The market for heavy duty engines is constantly requiring engines that should be more andmore powerful, while still maintaining low fuel consumption. As a result of increasing enginepower, the engine and coolant temperature increases as well due to insufficient coolingperformance (because of design issues, cost etc.).Also, emission legislations, both current and future, require more and more measures to betaken by engine manufacturers. One way of meeting the legislations is the use of cooled EGR(Exhaust Gas Recirculation), which also lead to increased coolant temperatures.Both these factors also naturally lead to increased engine oil temperatures, the consequencesof which are not thoroughly investigated.This thesis project aims to investigate effects of high temperatures on engine oil degradation,with focus on the greatest degradation process: oxidation. To do this several engine runs havebeen performed on a 310 hp engine with EGR to see what happens to the engine oil in a realengine when exposed to high temperatures. During the tests oil samples have been taken andanalysed for important parameters.As a complement to these engine tests some laboratory oxidation testing have also beenperformed, to be able to compare engine test data with laboratory tests.One goal of the project was to try to formulate an empirical oxidation model, which would beable to predict oil oxidation levels in an engine, given any running parameters.

Syftet med denna uppsats har varit att undersöka i vilken utsträckning företag på Stockholmsbörsen följer IAS 36 p. 134, vilket behandlar nedskrivningsprövning av goodwill. Även vilka faktorer som påverkar denna informationsutgivning analyseras..

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

We set out to compare two different categories of workers: the, so called, white- and blue collar workers. The studies aim was to measure if there were any observable differences between the two in means of optimism and sense of coherence. There are two tools created for measuring optimism and sense of coherence, the Life Orientation Test ? Revised (LOT-R) measures an individual?s level of optimism and Aaron Antonovsky devised a test for measuring an individual?s level of sense of coherence (SOC). Optimism is best explained like a way to measure anticipation, how an individual expect future events to fall out.

This report present a working model for simulation of what happens to colors displayed on screens when they are observed through optical filters. The results of the model can be used to visually, on one screen, simulate another screen with an applied optical filter. The model can also produce CIE color difference values for the simulated screen colors. The model is data driven and requires spectral measurements for at least the screen to be simulated and the physical filters that will be used. The model is divided into three separate modules or steps where each of the modules can be easily replaced by alternative implementations or solutions.

The purpose of this study has been to examine how customers, by interacting with each other, can communicate and create the image of a brand. We find this topic to be relevant since there are no previous studies conducted concerning the customers influence on the brand image. Our ambition has been to describe in what ways and to what extent the customer can affect and influence the brand image by communicating with other customers. To fulfill our purposed we have targeted three important questions which are:? In which ways can the customer affect the communicated image of a brand?? To what extent can the customer influence the brand image and the perceived value?? Who has control over the brand, the customer or the company?For this study we have used a qualitative approach in which we have conducted eight personal interviews with brand consultants and the editor of the magazine Dagens Media which has given us the foundation for our analysis.

Prosody can be characterized as the rhythm and the melody of speech. Prosodic features convey emotions, thoughts and geographic origins of each individual. Spoken language without prosody would be monotonous, without variations in loudness and rate. Children with cochlear implants perceive speech in a different way than children with normal hearing. Consequently the speech produced by a child with cochlear implants may sound different.The purpose of this study was to examine prosodic skills in Swedish children with cochlear implants and to compare them with the prosodic skills in Swedish children with normal hearing.

BackgroundThe opportunity for cochlear implantation has now extended beyond children who are only deaf or hard of hearing. Children who are deaf blind from birth or early in life are receiving implants, but very limited research has been done for this population, and this raises important issues. AimThe aim of this study was to estimate the prevalence of hearing and vision impairment or deaf blindness in children with Cochlear Implants in Sweden and to investigate the diagnoses issues among these groups of subjects. Material and MethodSubjects with an age between 1-18 years were ascertained through multiple sources and almost complete ascertainment was achieved.ResultsA total of 77 subjects with a referring diagnosis of combined hearing and vision disorder or deaf blindness were ascertained. Out of those, 30 subjects were excluded.

The purpose with this study was to systematically examine scientific studies of audiologic group rehabilitation. The definition of audiological rehabilitation was explored, different variables that influence the result and how the outcome measures should be done and its relationship with the goals of audiologic rehabilitation. The method used was a literature study. Pubmed and Cinahl were used for the search of literature. Some articles were searched from scientific studies reference lists and also advice from the supervisor.The result from the different studies shows that the effect of rehabilitation varies as there are many aspects that have an affect on the outcome measure.

More than 1000 Swedish Warmblood foals are shown every year at foal inspections which are arranged around the country. Six traits are evaluated at these inspections: type, head-neck-body, correctness of legs, walk, trot and canter. No previous genetic studies have been done on the data from these evaluations. The purpose of this study was to do genetic analyses of the traits which are evaluated at foal inspections. The purpose was also to see if there are any correlations between the results of the foal inspections and the results from the tests of three-year-old horses.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

Environment friendly transports are one of the main topics in the industry and society today.Shell organizes an annual university competition called Shell Eco Marathon. The goal is to buildthe car that consumes the least fuel during a race. KTH participated for the first time in 2006.The engine for this competition, DoubleTwo, has been developed within the school. Theprinciple is a two stroke counter piston HCCI engine with variable compression ratio. HCCIstands for homogenous charge compression ignition.

The authors study the effects of brand salience on how consumers form brand attitudes and how consumers value the importance of various brand attributes. The study was conducted through two separate tests, the one focusing on the link between brand salience and brand attitudes and the other focusing on the link between brand salience and evaluations of attribute importance. Both tests measured brand salience as the ease with which brands are recalled by respondents who have been cued with a specific product category. The results show that brand salience has direct effects on both brand attitudes and the evaluation of attribute importance. As brands are recalled, high brand salience for a brand creates a more positive attitude towards that brand in the mind of the consumer.

This paper is about the extent to which simplified penetration calculations ofsmall-caliber projectiles is a useful tool for assessing the physical protectioncapability. The work should be seen as an attempt to create an accessible tool inthe form of a simplified equation that allows for a better and safer use of thenaval vessels. The tool will also be used at different levels so that decisions andinstructions could be clearer.Performed calculations show a very limited capacity of a ship's basic design interms of physical protection against the use of small-caliber projectiles.How do we know that the calculations correct? By verifying the calculations withpractical shooting tests, a substantial condition to answer the question will becreated. To shoot against a material with two different thicknesses estimated toproduce perforation and non-perforation is a good approximation of the equationusability in the context..

Introduction: Balance is a complicated term which includes a static, dynamic and functional part. These parts have, during a long period of time, been included into the existing training programs through several different balance exercises, which aim to prevent sports injuries mostly focused on the knee and ankle. In floorball these injuries are common and a sports injury prevention program is required.Purpose: The purpose is to explain the balance term and relate it to injury prevention training and the existing theories. A second purpose is to see whether five weeks of balance training increases the balance ability in female floorball players and thereby increase the test values in the two tests.Method: Twenty female floorball players participated in the study and were divided into a training group and a control group. They performed a Star excursion balance test (SEBT) and a Multiple single leg hop stabilization test (MSLHST) before and after a five week training period, containing exercises of balance.Results: The training group showed improvement after the training period, however only one significant result was found.