Bakgrund: Kvalitetsutveckling inom vården pågår i hela världen. Internationell forskning indikerar att förbättringscoacher kan vara en framgångsfaktor i förbättringsarbetet. Det är i dag oklart hur man kan utveckla interna coacher till att stödja kontinuerliga förbättringar. Studien utvärderar ett lokalt, tvärprofessionellt coachprogam inom vård och omsorg i ett geografiskt område i Sverige med en etablerad samverkanskultur. För att främja ökad kundcentrering ingick en pensionär i programmets planeringsgrupp.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

Together with Attends in Aneby a thesis of 15 ECTS (credits) have been undertaken. The assignment was to develop a new incontinence product for single use. Users of the product value comfort, flexibility, softness, comfort and a discreet product. Users are for individuals with incontinence problems that usually receive the products via prescription. The product must also have an attractive price and good quality from the purchase / originator's perspective.Currently there are two models that Attends supplies, which the project intends to develop, (Slips / Briefs and Pull On's).

VBG Produkter AB is a process-orientated company that develops, manufactures and markets trailer couplings with belonging coupling equipment, protection equipment against skidding and stands for wagon-bridge for heavy vehicles. The company feels that their set-up time in production for couplings is not at an acceptable level. Due to high demands of customer oriented production the intermediate stock level of included products within the assembly of couplings has gradually increased which has resulted in high inventory holding costs. VBG Produkter applies Kanban in their production, therefore it is important to produce exactly the necessary amount and avoid overproduction. The objective of this project is to suggest appropriate solutions so that VBG Produkter is able to reduce their set-up time in assembly of couplings, by identifying internal and external set-up time for the chosen process bushing cell.

This report aims to suggest recommendations that will increase the efficien¬cy in theconstruction process of a construction project. Through interviews, studies of budgetcalculations and examples given by the project management at the construction sightsan understanding of some complications have been gained. These complications havebeen tracked back in an attempt to find the source of the problem, and at the end ofthe report some suggestions have been presented with the pur-pose of preventingthese complications. Through the interviews it is suggested that many complications re-late to lack ofcommunication and motivation due to poor planning be-fore and during theconstruction process, a suggestion that is supported by the study of the budgetcalculations. The examples from the project management also points out someshortages in planning, but also coordi-nation related complications due to lack ofcommunication. To prevent these problems the recommendations suggested at the end of thisreport aims to improve the planning process through a properly fulfilledwalkthrough-planning of all of the construction activi¬ties during the time needed todo so. It is also suggested that the company uses experience from previous projects inorder to reduce costs, and that the qualifications of the employees is being appliedwhere it is needed.

The main reason for this project is my interest of our environment. What are our two largest grocerychains doing to maintain our environment? The aim of the project is to show the consumer which similarities and differences there are between ICA and Coop. My questions are: What are ICA and Coop doing to satisfy the demands to preserve our environment, are they going further than they have to? What do they think is important? Environment, price, consumer friendly? Answers: ICA and Coop are working to keep up with the demands, but are they doing more than they have to? The branch is a close world; it's hard to get impartial information. They are turning towards different consumer groups. ICA and Coop has different ways to interest consumers, ICA points out the importance of the meals, while Coop points at the environment. New questions has risen during my work: How far will their own brandnames go? Will ICA, Coop and others have their own farms, producers and suppliers? How can the consumer be protected? The competition will decrease with an increase of their own brandnames..

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this master thesis has been to explore how Skanska Installation can be organized and managed from a Feedback of experience perspective, and define how an IT solution for knowledge management can be designed by identifying the company's current needs in communications, structural capital and information management.The study follows a deductive approach with a qualitative starting point. Using the literature  studies  the theoretical references were built, which is of great importance when using  a deductive approach.Furthermore the report is based on a case study on two different projects: Herrgården and Nattsländan. With the collected empirical data from the case  study the analysis was carried out with the theoretical framework as a basis. This finally led to the conclusions of the study.The purpose of a communications plan is to show how the communication between employees must be managed to best move the project forward. Emphasis is placed on the formal and informal communication of the company.

This report will present athesis on behalf of Eleiko Sports AB and carried out by two students at the InnovationEngineering (University of Halmstad). In this report the project participants willdescribe the project background along with the current product issues andneeds. A clear structure for participants, stakeholders and information flowbetween these parts will be included in this report so that you can clearly seethe areas of responsibility. The report includes a timetable which the grouphas worked along and also methods used. In the development process you will beable to read about how the students in an interdisciplinary way have used themethods and come up with an entirely new product.

The primary purpose of this degree project was to investigate teachers conceptions about education for sustainable development and their education within the area. Teachers from Sweden and California have taken part and one of the aims with this study was to look if any differences could be found depending on what country the teachers came from. Therefore, this study has used a qualitative approach where conception maps and interviews have been used to get a result. Furthermore, the result showed that none of the differences that was found can be linked to the participants home country. The study also showed that several of different teaching traditions and educations philosophies was represented.

This is a report founded on a project by Atlas Copco called NYSTAB.  The application Nystab is a calculation program that can calculate the stability of the rockdrill-rigs made by Atlas Copco. The original version of Nystab is stored in a database from 1997 and the code is made in an old version of Visual Basic. My assignment was to develop the application in to a newer programming environment and make it last better in the upcoming years. The software I decided to use to accomplish this project is C# .NET in Visual Studio and Microsoft Access 2010. All the code is written in C# with some insertions from ADO.NET which helped me to easier connect the code with the database.The coding part was split into two pieces; the first was to develop the application scale done with Windows Forms, the second was to write the code for calculations in the application.

The purpose of this master?s thesis was to find problems that occur in the production line at Atlas Copco Rocktec Division, in order to decrease the costs of defect in quality. When the problems were distinguished, the authors ought to choose the problem with the highest improvement potential. One request from the constituent at Atlas Copco Rocktec Division was to connect the improvement to the document The Way We Produce. The document provides information and values about Atlas Copco and consists of 10 principles to be able to reach their vision.

This is a final project which makes up 20 credits at the Landscapearchitecture programme at SLU in Alnarp. The thesis is design based. My final project is comprised two parts; of a competition entry for ? A New Square in the Centre of Täby? as well as a theoretical study that derives from the competition proposal. The competiton itself was announced on March 1st 2007 with the final hand-in date on May 28th 2007. The program of the competition asked for a flexible urban square that offers a diverse range of activities that can be used during both night and day, all year around. I became interested in the term ?mutlifunctionality? and I went on to use the subject as a base for my design approach.