Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Syfte: Syftet med uppsatsen är att beskriva och analysera hur kommunala energibolag resonerar vid val av avskrivningsmetod samt hur kommunala energibolag har förberett sig inför införandet och hur de förhåller sig till implementeringen av komponentavskrivningar.Teorier: De teorier som använts i uppsatsen finner vi vara relevanta och applicerbara utifrån studiens syfte och frågeställningar. Vi har bl.a. använt oss av Burns & Scapens ramverk som ingår i den institutionella teorin, vilket är den teori som studien utgått ifrån.Metod: Studien utgår ifrån den kvalitativa ansatsen med hjälp av semi-strukturerade intervjuer och dokumentgranskning.Empiri: Empirin innefattar intervjuer med 5 kommunala energibolag inkluderande granskning av relevant dokumentation.Slutsatser: Studien har visat att de kommunala energibolagen upplever avskrivningsval som en svårbedömd process som präglas av en inre tröghet på grund av påverkande faktorer och inrotade regler och rutiner. I och med tolkningen och införandet av BFNs regelverk avseende komponentavskrivningar har ett internt motstånd byggts upp på grund av svåra och godtyckliga bedömningar. Detta har bidragit till en spretighet, vilket har påkallat behovet av tydligare rekommendationer och direktiv.

Abstract The IT- business is a fast growing business trade. This expansive line of business continuously demands flexibility both economically and legally. It is, today, of great importance to have knowledge about your own trade especially when it comes to new agreements. Laws and regulations are seldom flexible and adaptable tools, this is due to the fact it takes time to create new laws and, above all, it takes time to create laws with the right effect. This is where standard agreements enter the scene.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

As break downs of production transformers are costly and often result in long outages it is essential for reliability of operation that the transformers are manufactured to be robust. The aim of this M.Sc. thesis is to investigate if deviations should be made from the standard IEC 60076 ? Power Transformers in order to describe a robust large power transformer for procurement.The investigation has been conducted in three stages. In the first stage a definition of the term robust was developed in consultation with the client Vattenfall Vattenkraft.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Problemet med dagens standard för hygienrum och dess komponenter är att de baseras helt på tillgänglighet. Vilket i och för sig är en bra sak, sett utifrån att fler personer kan ha möjligheten att utnyttja bostadsfunktionerna även om de har vissa rörelsehinder. Men vi vill ta steget längre, inte endast se till tillgänglighet utan även se till vad som kan uppskattas, för att höja levnadsstandarden och uppskattningen av våra hem. Den svenska standarden är som tidigare nämnt baserad på tillgänglighet och är inte alltid anpassningsbar till nya lösningar och komponenter som kan förekomma i badrum, vissa saker ändras, får nya funktioner, kanske utökade användningsområden. Syftet är att försöka utöka möjligheten att nå högre kvalité för badrummet och samtidigt försöka se till de alternativa lösningarna som kan åstadkommas idag.

In the beginning of the 21th century several successful companies filed for bankruptcy. These bankruptcies have been known as large accounting scandals and the largest scandals did Enron and Worldcom stand for. These bankruptcies arose without any warning signal from the auditors about the companies? financial problems and their inability to continue as a going concern. The bankruptcies damaged the reputation of auditors and broad criticism has developed at the auditors? inability to discover companies? financial problems and their unwillingness to reveal a going concern opinion in the audit report.

Companies today are facing more and different kinds of demands from the society and their stakeholders. It is no longer enough to just deliver the products, and not just the quality of the products that matter. The consumers are getting more conscious about the many ways in which companies affect the society and the environment in which we live. The financial sector, that among others includes stakeholders such as insurance companies, banks and fund companies are starting to realise the importance of the non- financial issues that companies are encountering. Analysing the companies sustainability when it comes to social and environmental issues, has become an increasingly important factor when for example choosing companies to invest in.

En central del i ett systemutvecklingsprojekt är de tekniker som används för att strukturera organisationer och informationen i dessa. I flera årtionden har traditionella tekniker utvecklats. Exempel på tekniker som anses traditionella är ER-modellering och dataflödesdiagram. Idag används objektorienterade programspråk mer och mer för att implementera databaser. Det har dock inte funnits stöd för att analysera ett system objektorienterat förrän i början på 1990-talet.

The companies of today figures on a hardly competitive market. This makes it necessary for the company to find new way to create competition advantages. Since it is no longer enough to compete with the technical quality of the product the companies are forced to also enhance the functional quality. To accomplish this it becomes necessary for producing companies to be customer oriented. A customer oriented company culture can be reached with the help of internal marketing in which different activities work to inform and teach the employees about the company strategy and also about their own role as part-time marketers.This thesis examines Electrolux, a company which is currently striving to develop a customer oriented company culture.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Bakgrund och problem: IFRS 8, rörelsesegment, är ett resultat av det samarbetsprojekt som pågår mellan de två dominerande normsättarna på redovisningsområdet, International Accounting Standards Board (IASB) och Financial Accounting Standards Board (FASB). IASB offentliggjorde i november år 2006 IFRS 8 som ersatte IAS 14, segmentrapportering, för räkenskapsår från och med 1 januari år 2009. IFRS 8, har till skillnad från IAS 14 ledningsperspektiv på sin segmentrapportering i de finansiella rapporterna, vilket kan bidra till lägre jämförbarhet mellan företagen och högre relevans.Syfte: Syftet med studien är att identifiera skillnaderna mellan IAS 14 och IFRS 8 vad gäller antalet segment, mellan årsredovisningen för år 2008 och första kvartalsrapporten för år 2009. Syftet mer konkret, är att undersöka om företagen i studien har förändrat antalet segment samt om det påverkat jämförbarheten.Metod: Urvalet för studien är de 255 företag som var listade Stockholmsbörsens listor Large Cap, Mid Cap och Small Cap den 9e november 2009. Studiens är en jämförelse på företagens förändring i antal rapporterade segment mellan årsredovisningen år 2008 och första kvartalsrapporten för år 2009.Resultat och slutsatser: Författarna kan inte statistiskt säkerhetsställa att en förändring skett i antalet segment.

The aim with this study is to understand how social workers at the individual- and family sector think about child poverty and how they work with and reason about the preventive and facilitate work they do for financial vulnerable families. We have in our study used qualitative method through semi-structured interviews with social workers at the individual- and family sector to answer our purpose. The results showed that child poverty is a concept hard to define and not well established. The social workers have divided views on child poverty but still at the same time mean that it exists amongst the families they meet. There is also a big difference between municipalities and their reasoning on what a reasonable standard of living is for a financial vulnerable family and how they work with preventing child poverty.