AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

This study began with a mission statement from the firm Tobii Technology AB to identify customer needs in the relatively new and rapidly growing market for eye tracking analysis. After consuling external experts, the authors however found that the availability of previous academic published market studies of new and fast growing markets was poor. Therefore a decision was made to execute the task and at the same time create a methadology for future studies in this area. The identification of customer needs, which formed the basis of the insights and analysis, led to frequent discussions between the authors and the firm's supervisors. This resulted in a project plan and a decision that an iterative model would be used, were earlier decisions would be questioned and refined throughout the project.

We are surrounded by things. They have their own personalities. Some evokes our emotions. We want to own them. We develop strong relationships to each other.

This study is an investigation of a sub community within the community of Hovsjö. The local government has financed a project in Hovsjö which is intended to bring about positive development. The prior object of this paper is to describe the project, it?s planning, it?s methods, it?s carrying through, and it?s goals. This study presents the district of Hovsjö in Södertälje.

In this project I have worked with creating a new kind of room in a hospital enviroment for children. The main purpose of the project has been to form a secure and positive experience for the patient while visiting a specific room at the department of childrens physiologi, at Drottning Silvias Children- and youth hospital in Gothenburg.The project was based on questions like how it is possible to move the focus from the unsecure and scary, to something secure and positive, when the patient is going through an testing situation.The target gruop included a wide age span (0-16 years old), therefore I have worked with a theme, H2O, that works for diffrent ages. In the room, I have applicated the theme in different levels that is changeable depending on the age of the patient.During the project I have presented my ideas for the staff at the hospital. We have discussed their problems, what they wish in their working enviroment and how they experience the situation for the patients. I have also asked the patients how they experience the specific room today.The result of the project is a visual idea of how you can create a room, that you don?t exepect to find in a hospital..

In this project forging of aluminum alloy Al 6026 T9 has been performed in the temperature range of 400 °C ? 470 °C. The alloy which was in the shape of a cylindrical billet was formed in a press with the aim of analyzing the effect of different forging temperatures and required press load for optimal die filling. The component?s dimensions were later measured and compared to a reference piece.

There are different ways of developing a second language. The purpose of this qualitative study is to investigate whether and possibly how music, focused on singing, can improve the development of Swedish as a second language. Through interviews with three vocal teachers, from three different schools in Sweden, and observations of one of the vocal teachers, information about how they work and think about the subject has been collected. The vocal teachers teach groups of second language learners by singing songs made especially for second language learning. The vocal teachers consider singing beneficial in the development of the pronunciation and improvement of the prosody, which affects the students? capacity to sound like a native Swedish speaker.

BillerudKorsnäs is a leading global provider of primary fiber-based packaging materials and on Gruvöns Bruk in Grums, they have chosen to invest millions in the boiler at the facility to increase the total capacity of the factory. This results in the Pulp Flash Dryer at Gruvön being burden more, which makes it important that it is of great reliability and can be run with a high capacity. The reliability of the Pulp Flash Dryer at Gruvön is not as good as one could hope, which leads to reduced availability and production, as well as to increased maintenance costs. There are a number of different reasons for this, but all the casual links are not known.The purpose of this project was to perform a system analysis of the Pulp Flash Dryer to identify bottlenecks and the most critical parts from a capacity- and availability perspective. Appropriate methodology for the system analysis was used and would be used in a structured way to perform the analysis with data from the process and the maintenance system.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

In companies today, it is becoming more and more common for employees to work in a project based environment, as a result many companies have developed their own project models. Companies with a well developed product culture are striving to improve their existing models, and businesses relatively new in the marketplace are aiming to reach a high level of maturity as well as reach high levels of efficiency in the shortest time possible. As the number of mature and efficient companies with well developed project model increase, so does the level of competition in the market. Since a well developed project model often leads to a more efficient and accurate way of carrying out the project, which in turn leads to shorter delivery time towards the client. This is crucial as time is one of the most valuable parameters of competition in today?s business environment.

Problems: How does Volvos CE: s four Swedish plants work with investment appraisals? Does the work differ between the plants? If differences exist, what can be improved in order to make the work more uniform?  Purpose: To map the work with investment appraisals at Volvo CE: s four Swedish plats, to analyze differences in work between the plants and give proposals to a more homogenous working.Method: A method of qualitative nature. The study mainly contains raw data from semi structured interviews. Secondary data, such as internal policy documents and documentation of completed investment projects, has supplemented the raw data. Analysis: The mapping shows significant differences in work with investments between Volvo CE: s Swedish plants.

This report tries to discuss the concept of social sustainability; what it means and how residential development can be made more socially sustainable. This is done by interviewing several and various representatives in JM AB, the municipality of Uppsala and residents of Åriket to explore how JM AB as a housing developer and the municipality are working with issues regarding social sustainability and what the residents in one of the new housing projects themselves think of these issues. The result of these interviews will be compared and analyzed with the prospect of finding common variables and hopefully ways of improvement.This will result in our own recommendations of areas of improvement either by broad initiatives or specific actions to increase the social sustainability. Areas such as meeting places, sustainable functions and joint efforts between different parties. During the work on the report we come in contact with several other areas of interest that we are not able to process ourselves and therefore recommend them for future studies..

The importance of good information security and safety grows larger and larger for each day in the information society of today. This concerns citizens, companies and public authorities. At the Swedish Transport Administration, the operation of an information security and safety process has evolved over the years to guarantee that the public authority can be trusted by its citizens, cooperating companies and other public authorities. This responsibility has been assigned to the Information Security and Safety Department (Informationssa?kerhetsavdelningen, ITsa?).In this thesis the aim is to review to what extent ITsa? achieves any business benefits for the Swedish Transport Administration, and to analyze, streamline and come up with solutions to improve their workflow.

BACKGROUND: Project based structures has become more and more common in the organizations of today. As the project based structures are given a more central role in the organizations the interdependencies between the projects are getting more attention. These structures need a new type of control to meet the unique challenges that arise. The researchthat has been done has been concentrated around the project form and the projects internal control, the area of multi-project management is therefore relatively unexplored. The few existing studies on the subject focus on projects in the construction industry why research inmore complex fields of business have been requested.PURPOSE: The purpose of this thesis is to explore and analyze how knowledge intense multi-project organizations manage their project activities, and to determine how different organizational characteristics affect the need for management control systems.METHODOLOGY: The empirical data has been collected through interviews with personnel in BT Products R&D, Gambro R&D and AstraZeneca Development.