This study investigated the possibility of implementing three standards, Transistion Minimized Differential Signaling (TMDS) and two versions of Stub Series Terminated Logic (SSTL), for inter-chip communication in a specific manufacturing process. The two SSTL standards were implemented in one transceiver system while TMDS was implemented in a separate system. The evaluation was done with Spice simulations on schematic level with some parasitic capacitance and resistance. The idea was to investigate the possibility of implementing these standards and get an idea of eventual shortcomings. In order to create models as a basis for evaluation, simulation environments with models for circuit board and packages were created and transmitters and receivers were designed.

33 referendum has taken place in european states regarding the European Union since the fall of the Berlin wall. This thesis aims to initialy identify potential patterns in this group of referenda to launch and test a theory/hypothesis anchored in this pattern.The european states are differing in nature and the standard of living is chosen as the factor that can potentially have affected the outcome of the referenda held. The carrying thought here being that the voters in states with considerably lower standard of living than the european average would have a more positive attitude towards a deepened cooperation among european states.To try this connection between standard of living and how european citizens have placed their votes a main and principal quantitative test is undertaken. It is followed by discussion and arguments about the result of the test.The argumentation goes from being hopefull of the strenght of the hypothesis, to a more ciritical view of its' strength. The thesis is wrapped up in some argumentation about how and why it fails to explain what it was initially intended to do.

Change is inevitable when software is built and deployed. It?s not particularly problematic to manage change if there is just one system. But in a large global IT organization, with several systems and people who develop, problems may arise. If organizations don?t control change, change will control the organization.

AbstractThe use of standard agreements can hardly be overestimated in the society of today. The amount of standard agreements should barely decrease. One of the standard agreement?s main purposes, to make the concluding of the contract more effective, strongly agrees with the companies will to accomplish fast concluding of agreements using as small resources as possible A dispute that can arise in these contexts is that dissimilar standard agreements collide. Between nations this is called Battle of Forms.

Kitron had wishes to be able to test and measure how disturbance affects their vehicle electronic units before they have been verified by SP Technical Research Institute of Sweden in Borås. This work started with the writing of a demand specification together with Kitron for a product PSQS, Power Supply Quality Simulator, which can generate some test pulses according to a standard for electronic units to Volvos vehicles. A design proposal was developed with the help the demand specification and was verified with the help of simulations. All electric schematics was designed with the guide of the design proposal. The pulses realized in the works of this thesis are those which Kitron experienced that they have a need to test in their own premises and which are possible to generate with the means available.

Bogsår är en form av trycksår och uppstår då underliggande vävnad bryts ned som ett resultat av långvarigt tryck. Problemen drabbar främst lakterande suggor som spenderar stor del av tiden liggande. Bogsåren uppträder som synliga sår på suggans bogparti och är diskutabelt såväl ur en djurvälfärdsmässig liksom ur en livsmedelshygienisk aspekt. Arbetet bygger på tre delar, en litteraturstudie, en omvärldsanalys och en beteendestudie. Enligt litteraturen är uppkomsten av bogsår multifaktoriell och beror på dels djurrelaterade faktorer (hull, ålder, sjukdom, tidigare förekomst av bogsår och ras etc.) samt på miljörelaterade riskfaktorer (årstid, fukt, golvtyp och värme etc.).

This thesis deals with the field of warehouse management, focusing on frequency control of stock. The purpose of the thesis is to reduce the warehouse staff mileage by placing an article based on its number of picks, i.e. how frequently it gets picked. In order to achieve relevant results the following four questions have been answered in the thesis: How should the articles be placed with regard to the picking frequency?Which factors, if any, needs to be addressed beyond the picking frequency when articles are placed based on frequency?Can the present picking system be improved?Is frequency placement with regard to the picking frequency profitable to implement for the company?The thesis is based on literature studies and on the data that has been collected from the company?s business system.

ABSTRACT System development has become more and more concentrated on development for the Web and this has resulted in larger target groups. It will most surely continue to be so considering that the Web will be the infrastructure of business and services in the future. A big target group involves that the owner of a system can earn a lot of money from the paying users, but that assumes that the system can meet user needs. If a system on the Web does not satisfy the user?s demands then they will use the competitor?s system instead because it is only a mouse-click away.

As emission legislations across the world continuously pushes engine development forward,engineers constantly need to come up with and implement fuel saving technologies. During thelast decade, variable cam phasing has become a popular solution to increase gas exchangeefficiency. This configuration is typically mechanically constrained by camshaft limitations, anda solution to circumvent this problem would be to use a different valve actuation principle.One example of this is to use pressurized air controlled by electrical solenoids. Such a systemhas been developed byCargine Engineering and this provides the starting point for this work. Tobe able to operate the valvetrain on an actual engine, a control system is needed.

In order to counteract and to discover unethical actions within an organisation, a growing number of Swedish companies implement a so-called whistleblowing system. The purpose of our essay is to study the mindset of companies and further analyse how this mindset affects the design and quality of companies' whistleblowing systems. To do this, we have used a qualitative approach by interviewing different Swedish companies about their mindsets and systems. The study determines that there seemingly are three different categories of systems of varying quality. In this study we have chosen to call them "internal system", "external system" and "combined system".

To implement an ERP-system is not an easy process. The success of the implementation depend on many different variables. The most important one is perhaps the requirement process, to define what the organization wants and expects from the system. In this study, the advantages of a process mapping are examined, in relation to the phase where the requirements are expressed in an ERP-implementation. The conclusion is that a process mapping generates an increased communication with the supplier of the ERP-system, hence the business knows their processes and thereby what they want from the system.

Article 4.1(h) in the Rome I regulation establishes which law that will be applicable on contracts concerning financial instruments concluded in multilateral systems. The main problem is that most contracts concluded within these systems have standard clauses which contain a clause on the applicable law. If this is the case, Article 3.1 in the Rome I Regulation is applicable instead. This problem makes it difficult to find a need for article 4.1(h) if it will only be applicable in exceptional cases. However, the legal position on this matter is still unclear since the Rome I Regulation has just been put into force.

The kitchen is one of the most important rooms in our homes. It is a place for social engagements, meetings between people and activity. How the kitchen looks today is a concept sprung from the Swedish kitchen standard of 1952. Eventhou this standard no longer exists it is a model of how kitchens are designed today. The kitchens most often sold today come from one of four major kitchen manufacturers in Sweden.My thesis investiges an alternative kitchen concept.

Calculated and measured energy in residential buildings is going to differ. The reason to this may be due to many factors. In this study there is a study on how these factors affect the energy use in a building. To get an insight in what defines energy, there is first a description of energy supply both worldwide and used in Sweden, followed by a description of the energy balance. In this study energy will be studied in residential buildings only.

 A villas price depends on several important factors. By statistical data, a mathematical multiple regression model was modeled. The model has important explanatory variables such as living space, renovation year and standard points has been taken into consideration, in order to assess their impact on the final price for private homes.By using a statistical program,Minitab 16, the final model was selected with eight explanatory variables. The regression for this model explains up to 67.3 % of the variation on the final price.The results showed percentage wise that the standard points had the greatest impact on the price, there after renovation year and then living space..