This thesis deals with the design of a combinated rescue-, personal-, and firefighting elevator for a nuclear waste storage facility to be constructed by the client SKB, Svensk Kärnbränslehantering AB. SKB:s mission is to dispose of all nuclear waste from all swedish nuclear power plants. The storage facility will be built in the rock 450 m under the surface and will consist of several kilometers of tunnel where capsules containing the nuclear waste will be placed. It will also hold a central area which contains spaces necessary for the operation and construction of the facility, such as elevator hall, storage hall etc. The facility will have two ways of access: a vehicle ramp and an elevator shaft.

Energy efficiency has become a very topical issue that has been discussed throughout the European Union for preventing negative environmental impacts that have been associated with the consumption of energy. In the residential sector have mainly municipalities set strict requirements for the reduction of energy consumption while the renewable energy has been asked. Different concepts of low-energy buildings have been developed to reduce the cost of operation and maintenance in existing buildings such as in new ones.This thesis has aimed to minimize the energy cost of a large building which has had low energy consumption features originally. Energy reviews has been initiated in order to be able for showing how the house electricity could be carried out even more efficiently.The work was initiated through a literature study to clearly increase the reliability on the energy subject. Different concepts of low-energy buildings have been treated in connection with its specifications, afterward those have been compared with the obtained results.

The following report is based on the graduate job course in CAD technician program year two. The work reflected in the report is done in collaboration with Hans-Erik Eldemark. This work includes the development of a progress bar for dishwashers.The execution of the thesis has involved a list of criteria with conditions and requirements, which after where weighted in a matrix. Subsequently, the product proposal was developed and has been divided into three categories, twist mechanisms, attachments and exterior design. Finally, suggestions have been designed in CATIA V5 and prototypes were produced using 3d-printing.

The problems around and the planning of wood flow is some of the most complex issues in the forest-sector. The experience and overview of the single employees is crucial for the possibility of correct tactical and economical decision-making. The increasing demand of savings and shorter reaction-times with greater flexibility in the wood-supply-chain, makes solutions and aids for improved effectiveness in the work and processes according to wood-flow urgent. Holmen Skog is starting to develop a new forest-road-management-system. The system will facilitate the work according to construction, improvements and updating the standard of roads.

Background: Hepatitis E (HEV) is a small, non-enveloped virus that belongs to the viral genus Hepevirus. HEV is a positive sense single-stranded RNA virus and there is insufficient information regarding its replication. This is mainly because the virus has low capacity to grow in normally used cell cultures. Many specific strand assay detection studies have been done in order to understand more about HEV replication. Unfortunately, these assays have the disadvantage of giving false positive results.Aim: The aim of this project was to improve the positive strand assay to increase specificity and eliminate false positivity which is due to high sensitivity of the polymerase chain reaction (PCR).

Bakgrund: Kvalitetsutveckling inom vården pågår i hela världen. Internationell forskning indikerar att förbättringscoacher kan vara en framgångsfaktor i förbättringsarbetet. Det är i dag oklart hur man kan utveckla interna coacher till att stödja kontinuerliga förbättringar. Studien utvärderar ett lokalt, tvärprofessionellt coachprogam inom vård och omsorg i ett geografiskt område i Sverige med en etablerad samverkanskultur. För att främja ökad kundcentrering ingick en pensionär i programmets planeringsgrupp.

The purpose of this master?s thesis was to find problems that occur in the production line at Atlas Copco Rocktec Division, in order to decrease the costs of defect in quality. When the problems were distinguished, the authors ought to choose the problem with the highest improvement potential. One request from the constituent at Atlas Copco Rocktec Division was to connect the improvement to the document The Way We Produce. The document provides information and values about Atlas Copco and consists of 10 principles to be able to reach their vision.

Near Field Communication (NFC) is a short range wireless communication technology that enables data exchange between devices. NFC is used in many different areas, from subway tickets to authentication systems. This paper presents possible security threats to Near Field Communication and documented attacks that have been used to target various NFC protocols. Weaknesses in different NFC protocols will be presented and suggestions on how to counter certain weaknesses will be discussed. This survey will be valuable for companies interested in protecting their data when using or planning to use NFC systems..

To increase the understanding of how individuals total life situation affects their stress level and health has lately more frequently been discussed in different contexts. Furthermore, it is important to have knowledge of power structures that exist under given circumstances in a society to get an increased understanding of how to structure the health promoting work to get the highest possible benefits. People?s work life is essential to their health, since we spend a lot of time at work. The aim of this study was to find out which factors that relate to nursing staff?s health and stress level from a general perspective.

The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

This essay will cover the Swedish electoral system with a focus on the proportional representation andthe process involved from the conversion of votes to seats in the parliament. This process consists ofseveral methods which are created by political decisions as well as mathematical formulas and is notalways perfect in terms of equalization. An increment of six adjustment seats would have made thegeneral election of 2010 more proportioned. Despite this, the Swedish electoral system is wellconstructed and the essay will highlight areas which could be subject for improvement as well asexplaining fundamental concepts of the process..

The aim: was to describe and compare a group of experts and critical care nurses' agreement in detecting delirium in intubated, ventilator treated patients with sedation / analgesia, before and after an in house training intervention with the instrument Confusion Assessment Method for the Intensive Care Unit (CAM-ICU).Method: A quasi-experimental study, one group pretest - posttest design. A convenience sample of 17 critical care nurses in a general intensive care unit included. To detect delirium the instrument CAM-ICU was used, 21 paired tests before and 22 after an educational intervention.Main Results: The results showed that after an in house training intervention sensitivity and kappa coefficient improved of the characteristic 1 "acute onset and fluctuating course," an improvement that was significant. In other features, and overall values were signs of numerical improvement and deterioration in sensitivity, specificity and kappa coefficient but no significant change.Conclusion: Implementing a new instrument for detecting delirium in clinical practice requires education and follow-up. A small sample of critical care nurses with varying ability to use the new instrument and the fact that patients' status may change rapidly making it difficult to draw any conclusions from this study.

To increase the understanding of how individuals total life situation affects their stress level and health has lately more frequently been discussed in different contexts. Furthermore, it is important to have knowledge of power structures that exist under given circumstances in a society to get an increased understanding of how to structure the health promoting work to get the highest possible benefits. People?s work life is essential to their health, since we spend a lot of time at work. The aim of this study was to find out which factors that relate to nursing staff?s health and stress level from a general perspective.

The aim of this study is to investigate the problematisation of the swedish railwaysector during the early 1990?s from a New public management-perspective. The method of approach is a ?What is the problem represented to be?-analysis as advocated by Carol Bacchi. By applying this method to the official investigation aimed at providing suggestions for increasing competition in the railway sector it has been shown that the process of deregulation has strong connections to the ideas and models suggested by the New public management-ideology of organisational theory. .

The aim of this report is to develop an improved basis for calculation of common costs as well as to create a support, showing which steps can be taken for improving the future monitoring at NCC Hus in Karlstad.The objective of this report is to improve the quality of the process of quoting by verifying current key numbers, production of new key numbers and to identify the problems affecting the monitoring of projects.The objective is also to provide suggestions of actions improving quality assurance at NCC Hus in Karlstad..