Marinediesel has, to meet there customers needs for a suitable sterndrive to powerboats, developed a prototype. The prototype is currently in the testing phase. The opportunity to test the sterndrive under load inside the workshop has not previously been possible. Until now the drive has been tested in a test bench without any load on the propeller axle. The prototype has also been tested under real conditions mounted on a boat.The idea with my thesis was to create a test bench that can run around the clock in order to be able to test things like wear and service intervals and other things that require that the test interval is long.

Aim/Objective: The purpose of this paper is to investigate and analyze the early effects that could arise between entrepreneurs and lenders in connection with the auditing requirement, which has now been abolished. Through, empirical data identify the impact from the credit provider?s perspective and small business perspective and then make an overall assessment.Method:The authors are to achieve the purpose for this thesis through the use of both primary and secondary data. Primary data gathered through interviews and secondary data in the form of earlier thesis as well as articles.Result and conclusion: Banks have not prepared for the change in connection with the abolition of the audit requirement. Lenders look at repayment ability as the most important aspect of giving credit.

Bachelor thesis in Business administration, School of Business and Economics at Linnaeus University, Controller, 2FE05E, spring semester 2013 Title: Non-profit sport associations management control- A multi case study of management tools Authors: Christoffer Ahlgren, Emelie Andersson and Emelie Nilsson Tutor: Anders Jerreling Examiner: Elin Funck Background: Non-profit sport associations activate a large number of people in Sweden and have a great impact on the social community. Because of the increasing complexity to operate sport associations some are experiencing serious financial problems. The daily financial work has a major impact on how the future unfolds for the sport associations. An adverse economy not only creates complications in the economic field, it also affects the sport itself. Purpose: Our purpose with this paper is to describe and explain how the economy is controlled in non-profit sport associations and the tool that is used to support this process.

In Sweden, lowest acceptable haemoglobin levels in blood donators are 125g/L for women and 135g/L for men for a test sample taken in the beginning of the blood donation. Levels, which are 10g/L lower, are accepted if the sample is taken after the blood donation. Earlier studies show that the haemoglobin level decreases for a person that is lying down.The two aims of this study were to examine how much the haemoglobin levels change during blood donation and to examine if the photometrical instrument Pronto-7TM shows equivalent results to that of the established method Cell-Dyn Sapphire.In the study, 120 blood donors participated. Blood samples were taken in the beginning and in the end of the donation. Analyses by Pronto-7TM were done before and after the donation.The haemoglobin level decreased significantly during the blood donation.

Australia is one of the largest producers and consumers of fossil fuels in the world. In a society where the effects of fossil fuels on global warming are constantly discussed, the nation?s production and consumption are subject to debate. Problems arise when negative aspects of consumption, such as emissions of greenhouse gases, are put in relation to an increased need of energy and economic growth. However, it is important to distinguish between different types of fossil fuels when it comes to their individual impact on the environment and to analyze the possibilities to increase the more environmental friendly ones.

In this thesis a possible cost effective runner change of some of the units in the hydroelectric power station Olidan is investigated. The possibility to drive a unit at the same efficiency point through a change of the turbine shaft speed and the rate of discharge is tested. Furthermore the theories behind model testing, determination of efficiency increase from model to prototype and efficiency measurements shall be discussed and analyzed with Olidan as a starting point.A predicted curve has been built on information from model tests and field measurements on the existing runners and runner data from the test of the new model. The predicted curve shows the difference in efficiency between an existing runner and a modern one. It is the difference in efficiency that is used in the calculations that are to show whether changing to a pair of new runners will be cost effective or not.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Humanity?s increasing consumption has resulted in an increasing use of resources and thus an increasing environmental impact. Hence, the environment has become an important political issue. The increasing demands from stakeholders on companies to "green" their products and work internally with environmental issues makes it more and more important for enterprises to address these issues. Small enterprises constitute the majority of all enterprises and therefore they have a significant impact on environmental problems.

The purpose of this essay is to examine the impact on children playing at a preschool yard that is designed with traditional playground equipment, and a nature-like yard without traditional playground equipment. How these respective environments influence children?s play, which other factors in the external environment that affect the game and whether the theories in the literature correspond with the results were important questions for the essay. To answer these questions a case study was applied onto two specific preschool centers, both located in Malmö. Through literature studies, inventories, observations and interviews with staff and children, a picture become clear of how the children use the yard and how their play is affected by the design of it.

This thesis aims to examine the possibility of understanding social change by using new institutionalism approaches on a specific case, The case, which describes the implementation of new public management reform in the Swedish health care system, is analysed from two separate new institutionalismperspectives; the tool perspective and the symbol perspective. These approaches differ from one another in the sense that the first relies on a rational choice ontology, while the latter rather refers to a sociological tradition. In the analysis, causal explanations as well as aim related explanations are presented. Formative moments such as economic stagnation, non-socialist governments and ideological isomorfism are presented as important factors behind the reformation. By using the tool perspective, the motives of the idea spreading and reformation of the Swedish health care system, are connected to a strictly rationalbasis such as cost efficiency and quality improvements.

This thesis aims at; describing and creating an understanding of how Friskis&Svettis internationalization process, at the start-up in England, can be seen as entrepreneurial, to describe and analyze how various cultural factors can be identified and the impact they have on the internationalization process. The empirical data were obtained through two interviews and it appears that both the organizational culture and national cultural differences can be identified and that these affected the process. The results show that the entrepreneur is both a starting point and a key driver of the process and because of this it can be considered entrepreneurial..

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This Master Thesis is a product development project that has been carried out in cooperation with Scania CV AB. The purpose has been to find the relationship between geometric parameters and the swirl number for an XPI- cylinder head in order to improve the design specification.The increased focus on environmental issues from society leads to tighter emission legislations for the truck manufactures. In order to drive the development forward considerable resources are spent on research and development on diesel engines and its combustion process. The inlet air has a significant impact on the formation of emissions and the flow that is desired is called swirl. Swirl is achieved by making the air rotate around the vertical axis of the cylinder.Earlier cylinder heads that has been developed at Scania CV AB have shown clear relationships between geometric parameters of the cylinder head and the swirl number.

This thesis is a study of the history of cultural events in Norrköping from the Agriculturemeetings in 1897until today?s sailfestival, Sail Norrköping. The purpose is to see how the events have effected Norrköping as an eventcity, but also to examine the purpose with a cultureevent. The essay also discusses modernisation?s impact on society.

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..