This is a study of Prehistoric musical instruments from Scandinavia and the different meanings they could have had in the Prehistoric society. I have described the different types of possible music instruments and the different categories that they belong to. I have also written about their different functions that could have been for example ritual artefacts, shamanic tools or useful instruments in hunting. Two case studies are also presented in the essay, the Falköpingsflute and the Balkåkradrum..

ABB is one of the world?s leading engineering companies in power and automation technologiesand their solutions improve performance while lowering environmental impacts for energycompanies and industries. ABB FACTS designs equipment and plants for series and phasecompensation.This thesis has been performed at ABB FACTS on the Mechanical Design (DM) department inVästerås, Sweden. The purpose of the thesis was to develop and design calculations andsimulation tools for ABB FACTS?s standard series capacitor platforms.

Th is thesis is about how to create communicative images. It is mainly for landscape architects. With communicative images, I mean images created with the purpose to communicate a proposal or idea in a direct way to. By only looking at the image, the viewer should get an idea of what the proposal entails. A communicative image should also create an interest in the proposal.

ABSTRACT This essay is about traffic analysis of Web servers. The purpose is to investigate if companies analyse the traffic on the Web server and if they use this information to create more than simple statistic reports. The questions that we will answer are the following: ? How common is traffic analysis on the Web server among companies? ? Is the Web administrator limited in analysing the Web traffic, if the company has the website on a Web hotel? ? Does the company uses the results they get from analysing the traffic on the Web server for updates and changes on the Web page? To answer these questions we made a questionnaire investigation by telephone interviewing the companies? webmasters. The extent of the investigation was 20 companies in Blekinge. The information we gathered from the investigation showed that it is becoming more common that companies analyse the traffic on the Web page and that they uses the information to more than statistic reports, for example updates and changes of the Web page.

The interest in small-scale electricity in Sweden has increased strongly in recent years. The interest is noticeable both among politicians to increase the share of renewables in the energy mix, and among electricity consumers to partially replace purchased electricity with self-produced. This has resulted in a significant increase of electricity production in low voltage grids in recent years, and the trend appears to continue in the coming years. The majority of the new production plants are solar cells, followed by wind turbines, and it is also in these the greatest efforts are made in this paper.Distributed generation is often seen as something positive since it will contribute to reduced transmission losses and reduced voltage drop in the networks, and that it increases the share of electricity from renewable sources. In cases where the grids are not strong enough, or in other ways not adapted to manage the installed production, power quality may be adversely affected.

?SEPARATE WORLDS?. School librarians teaching in information seeking in high school.The aim of this Master's thesis is to study how information seeking is taught in high school and how school librarians describe their experiences of teaching information seeking. Five school librarians from five different high schools (gymnasium) in Skåne participated in the study. The empirical data derives from five interviews and fourteen observations conducted over a period of three weeks.

ABSTRACT: Introduction: There are intentions from the Swedish government to provide guidelines and tools for a healthy social planning. The field is in a Swedish context relatively unstudied regarding psychosocial health and the neighbourhood. Aim: The study aimed to examine how social planning can affect the health of individuals. The focus areas were contextual and compositional factors related to individuals' psychosocial health and the contextual risk- and health factors that exist in the neighbourhood. Method: A literature-based study was conducted and 15 scholarly articles form the basis for analyse.

The project, Flexible Snowboard System, has been carried out by the project group independently and is a module developed for snowboarders, ski rentals and ski schools. The problems of today?s solutions are that they cause the user an inconvenient standing position when riding the ski lift or skating the transportation slope, also mounting, adjustments and disassembling of the bindings are time consuming and brings undesired wear to the screws and screw holes. In addition any adjustments require that the user steps out of the bindings and have tools at hand. Flexible Snowboard System is a universal module which means that it can be assembled with all of today?s snowboards and bindings.

This project is a step towards automatic firefighting. The goal is to decrease the number of personal injuries by replacing the human firefighter with robots or similar technical tools. Especially in very hostile environments due to risk of explosions or building collapse. A robot is easy to replace and can be maneuvered from a safe distance. The idea of the project comes from the company Drones Networking which aims for developing a totally autonomous firefighting system.

This paper is a thorough review of my internship, during which I designed infographics at Grafiskt Center, SVT, Stockholm. The purpose has been to find out what guidelines and policies SVT has regarding infographics while producing infographics in a professional environment. In addition, I present the daily routine at SVT and the tools used during the work process. Furthermore, the paper contains a reflection of my work effort during the internship as well as thoughts on how I adjusted to the guidelines in question. Finally, the essay treats some examples of infographics which I produced during my time at SVT..

The interest in small-scale electricity in Sweden has increased strongly in recent years. The interest is noticeable both among politicians to increase the share of renewables in the energy mix, and among electricity consumers to partially replace purchased electricity with self-produced. This has resulted in a significant increase of electricity production in low voltage grids in recent years, and the trend appears to continue in the coming years. The majority of the new production plants are solar cells, followed by wind turbines, and it is also in these the greatest efforts are made in this paper.Distributed generation is often seen as something positive since it will contribute to reduced transmission losses and reduced voltage drop in the networks, and that it increases the share of electricity from renewable sources. In cases where the grids are not strong enough, or in other ways not adapted to manage the installed production, power quality may be adversely affected.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Background: Many authors consider knowledge to be a significant source for competitive advantage. Replicating companies found their competitiveness on an ability to leverage its knowledge base by replicating its business model in new contexts, a process often referred to as the McDonalds approach. Several authors emphasize that an efficient method for knowledge transfer may increase the risk for imitation. Purpose: The purpose of this study is to examine in an explorative manner how strategies for replicating complex knowledge systems are employed and developed. Furthermore, our ambition is to explore the notion of replication strategy.