Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.

The overall aim of this study is to achieve the increased knowledge of the use of the counselling methods in the student counsellors' work and to find the possibilities for development. Two questions are used as guidelines:Which counselling methods do student counsellors use in their work in schools?How can the current education for the student counsellors be supplemented?The analysis of the interviews with six counsellors in Stockholm's administrative province showed that even uneducated counsellors use the same counselling methods as the educated ones. All these methods which are used remind of the known counselling methods that are the part of the current education for the student counsellors.In general counsellors experienced that the education for the counsellors should be supplemented within the field children with special needs and that conversation's methodology is the essence of the counselling work..

This report describes the development of a high-voltage connector at the request of Scandinova Systems AB in Uppsala. The development process is described from the making of a customer demand specification, to the making of drawings for the manufacturing of prototypes. Scandinova develops high-voltage modulators, hence the need for connectors that can handle very large power pulses. Their current connector has several weaknesses that may cause the connector to melt or catch fire. The development began with a number of studies that included the modulator structure and the current connector structure and functions.

The current study sought to examine if post-produced semantic memory cues are a good aid for memory recall. It also focused on remembering units with a meaning, instead of just remembering lists of words. In the current study a factual text was used where the participants were tasked with recalling as much information as possible either with the aid of cues (keywords written by the participants themselfs), computer with Internet or no aids at all. The results showed that keywords are significantly better for memory recall. The results were discussed in regards to modern models describing semantic memory.

Conqueror for Indigo is production treated with an active chemical to maximize the ink adhesion.ArjoWiggins has found that another chemical, the candidate compound, would improve the propertiesof the paper. ArjoWiggins therefore wish to replace the current compound. To strengthenthe patent requirements for ink adhesion needs to be determined. A theory is developed to whychemicals with certain properties maximize the ink adhesion. Experiments are performed but theresults are inaccurate.

Abstract The main subject of this essay is conflicts at work and the effect it has on the employee´s health.  I can through various reports read that bad health at workplaces is too high and that conflicts are a reason. What can be done to the work environment so it will be better from a psychosocial perspective? Sweden has a regulation that makes the employer responsible to work for an improvement in the work environment; can these regulations be used in purpose to reduce conflicts?My first question concerns the possibility to establish preventive procedures in the workplace systematic work regarding to improve the work environment. My second question is about the obligations of the employer to attempt to reduce conflicts at the workplace and the third question regards the documenting and monitoring of conflicts and the preventing work to reduce them. The purpose of this essay is to clarify how conflict preventive work can be included in the Systematic work environment management.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

The assignment is issued by Scania Maintence AB seeking a new approach to detect power changes in their industrial processes. The work has taken place at Ångströmslaboratoriet and tests have been performed at Scania AB Södertälje.Today?s society consumes enormous amount of energy. In both economically and environmental view, it is important that the processes are effective, with high power factor. There are many ways to measure power in the industry, what they all have in common is that the installation is advanced, requires time and planning.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Modern technology and fast development of heat pumps, the hunt for savings in energy consumption and the strive for environmentally friendly energy sources, convenience, and financial profit, have made heat pumps a reasonable alternative for the heating of houses.When the heat pump starts it will consume a considerable amount of current, which may result in a short-lived voltage-drop if the power grid is weak compared to the start-up current.The company Fortum Distribution which owns and administrates electrical network is interested in an investigation that deals with heat pumps affect on the quality of electricity.The purpose of this investigation is to study fast electrical fluctuations (flicker) as a result of start-up currents for single as well as multiple heat pumps on the same electrical station and from this evaluate whether there will be any problems installing heat pumps..

The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.

With growing economies and better living standards in many parts of the world today, there is a need of expanding the capacity of generating electricity. The alternatives for renewable energy technologies are not fully developed and have still some problems to conquer.The company Minesto has developed a technology that is called Deep Green. It is designed to gain electricity from tidal currents. Deep Green works in a similar way as a kite that is attached to the seafloor with a moving wire. It contains of a wing that moves due to the water current.

Arvika Smide is a supplier to the automotive industry with a focus on advanced drop forgings including powertrain and bearings. The great experience and high quality is Arvika Smide?s speciality. Today's competition in the industries puts high demands on the efficiency where each company has a quest for perfection.Arvika Smide has been through the thesis of Karlstad University, called for a situation analysis of aftertreatment whose effectiveness has not been fully desirable. The department includes the production steps blasting, quality control and packaging.The thesis contains the results from the situation analysis and comparisons of the calculations for selected reference period Q4 2009th.

Youth crime is a subject widely discussed in media as well as in the academic field of criminology. One of the topics within the research field of youth crime discusses how to effectively help young people leave a criminal lifestyle behind. It is within this topic that the focus of this essay lies. This qualitative study examines a community based program in the Swedish city of Malmö called Nya Vägvalet (The New Choice of Path, own translation), which works with juvenile delinquents and the issues that surround the youths lifestyle. The aim of the essay is to explore the foundations and methodology of the program, how the methods of the program are put into practice and how these methods compare to what current research findings claim to be effective factors in successful interventions.