Arbetet gick ut på att designa och programmera en prototypmobiltelefonmodul till HandyBlue, ett omgivningskontrollsystem för personer med funktionshinder. Rapporten går igenom de olika momenten i modulens utveckling som marknadsundersökning, expertintervjuer, design och implementation och fältester.Programmet fick bra betyg i fälttester och ansågs av samtliga testare som lättanvänt och intuitivt. Slutsatsen är att  genom att hålla målgruppens önskemål i fokus och låta tänkta användare vara delaktiga i utvecklingen i ett tidigt skede, blir slutresultatet en modul som väl uppfyller de krav som ställts på den..

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

AbstractAt the UN Conference on Environment and Development in 1992 the nations stated that traditional environmental policies were not sufficient to handle the multidimensional challenges posed by sustainable development. Governments needed to broaden their political decision making procedures in order to coordinate and integrate environmental, social and economic policies. Therefore a new tool was introduced in Agenda 21, National Strategies for Sustainable Development (NSDS). The aim of an NSDS would be to bring together actors from all parts of society to jointly reach a consensus on how to work towards the vision of a sustainable society. An NSDS would be seen as a strategic tool to help focus national policies for SD.

Today?s society is one where technological advances are made daily, which increases the need to stop and assess the risks against users? integrity when integrating new technology in contemporary systems all the greater. We have taken two technologies, Near Field Communication and Certified Wireless USB, whose envisioned area of use is to be integrated into mobile phones, and evaluated what security threats are revealed for the respective technologies. The threats against security have been identified through research of the standards and existing reports for each technology. Practical experiments have not been conducted on account of us not having access to any equipment to run such trials.

Different techniques for precision agriculture have been available during the last decade. Some of them are more widely used than others. The main purpose of this thesis was to investigate the different attitudes to precision agriculture that exists among farmers and advisors in Sweden. Eight advisors and sixteen farmers were asked for their opinion of a number of specific techniques for precision agriculture, such as yield-mapping, precision liming, the Yara Nitrogen Sensor and site-specific fertilization with phosphorous and potassium. They were also asked to describe the way in which the counselling in Swedish agriculture is used and also about it's importance for the adaptation of new techniques. The high costs are mentioned to be one of the most important reasons why precision agriculture hasn't been more widely spread. Several farmers refer to their farms as too small to bear the costs that come with the techniques. The individual interest for technique among the potential users plays an important role.

This report is a bachelor's thesis of two students from the Energy and Environment degree at KTH Stockholm. Grinda is an island situated Stockholm archipelago. Skärgårdsstiftelsen is landowners and manages the area. Grinda Wärdshus, a guest house located in the island, currently uses an oil-fired boiler as a heating system. The aim of this thesis is to investigate whether wood chips or pellets is, from a sustainability standpoint, a suitable heating method for the guest house.

Syftet med denna uppsats är att granska hur ett företags arbete överensstämmer med lean service samt ge förslag på hur verksamheten kan förändras för att bättre arbeta enligt lean. Detta görs inom ett begränsat område av företagets serviceverksamhet, hantering och rutiner av nycklar. Studien utförs i ett företag i hiss och rulltrappsbranschen som arbetar med allt från tillverkning och montering till underhåll.Arbetet utförs genom intervjuer med anställda med god spridning av befattning och arbetsuppgifter och observationsstudier av serviceverksamheten i aktuell organisation samt viss benchmarking med annan verksamhet som upplever samma problem.Studien visar att verksamheten har tillgång till en rad verktyg som enligt många definitioner karaktäriseras som lean, men benämns internt till viss del under andra namn. Vidare kan det konstateras att dessa verktyg och rutiner inte implementerats till serviceverksamheten varför lean inte i dagsläget anses tillämpas. Utav detta kan slutsatsen dras att det inte är tillräckligt att utarbeta och ha lean-verktyg tillgängliga för att lean ska tillämpas.

The purpose of this study is to get the cadastral procedure for condominiums to become more affordable. The aims of the study is to examine how the number of condominiums, the number of joint facilities and the number of joint property units that are formed in a condominium cadastral procedure in Sweden influences the cadastral procedure cost. To get an overall perspective the study also explores how the chosen forms of co-operation have worked out in association management.A condominium is a type of three-dimensional property unit, which may only contain one residence.  This form of property formation has been allowed in Sweden since 1 May 2009.  At the end of 2014 less than 1000 condominiums had been formed despite the legislator?s expectations for 3000-5000 condominiums a year. The property unit can have access to necessary facilities, not available within the property boundaries, by establishing joint facilities or form joint property units.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Sweden is a country that has made some progress in developing energy efficient solutions. The problem in Sweden is that many houses and apartment buildings are old and have inefficient ventilation- and heating systems. This energy is lost when systems are inefficient, which then results in huge economic costs. Luckily, more and more people are becoming aware of this, which means that Sweden is on track to become even better within energy efficiency.Energy use for the housing- and service sector amounts to 166 TWh of total use at 616 TWh. Without distribution and conversion losses, these figures show that the housing- and service sector accounts for almost 40 % of the country's total energy consumption.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

There are today large amounts of contaminated sediments in the Baltic Sea. These contaminants are the result of many years industrial activity where the contaminants have not been taken care of and just released out in the water. When ports want to dredge in their fairways and harbor areas the contaminated sediments need to be considered since they are a environmental risk. The development in this area has been slow and new techniques have just recently made its way into dredging operations in the Baltic Sea region. As a result of this there are no clear methods for implementing new techniques today.