This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To Implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

The purpose with this essay is to study how companies use the repositioning process and identify the risks involved from a business perspective. We have chosen to base our essay on the following research questions:What reasons are there for a company to initiate a repositioning?, What does it mean for companies to Implement a repositioning?, What are the risks with a repositioning?We have used a qualitative research method and have chosen to interview six respondents which in various ways are actively working with brand repositioning. Our study has been Implemented with and deductive character.The most important conclusion that we observed after Implementing our study is that repositioning is a high-risk project. Instead of changing their entire brand image, companies should instead make small changes and revitalize the brand by developing the strength that already exist.

St. Jude Medical Inc is one of the worlds leading companies in the medical technology area with cardiovascular devices as its specialty.Manufacturing implantable medical devices such as Pace Maker Electrodes requires complex design, safe processes and well trained operators. User friendly manufacturing operations are a necessity.Lately there?s been an increase of the manufacturing volume which also increased the number of operators. More operators need to be trained and cross-trained.

Wireless sensor networks have the potential for becoming a huge market. Ericsson predicts 50 billion devices interconnected to the Internet by the year 2020. Before that, the devices must be made to be able to withstand years of usage without having to change power source as that would be too costly. These devices are typically small, inexpensive and severally resource constrained. Communication is mainly wireless, and the wireless transceiver on the node is typically the most power hungry component.

Humanitarian intervention is a concept that generates several problems in our time. The idea of humanitarian intervention concerns the modern norms of sovereignty and noninterventional principals. It also concerns the conventional norm, which declares that states are not allowed to interfere in other states? internal affairs. The use of military force to Implement humanitarian intervention is restricted according to international law.

The concept of sustainable development has been pervasive in recent years and many organizations choose to Implement sustainability and adapt their activities accordingly. The purpose of this study have been to explore how a collaboration on the use of waste materials may look to analyze what influences cooperation. A case study has been carried out examining a Swedish state regional project aimed at creating partnerships between actors and utilizing textile waste with the help of design. The study was conducted using qualitative methods and the collection of data has been done through interviews and by examining documents. The results show that there are seven key factors that affect cooperation: expectations, commitment, internal communication, a strong non-profit actor, individual treatment, personal networks and the diversity of actors.

Detta examensarbete syftar till att Implementera en modulgenerator som automatiskt genererar ett matchat differentialpar. Detta för att enkelt kunna generera detta vanlig förekommande byggblock utan att behöva rita om allt från grunden. Modulgeneratorn som konstruerats klarar att skapa upp till 2x2 transistor block matchad layout med eller utan sköld. Programmet skapar med hjälp av indata från konstruktören en skräddarsydd layout som kan användas som byggblock i integrerade kretsar. Examensarbetet är slutfört och har genomgått omfattande testning The aim of this thesis is to Implement a module generator that automatically generates a matched differential pair.

This thesis work contains a litterature study about electrical motors in general and how PWM-patterns for brushless DC-motors can be made. A suitable method has been Implemented as a simulation model in VHDL. A simulation model of a brushless DC-motor which describes the phasecurrents, torque and angular velocity has also been made. The motor model made simulations easier for the complete PWM-system. The design was synthesised and tested with a prototypeboard including a SPARTAN II FPGA.

The aim of this paper is to see if Sweden has Implemented the recommendations and taken notice of the guidelines for employment that the Commission and Council set up every year and from this see the role of the Commission and Council for the national employment politics. The years that I focused on in the paper are year 2000- 2004. The method that is used is a case study research that is exploratory and explanatory. The theoretical starting points are theories about delegation, cooperation and a variation of control and autonomy. This is recognized in the Principal- Agent theory and the Principal- Supervisor-Agent model.

The object for this study is a company developing and manufacturing vehicles for heavy transportation. The company distributes their products on a global market. Therefore the company is required to have efficient internal production development processes in order to successfully beat the competition. The purpose of this master thesis is to study how this particular company intends to Implement their standardized theoretical product development process within their organization and how well it is done. We intend to identify and specify if the process has any unexploited capacity.

My purpose is to describe and analyse how care managers experience their position as middle managers in the public sector. I have used a qualitative interview method to answer this question and also to capture my six interview persons opinion and understanding of their own position as middle managers. From my six interviews I noticed some difference in their opinions about how it is being a care manger. The results show that the role as care managers have challenges such as to intertwine their own notion how the caring of the elder should be with strict politic decisions. Other challenges are the limitation of economic recourses and reorganisations.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

Through this study we want to enlighten how different companies work with their internal branding and how well they succeed in this process. We also want to examine if there are any differences in this work depending on the companies market position. Following question is used to investigate this process;- In what way and how well are companies working, depending on market position to Implement and maintain their work with the internal brand?For the study a theoretical model was created based on our existing theory. The model contains three main variables; create, communicate and uphold; i.e.

One important issue faced by companies is to secure their information and resources from intrusions. For accessing a resource almost every system uses the approach of assigning a unique username and a password to all legitimate users. This approach has a major drawback. If an intruder gets the above information then he can become a big threat for the company and its resources. To strengthen the computer security there are several biometric methods for identity verification which are based on the human body?s unique characteristics and behavior including fingerprints, face recognition, retina scan and signatures.

As changes occur more frequently in IT- and software development, it is important for the companies to meet the demands and needs of its customer. The companies have to be able to adapt themselves continuously in order till fulfill its customers changing needs in an effective way, which results in big changes of the companies? structures. The more traditional way of working is often replaced with more alternative approaches as a response to the reputable deficiencies of its predecessors. As an effect of the rapid change and development some companies now see big potential in switching to more Agile and flexible methods and some companies have no choice but to change their way of working.