During the last decades the importance of IT has increased for businesses all over the world. It has transferred from only being used in administrative purposes to become more integrated to the core business. Due to the financial crisis in 2009 and increasing globalization, IT is facing the challenge of lower costs and increased efficiency. This requires IT-departments to embrace new strategies in order to fulfill these new tougher demands.Lean is a business development concept that aims to lower costs through more effective processes by removing all activities that does not create any value from the end customer?s perspective.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested Improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

Syftet med detta examensarbete var att undersöka vilka faktorer som krävs för en lyckad implementering av ett förbättringsprogram i en organisation, oavsett vilket förbättringsprogram som används.Förbättringsprogrammen har vuxit fram ur kvalitetrörelsen och har sitt ursprung i ständiga förbättringar och PDSA-cykeln. Förbättringsprogram används av ledningen för att uppnå en högre grad av kundtillfredsställelse, på ett strukturerat sätt.En implementering av ett förbättringsprogram måste successivt lanseras i en organisation genom introduktionsfas, försöksfas, införandefas, expansionsfas och integreringsfas. I införandefasen används tre olika typer av införande av förbättringsprogram totalt, delvis och införande under befintligt koncept. Implementeringsprocessen måste mätas för att det ska kunna avgöras om den blev lyckad eller inte.Metoden som använts i detta examensarbete är en kvalitativ forskningsprocess med hermeneutiskt ideal av kvalitativ metod med en kombination av etnometodologisk tradition och naturism. Författaren har använt sig av en tvärsnittsdesign i tidsaspekten.

Purpose:The background to this study is an upcoming sale of a property. Owner of the property is currently city of Gävle and tenant is Jan Ekroth who runs the hostel Gamla Gefle in the buildings belonging to the property. The purpose of this study is to investigate whether Gamla Gefle AB has the financial ability to acquire the property and if it can be defended in a commercial plane.Method:In this study a qualitative method has been used, in which empirical data has been gathered from interviews and financial data taken from annual reports. These empirical data have been put against our theoretical framework and led to our analysis. In the analysis, cash flows and discounted future values have been calculated to determine the outcome of the investment.Results & conclusion:The study reaches the conclusion that the hostel Gamla Gefle should complete its acquisition of the property, in spite of an decrease of the annual cash flow.

Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

Background: Relatives to people with schizophrenia often experience a great burden and inmany cases takes a lot of responsibility for the person suffering from schizophrenia. Nationalguidelines emphasize the importance for relatives to be involved in mental health care, butunfortunately that is not always the case. Objective: The aim of this study is to investigateand describe how relatives to people with schizophrenia have experienced collaboration andsupport from mental health services, and what requests they might have for the futureregarding the design of collaboration and support. Method: Qualitative approach. Interviewbased study with qualitative content analysis as a method.

Medieföretaget AB is a Swedish Media Company that covers several different business areas.The company daily produces one of the biggest newspapers in Sweden and publishes editorialnews on one of the country?s most visited news homepage. The company also has smallerfirms that produce new business models. Due to big changes in the media climate over theworld and a new company management team the company in November 2008 started adepartment for innovation. The main purpose of the department was to create a structuredway for managing ideas and to promote innovation.

Companies become more and more aware of the added values of the packaging. A well chosen and developed packaging can reduce the costs for the companies through reduced costs for transports, reduced quantity of waste and discards and increased goodwill for example. The companies? costs for salaries can also be reduced due to the increased packaging handling efficiency and the reduced costs for sick leave, reduced work capacity and rehabilitation etc. that can arise when handling poorly developed products and packaging.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  Improvement potential  in the material management connected to the planing mill.  Part.3: Suggest Improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

Bakgrund: Bristande kommunikation och informationsöverföring är huvudorsaken till upp-komsten av vårdskador i hälso- och sjukvården. Komplexiteten i hälso- och sjukvårds organisat-ion i kombination med den mänskliga faktorn ställer krav på struktur i kommunikationen med hjälp av standardisering. En utmaning för hälso- och sjukvården är att implementera och studera standardiserade kommunikationsmetoder och studera effekten på patientsäkerhet och arbets-miljö. SBAR (Situation-Bakgrund-Aktuell Status-Rekommendation) är en kunskapsbaserad kommunikationsmetod, utvecklad för överföring av kritisk information i komplexa arbetssituat-ioner. Metoden hjälper till att skapa den struktur och förutsägbarhet som krävs för effektiv kommunikation i komplexa arbetssituationer såväl under normala förhållanden som under stress.

Information technology and globalization has led to an increasing competition and service production has been more and more independent of locations. This has made a market of outsourced telephone costumer service possible. Due to high establishment the market has been saturated and with that price has sunk. Customer companies have the last few years got more negative to outsourcing of their telephone customer service as they through operating the customer service internally want to get closer to their customers.In the empirical study the writers try to figure out which companies the callcenters should try to aim towards to get long and profitable cooperation. This will be done through deducing guiding principles from theories about how different factors around companies costumer service should look like.

In the debate on laying hen welfare, and specifically housing conditions, the main focushas been on physiological and behavioural measures. What is lacking is knowledge of howthe hen experiences the situation ? her state of mind.This study is an attempt to gain insight into the private mental states of former batteryhens. It uses a cognitive bias method based on spatial judgement, i.e. judgement of aambiguous stimulus placed spatially in between a reinforced and an unreinforced stimulus.This method has previously shown differences in judgement by animals in enriched versuspoor housing.

This thesis deals with the field of warehouse management, focusing on frequency control of stock. The purpose of the thesis is to reduce the warehouse staff mileage by placing an article based on its number of picks, i.e. how frequently it gets picked. In order to achieve relevant results the following four questions have been answered in the thesis: How should the articles be placed with regard to the picking frequency?Which factors, if any, needs to be addressed beyond the picking frequency when articles are placed based on frequency?Can the present picking system be improved?Is frequency placement with regard to the picking frequency profitable to implement for the company?The thesis is based on literature studies and on the data that has been collected from the company?s business system.

The purpose of this study was to describe senior nurses? expectations concerning how a digital information and communication technology systems (ICT) can contribute to the Improvement of care leadership and how it can strengthen ties between the school's theoretical world and the practical clinical work-based training (WP) in nursing. The study has a descriptive design with a qualitative approach. The study involved seven leading care nurses. Data were collected through semi-structured interviews.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.