The purpose of this thesis is to analyze and propose improvements to the current procedure for cost estimations of purchased maintenance work at Banverket, the Swedish rail administration. This governmental institution is responsible for the procurement of maintenance services for the country?s railroad network through open tenders. Due to the generally low number of contractors, it is particularly necessary to establish accurate cost estimates in order to assess the offers and ensure that a fair price is being paid to the suppliers. Several flaws associated with the current practice are identified and analyzed according to cost accounting theories.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

The majority of all power cuts that affects individuals and communities are caused by earth faults on the power transmission lines at 10kV and 20kV level [1]. If these power cuts could be eliminated, less disturbances and interrupts would lead to large amounts of money savings.Swedish Neutral has developed such a protection system. When an earth fault occurs power is injected into the neutral point of the transformer. The RCC (Residual Current Compensation) protection calculates a compensation current exactly 180 degrees out of phase to the fault current. Doing this, the voltage at the fault location becomes very close to zero, without affecting the power transmission.The protection system can only compensate automatically for the fundamental frequency (50Hz), and manually for the 3rd, 5th, 7th and 9th harmonics.

The City of Gothenburg has an urgent need to upgrade its public transport. The capacity of its light rail transit (LRT) has reached maximum capacity within the inner city limits years ago. The construction of an underground metro will be very expensive and time consuming due to the soft clay beneath the city. The apparent need of developing another type of mass rapid transit (MRT) is urgent. An elevated metro have turned out to be a success in Greater Vancouver, but is it possible for the system to operate well in Gothenburg with its narrow streets and current land use; will its route coexist with the current LRT or will the noise disturb people too much?.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

This master thesis describes the development of an UPS module. UPS is an acronym for Uninterruptable Power Supply. The UPS module has been developed at the company AerotechTelub AB. The UPS module delivers the necessary voltage and current in case of a power interrupt. If a power interrupt occur, the computer system has one to three minutes available to store data and shut down correctly.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

The object of this master thesis was to examine the significance of fairy tales for children and the extent which children today are able to share fairy tales through the activity of the libraries. The main question was: how current were fairy tales at the investigated libraries activity for children and how current were fairy tales in todays book publication? The qualitative methods used were in the form of interviews, statistics and source studies. The theoretical literature in this thesis described the folkloristic context of the fairy tales. There was also a psychological and a pedagogical view of the possibility of the fairy tales.

Inertia is often described as an unavoidable state that organisations reach when they grow to a certain size. Theorists present a number of different phenomenons, which together create the foundation for inertia. This study deals with the apparent resistance that appears among the large Nordic betting companies with regards to establishment on the electronic sports (eSports) market. The analysis is based on how the old phenomenon inertia takes place in young and seemingly flexible industries. This area has received limited coverage in current theory on inertia.

The current study sought to examine if post-produced semantic memory cues are a good aid for memory recall. It also focused on remembering units with a meaning, instead of just remembering lists of words. In the current study a factual text was used where the participants were tasked with recalling as much information as possible either with the aid of cues (keywords written by the participants themselfs), computer with Internet or no aids at all. The results showed that keywords are significantly better for memory recall. The results were discussed in regards to modern models describing semantic memory.

Arcoma is a company that develops and manufactures X-ray equipment for hospitals. One of the most crucial components is the digital detector. Due to the high cost it is made removable so it could be transferred and used in other X-ray apparatus. The detector is placed in a so called detector holder. The current detector has a rectangular shape which sometimes requires a 90 degree rotation to match the shape of the patient.

This bachelor thesis aims to analyse the Swedish mortgage market and investigate whether it is in a current price bubble or not. Comparisons have been made with Denmark, a country with a market similar to Sweden?s, and where the mortgage market faced a price bubble that crashed in 2008. The housing market in Stockholm has been analysed as a separate market, as it differs from Sweden as a whole in prices and underlying factors to increased prices. The conclusion of this thesis is that not Sweden, nor Stockholm, is currently in a price bubble at the mortgage market.

The current planning philosophy is based on a political utopic modernism founded during the first part of the 20th century. The focus is, in planning a defined area, to maximize the internal efficiency and to create a competitivesociety. During the latter part of the former century globalization changed the context, thus creating the need for a new way of approaching physical planning. This paper shows that the historical and philosophicalmetaphor of flow can be applied to meet the demands in the global city. It also shows how the edge, as where interaction takes place, is an important part of the content that has to be defined.