This report describes an examination project made for the IT consultingcompany Sogeti. The purpose of the project was to develop and modify the translation tool Language Manager (LM) built by Sogeti to be used for translating applications. Employees at Sogeti considered some disadvantages with Language Manager, version 1.0 which among others was that language files for projects were saved at two locations. Partly in resource maps among with the source code of the applications and partly in a database. This was dual work for employees at Sogeti and it also caused redundancy inthe system.

Many companies are currently working to optimize and streamline their processes and production lines to achieve higher profitability. In increasingly competitive markets, companies are working to find solutions to increase the value of their production with such a small use of resources as possible. A tool used to accomplish this is the Lean management system. Lean comes from the production system that Toyota has been developing since the early 1900's, The Toyota Production System (TPS). The Lean philosophy helps companies, by working towards continuous improvement in its operations, to achieve higher customer satisfaction, more efficient production and ultimately higher profitability. Many companies are working to implement Lean in their organization. But there are many who fail to implement a complete change towards Lean.

In my degree project, I explore the importance of distance and how our perception of distance is affected by our experiences.During my investigatory work I studied the relation between distance and experiences. Among other things I concluded that distance can refer to several different kinds of distances (for example spatial, temporal or social distances) and that experiences are what you?ve learnt of these distances. The importance of distance can be illustrated by highlighting the effects of the distance, i.e. experiences.My degree project resulted in a pair of interactive binoculars which are used for looking at an virtual world of illustrations in 360°; a world of illustrations where distance and the importance of distance is shown..

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

 Date                   May 28, 2009Level                  Bachelor thesis in Business Administration/Information TechnologyAuthors             Jennie Andersson, Niklas Fridell, Visar HoxhaTutor                  Marie MörndalDepartment    HSTTitle                    ERP-solutions in small to medium sized enterprises ? possibilities and problemsSummary          ERP-solutions have penetrated the market for SME: s, offering the same advantages larger enterprises have enjoyed for years. For a significantly cheaper price, SME: s can nowadays acquire ERP-solutions and become more effective and increase their profit.  The authors have examined five SME: s in both the production and service company segment and have come to the conclusion that an ERP-solution would indeed benefit these companies in many levels but also induce certain obstacles the examined companies must overcome, both financial and organizational.Purpose            The purpose of this thesis is to examine if and how SME: s can become more efficient and developed and increase their profit by implementing an ERP-solution. Further, the purpose is to discuss which conditions that exists for the examined SME: s in order to implement an ERP-solution.Method            The thesis consists of a qualitative research where the authors have interviewed either the owner or employees at management level by using semi-structured interviews.

Many enterprises have shortcomings in the transfer of information between different departments. Furthermore, routines for maintaining knowledge in order to be able to use this experience in the future are often lacking. Time and resources spent on improving these systems and procedures can provide significant benefits in terms of saved time and reduced costs in the later stages of a project. The benefit of this is not only a greater clarity and a reduced risk of misunderstandings, but also the preservation of knowledge that would otherwise be lost.The aim of this study has been to examine the process of information transfer and the transfer of knowledge between the calculus department and production manager in projects at Erlandsson Bygg i Öst AB. An additional aim was suggestions for improvements in the calculation handover and at the end of a project, where it was possible.The study was primarily conducted through literature studies and interviews.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.

Shear Strength and Deformation Characteristics of Uppsala Clay with CRS and Standard OedometerTyra Morell Bonin & Magdalena MählerTo see how much a clay compact under different pressure one can use several different methods and in this project, two methods were used, the Standard Oedometer and a CRS apparatus. A Standard Oedometer is a full-time manual device and the CRS apparatus is a modern electric and automatic device. The aim of the project was to see similarities and differences between the two methods and examine which method that were most reliable. This has been done with repeated laboratory tests and afterward evaluations. With this information one can get a picture of how the clay will behave and how it will deform in nature.

Hedemyr?s project has been about finding a meaningful position of utterance and a language for her practice. The general theme is performative art in public spaces.This text is a meta-narrative about this development and transformation process. It is also a proposal for choreographic practice as text, and thus a suggestion for what performative text could be.Her master project includes three intertwined parts. The foundation is an ongoing ?doing?.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

The purpose of this thesis is to evaluate 7 different search strategies for content-based image retrieval with respect to retrieval effectiveness. The strategies are based on different levels of resolution implemented by the Haar transformation. The result of the study shows an improvement in both mean average precision and mean recall in strategies based on lower levels of resolution..

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..