetsledare i företagen Coca-Cola Drycker Sverige AB, Posten Logistik AB, Schenker Logistics AB och Spendrups Bryggeri AB.

By today?s date there are a lot of companies that are in great need of restructuring their paperwork in a more organized way. This can be excellent arranged with the help of properly constructed computer software. The aviation industry is no exception, but actually a good example of this. Täby Air Maintenance (TAM) is a company which is situated in Örebro.

The International Organization for Standardization (ISO) proposes vibration standards for the evaluation for machine damage due to vibration in rotational machines, where some vibration parameters are given to measure the vibrationgrade. This work evaluates the relevance of the vibration standards in hydro plants that are proposed by the ISO, and also investigates if there are methods used in other countries could have greater importance. Through statistical analysis of collected data we got a better understanding of relation among different vibration parameters, and also the importance of correct choice of the parameters for the evaluation of vibration. We have found that the vibration standards available today in hydro plants are not reliable for the judgment of vibration?s grade.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.