This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an Improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for Improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for Improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for Improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors Improvements was amendments.

Today's fierce competition means that companies constantly must develop their business and internal processes. Focus on processes and continuous Improvement is something that characterizes Lean Production which ICA logistics are applying with their concept Leading Logistics. Standardized routines for handling damaged gods were insufficient at the ICA distribution center in Kungälv. Handling and registration of damaged gods were not performed uniformly, resulting in problems with controlling and monitoring the process.The purpose of this thesis was to analyze and make recommendations how the process of internal handling of damaged gods could be improved. Therefore a comprehensive understanding was needed of the entire material flow through the warehouse and important quality aspects such as product safety and delivery reliability.The methods used are literature reviews, interviews and observations to produce a comprehensive process mapping of the current situation at the distribution center.

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains Improvement suggestions about how the company can use the current computer system more efficient.The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if Improvement can be done and how the flow of information is supposed to happen.In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.The work consisted in making the groundwork for a template.

The purpose of this thesis is to make a comparative literary study of ten laboratory experiments with different kind of sources for query expansion terms. The experiments are grouped according to categories of term sources, which are: search results, collection dependent knowledge structures, collection independent knowledge structures and one that combines the two last mentioned sources into one. To enable a comparison all other variables were held as constant as possible. There is the Improvement measured in mean average precision, which is used to measure the various sources potential. The result from the study shows a strong connection between the kind of source for the expansion term and Improvement of the result.

The purpose of this thesis is to describe how principals apprehend the school library. In order to respond to this I formulated three questions: How was the Improvement of the school libraries carried out in one municipality? Is the school library experienced as a part of the schools organization? How is the use of the school´s library experienced? To be able to answer these questions, for the purpose of this thesis, I have studied relevant literature on school libraries, the school organization and literature on qualitative methods. I have made six qualitative interviews. The objects of the interviews were three librarians and three principals.

If Sweden want to be able to compete internationally with its production capacity,it is important to work actively with production development and production ofresource-and time-efficient. This report is a bachelor thesis of 15 hp conducted atthe University of Halmstad. Using the principles of continuous Improvement andLean Production, the author developed a concept for HAGS Aneby AB to changeto the customer order driven assembly of spring toys.First of all, the theories of Lean Production, logistics and ergonomics are used tobuild and present a theoretical framework for further examination. Then, toachieve the target, the current assembly process is analyzed to develop some firstconceptual ideas for Improvement. In order to develop the best advice, theconcepts are evaluated against the company?s requirementsThe developed action plan gives recommendations on how the company shouldrestructure their assembly process and the organization of the related departmentin order to produce spring toys in a more time efficient and lean way.

Objectives: The purpose of the study was to examine if a pre- and post-operative difference could be seen in self-reported pain disability and self-efficacy among patients undergoing surgery as treatment for spinal disc herniation in order to improve process of rehabilitation.Method: A quantitative and descriptive design was used. 10 patients awaiting surgical treatment for spinal disc herniation were included at Akademiska sjukhuset (The Academic Hospital) in Uppsala. Participation was voluntary and the selection was made by convenience. Data was collected using The Pain Disability Index and Self-Efficacy Scale by which the patient would estimate how hindered they felt because of their pain in everyday activities and their self-efficacy to perform everyday activities. This was done the day before surgery and two weeks after surgery.

The purpose of this paper is to examine information sharing in a hospital organization that is undergoing reorganization. The aiming is to make all employees at all levels actively involved in business development in order to create a smooth and, from a patient?s perspective, adequate emergency care. The paper suggests that the theory of social capital can explain the complexity of what motivate and what promote individuals to share information. The method used in the paper is the case study, focusing on detecting, interpreting and gaining insight on how information shares in an emergency department.

Through a thorough analysis of the current situation, we have highlighted differences inworking methods for the various workshops and drew up proposals for Improvements incombination with a practical work description that can be implemented in the company..

This paper examines and analyzes effects of the introduction of a new management control system tool within a Swedish public health organization, the Södra Älvsborg hospital, and its possible effect on organizational change. The new management control system tool, known as the SÄS-model, has been widely criticized for being too costly and with too small positive effects to be shown. Our approach has with that as a background been to examine whether the implementation of the SÄS-model and its balanced scorecard has been able to result in effects regarding organizational change. We have through a case study aimed to analyze how a management control system, much alike one that is typically used within foremost private organizations, can promote organizational change. Our results suggest that the implementation of the SÄS-model and the balanced scorecard has given the organization clearer visions and goals.

This thesis examines a possible control strategy to minimize flow fluctuations in Uppsala?s district heating system. High variations in flow rate may lead to complications caused by hydraulic constraints in the district heating system. These complications, such as inadequate pressure and temperature levels, increase the risk of heat delivery failures. It is therefore important to avoid such situations both for the producer and for the customers.Typically, the forward temperature is controlled by using a rough correlation with respect to the outdoor temperature.

The development of technology and the mechanization in the Swedish forestry has during the last 60 years resulted in depopulation of the country side and due to that the amount of distance forest owners has increased. Therefore the forest companies need to make some adjustments in order to keep the distance forest owners as customers and to attract new ones. The purpose of this essay was to examine and analyze the distance forest owners satisfaction with Södras service offering and quality of service and further develop some proposals for action. A web-based survey was sent out to 634 distance forests owners in Stockholm, Sweden, all members of Södra. 269 respondents participated in the survey and of them, 27 did also participate in a follow-up telephone interview.

Ambulatory surgery is common and develops alongside surgery and anesthetic methods. Time admitted is short and aftercare takes place in the home environment.Objective: The aim of the study was to investigate which symptoms patients experience after ambulatory surgery related to anesthesia. Furthermore how strongly symptoms affect the patient. Symptoms appear as a result of anesthesia and surgery and can therefore be interpreted as nursing induced suffering.Method: Participants were recruited at ambulatory clinics at a Swedish university hospital spring, 2015.  Prior to the study permission was granted from the clinic managers. The study is a quantitative descriptive longitudinal study.  Data collection forms were administered and data collection was performed by phone.

The purpose of this report is to come up with possible Improvement suggestions to the distribution central at Götene Stål & Verktygs AB (GSV). GSV is a wholesale dealer located in Götene. The company doesn?t produce anything it self, it buys in products and sells them to customers.The distribution central at GSV is the place where the products comes in and gets ready to deliver.To come up with possible Improvement suggestions we started with process mapping over the main process and the distribution centre process. The main process here is from the point where the customer gives GSV an order to the point where GSV deliver the order.Our result shows that the major problem in the distribution central at GSV is the big volume differences in the incoming goods.