The purpose of this study is to seek answers to an ongoing problem in the forest sector; why scarifying operators quit their job. Scarification quality is crucial for successful reforestation after clear felling. It is therefore important to keep good operators working in the business. To collect the desirable information interviews were made both with contractors who are working and operators who have stopped working with scarifying. The conclusion one can draw from this report is that the scarifying operator job needs improvement in multiple areas. The former operators are mostly dissatisfied with the stress, low wages and negative physical effects that this work brings..

In the beginning of the nineties there was a change in how the voluntary sector was perceived, and the significance of their work became reevaluated and more acknowledged. As a result, this sector gained a new and higher interest. The changes and downsizing in the welfare state with economic crises, due to political cutback, made the politicians look fore new solutions. One solution is to encourage cooperation between the public sector and the voluntary sector in order to handle the different needs of individuals.Uppsala community and the voluntary sector are working closely together within a project called ?God Livsmiljö?.

Introduction In order to foster innovation of medical devices within the healthcare sector, a collaboration project, PUSH, has been initiated including the hospitals managed by the Stockholm County Council. The collaboration aims to capture ideas from employees and turn them into so called ?high-practice? products as well as facilitate the possibilities for medical device companies to try out their products in the settings of healthcare. Collaborations for innovation, comparable to the PUSH project, can be found in both Swedish and foreign regions, but some of them fail to survive due to obstacles affecting the progress of each collaboration. Avoiding the same destiny will be a challenge to the PUSH project.Purpose The purpose is to search for factors affecting organizational collaboration concerning innovation systems for medical device development.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

This report describes the bachelor degree project called ?A case study in strategic product design in collaboration with Elfa? carried out by Mathieu Gustafsson and Pär Rickberg,students at Carl Malmsten Furniture Studies.We had the opportunity to do our degree project in collaboration with ELFA after a previous school project where we made suggestions for new products. Initially the brief was to develop new products for the company which was based on previous proposals.Reasoning led us in to design strategies and how to use such a strategy to develop newproducts for ELFA. During our first superficial analysis of ELFA and its current products, we found that we wanted to recast the framework of identity and context in which the product would be created. According to the researches made by SVID (The Swedish Industrial Design Foundation),companies that continually are working with design strategies strengthens the brand, its competitiveness and become more innovative.

The idea for this project was initiated together with one of the leaders in the forest, paper and packaging industry. To get through an A/R CDM process the company is exposed to the risk of failing the process or that the overall costs will exceed the benefits of the project. This would delete the incentives to invest in GHG removals compared to purchasing emission allowances on the carbon market. The questions that have been raised and needs clarification in the thesis are the following:? From a company perspective, what are the incentives for implementing Forest Clean Development Mechanism (CDM) projects?? What is a likely financial outcome of a reforestation CDM project on degraded land in the Guangxi province of the Peoples Republic of China?? When does an investment like this break even with the cost of buying market based carbon emission allowances? The objective of this master thesis is to carry out a research about the incentives for forest, paper and packaging companies to invest in reforestation through the clean development mechanism.

This exam paper has been a collaboration between the writers and System Anderson AB. The assignment was about completing a client application, running on a PDA, and a server application, running as a web service. The web service handles the communication with System Anderssons existing database. The main goal for the application is that it will be used to increase efficiency in storage management. The client application will hold functions for withdrawal, purchase, delivering and inventory.

Energy and environmental demands regarding buildings have become an increasinglydiscussed topic, both in Sweden and in Europe as a whole. The general trend indicatesthat greater efforts are being put into the energy efficiency of the built environment.There are already numerous examples of houses with a low energy demand, and thenumber of low energy buildings is constantly growing.At the time being, the maximum level for energy demands for housing in Stockholm is110 kWh/m2year, but as soon as next year the limit will be changed to 90. The Swedishagency Energimyndigheten is currently conducting a project to interpret the EU Directiveon the so-called Nearly zero energy buildings, and the preliminary results indicate thatthe level of requirements for purchased energy will end up with about 55 kWh / m2year,which is in line withtoday?s recommendationsfound in FEBY's Kravspecifikation förPassivhus.Starting with a low-energy house in Henriksdalshamnen in Stockholm, we have analyzedvarious energy-efficiency measures and their influence on power and energy needs. Thefinancial aspects associated with the measures have been studied using a model of lifecycle costs.The measures were initially studied individually to give an idea of how much impact theyeach had.

Exotic small animals that are commonly kept as pets include aquarium fish, cage and aviary birds, rodents, rabbits (Oryctolagus cuniculus), reptiles and amphibians. These different kinds of animals, even species within the same class, may differ markedly from each other regarding physiology and requirements. Although these species are common in both Swedish households and in pet trade, many animal keepers have a lack of knowledge about the origin and requirements of their pets. This is a cause of several health problems seen in animals which are held in captivity. In Sweden, the county administrative boards perform all animal welfare controls.

The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability calculation from several of AGV-suppliers..

The process of economic globalization has in recent decades increased the power of multinational corporations. In recognition of their powerful position, corporations have begun to adopt Corporate Social Responsibility as a way of managing their social impact. Their interaction with the surrounding society reaches a peak when involved in large-scale projects, such as the Three Gorges Dam in China and the Narmada Valley Development Project in India. This essay analyses the concept of Corporate Social Responsibility in a comparative study between the two cases. By using current research, it focuses on the role of civil society for making Corporate Social Responsibility effective in developing countries.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

During the years of development in the 60s and 70s the need for new housing in Sweden arose. Sweden was going to be the most modern country in the world. This period has later been called ?the time of the big programmes?. One of the parts in this building of a welfare society was a large policy of building politics with few counterparts in history.

The purpose with my project is to evaluate how Recreational Leaders use the outdoor environment, how much they use it and why. My method was to assemble the surveys which were answered nationally by Recreational Leaders. During my project I have investigated Recreational Leaders view on the outdoor environment by reviewing a survey. Those who answered the survey find that the desire to use the outdoor environment exists; they think that the benefits of moving the teaching process outside are plenty. The children receive fresh air, they get to practise manual ability and gross motor functions, stay healthy and are able to use their imagination and creativity.