Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

ISO14001:2004 : A Human Ecological Tool?This is a study by means of litterature analysis and personal experience to find out wheather you could call ISO14001:2004 a Human Ecological tool. The ISO14001 is an environmental management system. I'm approaching the issue from a users' perspective and putting my experience of implementing the ISO 9001 at my work to good use. Though my personal experience is limited to the implementation of the ISO 9001, it is quite relevant to the task since the update of 2004 the ISO14001:2004 is brought closer to the ISO 9001 standard in many ways.

This master thesis is about the production of the record ?Brutus? with the band ?Trilobit?. Trilobit consists of the three musicians, myself, Stina Hellberg Agback on pedal harp, Simon Sva?rd on guitar and Karl Jansson on drums.During the production, I have analyzed different aspects of my own musicality and also the role of the pedal harp in jazz. I have found techniques that have simplified chromatic movements on the pedal harp, and also techniques that has developed the rhythmical aspect of my improvisation.I have also looked into my process in improvising and composing and developed new aspects, many thanks to the close collaboration with Simon Sva?rd..

The new media landscape is growing by the minute with blogs, web pages and different communities. The latest phenomenon that has grown rapidly throughout the world is Facebook. This is at new platform for communications where individuals can meet and socialise. Even political actors have started to appear on this community to work and spread their opinions. Several of the Swedish political parties are represented with different group, among them we have the two biggest political youth organisations: MUF (Young conservatives) and SSU(Young socialists).This study examines how Facebook can be used as a tool to create opinion.

Johan Moir spelar kontrabas och trumpet och undersöker hur han förhåller sig till dessa olika instrumenten när han improviserar. Vad är det i instrumentens natur som tvingar en att improvisera på olika sätt? Vad kommer inifrån en själv och vad påverkas av instrumentet? Johan bearbetar i det här arbetet musikaliska parametrar och utgår hela tiden från sina egna tankar och reflektioner. På den bifogade CD skivan, kan man även lyssna till hans solokonsert på kontrabas och trumpet och även följa hans reflektioner av denna..

At vaere både sangskriver/komponist og udövende musiker med sin egen musik i fokus kraever en del reflektion. Disse roller er af meget forskellige karakter og kan kraeve både en evne til at lytte indad til at kunne håndtere den sårbarhed, det medförer at stå frem og spille sin personlige musik for andre. Det kan vaere en udfordring ate finde den fine balance, hvor de personlige "historier" fortaelles med en stor grad af autencitet, samtidig med, at de skal vaere vedkommende for andre end én selv..

Title: Social media as a communication tool - A case study on social media influencecorporate cultureLevel: Final assignment for Bachelor degree in Business and EconomicsAuthor: Jessika Klintsbacka & Oskar BergeSupervisor: Pär Vilhelmsson, Ernst Hollander & Maria Fregidou-MalamaDate: 2014-06-13Purpose of Study: The aim of this study is to inquire into Swedish companies internalcommunication, their approach to social media as an internal communications tool, and if itaffects the corporate culture.Method: The study is a multiple case study with a qualitative research design. The study'sinterview questions were designed by a operationalization of based on theory in the areas ofinternal communication, corporate culture and social media. The interviews took place inApril 2014. The interviews were recorded and then analyzed to bring out the similarities anddifferences between the companies.Results & Conclusion: The study shows that Swedish companies corporate cultures haveconnections with internal communication, and implementation of social media as acommunications tool. The study found that connections to companies with a comprehensiveone-way positive consider social media as alternative communication tool to strengthen theunity and community within the company.Suggestion for further research: One of the study's three companies is owner-led and thiscompany showed a high level of corporate culture.

Gender mainstreaming has been an internationally dominant policy since the mid 1990?s. In 2004, the Swedish government decided to implement gender mainstreaming within the Government Offices of Sweden. However, little research seems to have focused on the reasons for an organization's decision to implement gender mainstreaming. Consequently, the purpose of this study is to answer the question why the Government Offices of Sweden have decided to use gender mainstreaming.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

Den här rapporten beskriver ett examensarbete för högskoleingenjörsexamen i datorteknik vid Växjö universitet. Vid företaget BSR i Växjö pågår utvecklingen av ett diagnosverktyg benämt BSR Diagnostic Tool. Syftet med projektet är att kunna använda en hårdvaruklass som kommunikationsdel istället för diagnosverktyg från de olika biltillverkarna. Inom objektorienterad programmering är en klass ett avsnitt programkod som samlar en mängd relaterade attributer och funktioner för ett objekt. I rapporten beskrivs implementeringen av hårdvaruklassen samt tillhörande teori för kommunikationsbussen som används, nämligen CAN.

Public participation is a key aspect in the planning of Swedish municipalities. It is probably the most important tool of them all in the planning towards a sustainable future within the cities and the municipalities as a whole. Participation from the public can take on several different forms. In this paper I focus to research and discuss in and around the usage of a web-based 3D platform called City Planner. The tool allows the user (the public) to view the municipalities planning in a fairly new (but quickly growing) environment.

In today?s society more and more activities are digitalized. This means that everyone has to be able to use information and communication tools (ICT) in order to take part in the digital world, otherwise they will be left out of the digital community. There is a so called digital gap between for instance elderly and young people, where elderly do not know how to use the tools and there for cannot gain access to the digital society. What happens when people, not only grow old, but also have a communication disorder, such as aphasia? How are they included? The purpose of this study is to investigate whether or not surf pads are good tools for bridging the digital gap for people with aphasia, and which activities and situations that encourages people with aphasia to work with the surf pad.

ABSTRACT Title:                                                Retargeting- When display advertising builds                 loyalty Authors:                                           Mikaela Johansson och Anna Svensson Kjällberg Advisor:                                           Thomas Helgesson Level:                                               Bachelor´s in thesis in Marketing, (15 Swedish       credits) Spring 2014. Keywords:                                        Retargeting, branding Question:                                                    In branding, how should small e-enterprises            work with retargeting? Purpose:                                           The purpose with this essay was to identify how    retargeting should be used in small e-enterprises                             when branding. This was done by comparing two e-enterprises practical use of retargeting, with two                           brand consultants and two retargeting consultants theoretical knowledge within each expertise.   Method:                                            A qualitative method with a deductive approach    has been used to answer the problem statement.  Theoretical framework:                              Earlier theories about retargeting, brand building    and recommended practices, related to marketing                       on the internet, were presented in the frame of       reference. Empirical framework:                                 Primary data were presented by two respondents   representing each area: Companies, Retargeting                        consultants and Brand consultants.Conclusion:                                                   The          marketing tool allows companies and      their               brands to get the chance to appear in                        wide area                      networks on the internet.    The tool is primary used                                                                for a sales                      purpose but the tool also has potential in brand-                                                                       building purposes.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

I wrote this thesis for myself and someone who would like to learn improvised music not from Jazz but Bach. I analyzed one composition by Bach, then I showed one example of using his idea to a Jazz standard tune. It was challenging for me to understand and analyze his composition as a Jazz improviser. To be honest I don't like to learn the music language from Bebop music but I like to play Jazz standard music. If someone would like to be good at playing jazz music, I think that it is important to know the music language in jazz.