The report describes an ecodesign thesis performed by the author at the ÅF EcoDesign Center. The basic idea of ecodesign is to develop products with a minimized environmental load, without neglecting other significant product aspects such as function and price. During the last couple of years the public interest in environmental friendly products has increased, which has made it possible for companies to make a profit from their investments in ecodesign. To meet the increasing market for ecodesign services ÅF started the ÅF EcoDesign Center, where the company has gathered all of their competence in ecodesign in order to help companies to become greener. The task was to develop a tool for an Eco Screening.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

My essay is fundamentally about an idea. It could even be placed in the study of the history of ideas by the fact that it could be seen as if I am trying to reflect upon how one single idea can get a strong societal and historical impact. How thoughts, visions and then inventions are constructing societies and everything that derives from them. In my text I try to illuminate and connect social theory to our social reality and by using discourse (theory) analysis I try to study central terms in the discourse of surveillance. The question which is of social psychological interest would be that of how the individual in dialectical relation to thesurrounding society is free and how he then would get inflected by this surveillance.

Manne Bouveng, CEO of Optimel AB had an idea for a new kind of storage cabinet that could be adapted especially for townhouse owners. I came in contact with Manne by a familiar friend for us; we met and decided that it would suit as my thesis.What was needed to be done was a market research that would possibly show that there was a need for a new kind of storage cabinet on the market. Because of this we continued to work on the basic idea. We came up with a solution where we developed a box that resembles Optimels known mailbox Biggi Rondo, the storage cabinet is a new solution of a storage cabinet, adapted after a market that need of a lot of new space. The solution is based on a simple construction which sits an inside hang-off device which can attach tool hooks, tool holders and shelves and so on.The purpose of the assignment was to develop a new type of storage cabinet with some kind of solution to attach tools and other garden related stuff. With this we have succeeded and the concept meets the requirements we set ourselves at the beginning of the project..

I den här slutreflektionen kommer ni att kunna läsa om vårt kandidatarbete i sin helhet. Ni får ta del av det koncept vi arbetade fram och strävade efter att realisera. Ni kommer att få följa med i arbetsprocessen där vi låter er få inblick i hur vi gick från idé till färdig produkt inom de tre avdelningarna programmering, grafik och ljud. Avslutningsvis kommer vi att reflektera över kandidatarbetstiden, både som grupp och på individnivå. Några av de frågeställningar vi tar upp handlar om hur vi har lyckats genomföra projektet trots bristande planering och utan någon hierarkisk ordning samt hur det har varit att arbeta i en grupp där majoriteten av medlemmarna har haft en ny roll för första gången i ett projekt. Throughout this final reflection you'll be able to read about our graduation project as a whole.

Background: The result of our interactive information society is that sales business has shifted from a tactical to a strategical focus, thus companies have had to adapt to this change. The evolution of sales shows that companies have gone from one static model to another, which is discarded by the new concept ?insight selling? claiming that it through insights is possible to be forceful in the, these days, rough sales climate.Purpose: The purpose of the report is to form an understanding of how insight sales affect a sales process.Research question: How does insight selling affect the B2B sales process?Methodology: Process mapping through interviews in combination with organizational documents.Findings: Insight selling affects the sales process by a clearer research mindset and a change in communication in relation to the customer..

A customer of Sekonden IT is to replace the current setup authoring process for a program called PropCalc with a new process based on a setup authoring tool with high quality and usability.The report aims at present a suitable setup authoring tool for PropCalc by making use of a structured evaluation process evaluate the setup authoring tools on the market.Olof Næssén presents a process for evaluating web frameworks for Java in his thesis Utvärdering av webbramverk för Java. The evaluation process is adapted in the report to generally suit evaluation of software. After adjustment to the evaluation process an evalutaion is performed evaluating the currently available setup authoring tools.The evaluation will show that the most suitable candidate for PropCalc is InstallShield Premier but that the candidate that is finally chosen is WiX..

The present study concerns a concept development of a product idea that Bengt Magnuson, associate professor, had when a heavy storm caused a widespread power failure of long duration. With a basic power-producing unit one should be able to get through a power loss. The product could also be useful for other tasks if different modules are connected, e g grass mower or snow-blower.According to the product idea the basic unit will be able to produce electric power enough for a fridge, freezer, TV, and a few electric lamps. Normally the basic unit can be used e g as a mower, when such a module is attached. An increased number of tasks would make the contraption useful and tempting for those who do not own an electrical power set in reserve.

This thesis aims at; describing and creating an understanding of how Friskis&Svettis internationalization process, at the start-up in England, can be seen as entrepreneurial, to describe and analyze how various cultural factors can be identified and the impact they have on the internationalization process. The empirical data were obtained through two interviews and it appears that both the organizational culture and national cultural differences can be identified and that these affected the process. The results show that the entrepreneur is both a starting point and a key driver of the process and because of this it can be considered entrepreneurial..

This paper concerns the freedom of speech in our democracy and the principles underlying the restrictions. The study is aimed at using a descriptive theory to provide a useful basis for analyzing a justification of the role behind freedom of speech and its limitations. The analysis is made on the basis of the Swedish parliament debate in the form of motions and the non-governmental organization Swedish Helsinki Committee's report. The study has a focus on the law of hate speech and will be done with an idea centred analysis. On the basis of democratic theory, the central role of freedom of speech was clarified on the basis of a clear need for a reliable communication.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

In modern health care, the quality registry is anexcellent tool to monitor everyday work. Collected data forms a foundation, presented as online reports, from which local work efforts to refine care quality can be performed. All reports are coded manually by specially trained developers. This is a tedious process and hence becomes a bottleneck in the strive for improvement.This thesis evaluates whether an extended way of dealing with reports can fit into the existing work situation, with main focus on the idea of creating custom reports directly within a quality registry. It provides a set of conclusions regarding today's usage of reports as well as the users' general and specific needs within the area.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

This thesis has aimed to study steering process and institutionalization in the context of educational policy work. This has been conducted by using empirical material from the political decision-making process that preceded the implementation of a new national program on how principals should be educated and certified. By using an aggregated theoretical point of view containing new institutionalism and traditional Swedish curriculum theory, the process was analyzed from different perspectives. The results depict a process that contained several actors who tried to shape the principal education program differently. From the theoretical perspectives, the decision-making process could be understood as an act of both self-interest as well as trust in their own beliefs and cultural values.

An organization that uses all of its improvement opportunities has a great advantage compared to its competitors. It is an important task when it comes to continuous improvements of every process. Up until September 2007, Husqvarna AB had a suggestion committee who evaluated every suggestion separately and the proposer received a payment if the suggestion was approved by the committee. However, this system did not work satisfying enough to fulfill Husqvarna?s needs and they are now looking for a system that can handle the ideas from the employees in a more effective way.