The accident frequency in the construction industry has shown a downward trend every year but this trend was broken 2010th. It is often lack of precautionary measures within work environment and safety that is the cause of accidents. The big construction companies understand the importance of precautionary measures within work environment and safety, as they spend a lot of money and time on that matter. By examining the work environment and the safety of the small construction companies you can see how they work. The report will presents how these small companies work with work environment and safety, and also how they follow the safety instructions that are available and how they make use of safety equipment.

The aim of this essay was to deepen the knowledge of how child-protection-work is illustrated by massmedia. The essay takes it stand in discourse analysis to explain what image is displayed of social work concerning child-protection that is published in news media during 2007 in one of Sweden?s most read evening-papers. The result of the study is that social workers involved in child-protection-work often are categorized as either too zealous or too uncommitted, in the media. The result reflected the current discourse concerning how social workers do their duties in the modern society..

Small hydropower plants have been an important source for electricity for many years. During the 70?s the general thought was that nuclear was the future. Around 2000 small waterpower plants were shut down. It wasn?t profitable to invest in.

This bachelor thesis covers fire protection methods of structural steel and the aim is to develop an information tool designed for inexperienced structural engineers. The information tool covers basic fire protection methods and the general way to produce a fire resistance for structural steel. The layout of this information tool is a simple folder that contains information about the most important steps when producing fire protection for a steel structure.The thesis starts with a general overview of the fire protection needed in buildings to fulfill national legislative and regulatory requirements. To get an understanding of how steel components behave during the influence of fire, a brief overview is presented of the material properties of steel. This chapter also contains a review of previous research in the area.

Long time-series of pressure measurements often have high quality because the early instrumentsare more or less the same as the modern ones. A time-series from Lund consisting of three dailymeasurements from 1780-1997 has been homogenised and is therefore suitable for analysingpossible influences of the enhanced greenhouse effect. According to a two-layer model of theatmosphere one finds a shift in the frequency of baroclinic instability due to an increasedtemperature gradient caused by the increasing CO2. Baroclinic instability over the Atlantic Oceanis the main cause for frontal zone production, causing cyclonic activity over the southern part ofScandinavia. Changes to the baroclinic instability would therefore be traceable in the time seriesfrom Lund.

The purpose of this study was to depict some elderly people?s experiences of personal safety alarms. Furthermore, the aim was to look into whether there is any difference in experience between men and women and depending on their level of care. Using a qualitative method, semi-structured interviews were carried out with eight elderly people; six women and two men. The main questions of the study were: How do the elderly people experience the practical use of personal safety alarms? In what ways, if any, do the elderly people experience that the personal safety alarm has changed their daily life? In what ways do the elderly people experience that the personal safety alarm effects their ability to stay in their own home? A cognitive perspective was mainly used to analyze the results.

Collections, compilations and databases currently stand under a solid intellectual property protection in Sweden. This legal protection is partly a product of the old Nordic ?catalogue-rule? seen in the former 49 § of the Swedish copyright act (upphovsrättslagen) but was further extended by the implementation of the EU directive on the legal protection of databases 96/9/EG and the new sui generis-right. Since major values are represented digitally combined with the fact that Internet serves as the main provider for information a strong legal protection for databases must be carefully crafted. When crafting this kind of legal protection the right to freedom of information is balanced against the database producers? interests of property protection as well as social and public interests such as increased innovation.

How does the weather protection systems look like today, and how will they be developed in the future? These are questions that we have worked with during this project. At the start of our report there?s a summary of the leading weather protection manufacturers in Sweden. We have explained how these systems are constructed and how they work.

The division of Electricity at Uppsala University is developing a wave energy converter(WEC) consisting of a linear generator connected to a bouy at the water surfacethrough a wire cable called the connection line.During extreme conditions, the wave power plant will experience forces up to 500kN, which lead to unnecessary wear and will ultimately cause the failure of theconverter. To prevent this there is a need for a damper.The wave energy converter works at a maximum efficiency when the translator?sare centered with respect to the stator. Due to tidal movements the position of thetranslator can deviate. There for a mechanical divice that will compensate for this isneeded.This report describes the further development of an earlier project where a tidalwave compensator for a wave energy converter of Seabased AB was developed.

The project was intended to produce a brush simulation plugin to the image processing program GIMP which would use a 6DOF drawing tablet for user input.Too ambitious goals coupled with compability issues between the resources used resulted in that no meaningful software was produced. Experience was however obtained, and this paper is intended to give an overview of relevant concepts for- and the process ofcreating a brush simulation..

Introduktion: Erosionsskador är ett växande problem bland barn, ungdomar och unga vuxna. Dental erosion har en multifaktoriell etiologi som består av endogena och exogena orsaker. Att erosionsskador på tänderna ökar kan bero på den höga konsumtionen av sura drycker bland barn, ungdomar och unga vuxna. Personer som idrottar kan löpa risk för dental erosion på grund av frekvent intag av sura sport/energidrycker men även till följd av påverkat salivflöde. Få studier har undersökt fotbollsspelares kunskap om dental erosion och dess konsumtion av sport/energidryck.Syfte: Att studera kunskapen om erosionsskador bland en grupp fotbollsspelande kvinnor och män.Frågeställningar: Vilken kunskap har fotbollsspelande kvinnor om erosionsskador? Vilken kunskap har fotbollsspelande män om erosionsskador? Vilken konsumtion har fotbollsspelarna av energi/sportdryck?Metod: Studien är en kvantitativ, empirisk, tvärsnittsstudie.Resultat: Totalt deltog 44 personer i studien, 29 kvinnor och 15 män.

SAMMANDRAGHistorisk Simulation, Delta-Normal och RiskMetrics prestation utvärderas med hjälp av Kupiecs Backtest. Value at Risk (VaR) beräknas med tre olika konfidensnivåer utifrån Affärsvärldens Generalindex och HSBC kopparindex. Utifrån överträdelser från verkligt utfall undersöks vilken VaR-modell som estimerar marknadsrisken bäst. VaR-modellernas prestation jämförs, och i analysen utreds hur konfidensnivå och tillgångars egenskaper påverkar VaR-modellernas prestation. Resultaten visar att Historisk Simulation presterar bättre än Delta-Normal och RiskMetrics på den högsta konfidensnivån vilket troligtvis beror på att RiskMetrics och Delta-Normal antar normalfördelning.

In Sweden there are 1894 small-scale hydropower plants in operation, which together generate 4.3 TWh of electricity per year according to Swedish hydropower compound (SVKF, 2011). This corresponds to the annual consumption of about 860,000 Swedish households (based on an annual consumption of 5000 kWh). In the mid-1950s there were around 4000 small-scale hydropower plants in operation in Sweden before cheap fossil fuels and uranium competed with them, in the current situation only 1,894 of these are in use. If slumbering small hydropower plants once again would be taken into use and some new ones are built, we would be able to extract about 7 TWh of renewable electricity from these annually in Sweden, representing about 1.4 million households.The thesis intends to calculate and construct a hydroelectric power plant at the existing dam in Olofsfors and give suggestions on how the power station should run during the time that fish migration is greatest in Leduån.The turbine and generator to the station in Leduån at Olofsfors is designed by the height of the fall and the water flow through the dam. The turbine selected for the station is a CK-1000RM turbine with a 4-pole 250 kW generator from Cargo & power turbine Sweden AB, which is expected to deliver 1.2 GWh per year.

In a comparing survey this thesis investigatesclassification systems for dams in Sweden, Norway,Finland, Switzerland, Canada and USA. Theinvestigation is aiming at an understanding of howpotential consequences of a dam failure are takeninto account when classifying dams. Furthermore,the significance of the classification, regarding therequirements on the dam owner and surveillanceauthorities concerning dam safety is considered andreviewed. The thesis is pointing out similarities anddifferences in the line of dam safety.The survey of dam safety is firstly based upon legalrequirements in the different countries andsecondly on guidelines regarding dam safety. Damowners generally are ultimately responsible for thesafety of their dam, and often have their ownroutines regarding how this safety is to be achieved.In this thesis, however, the legal requirements aremainly focused upon.The investigation has resulted in an outlining ofeight areas, where the classification systems in thevarious countries have been compared.

ABB is one of the world?s leading engineering companies in power and automation technologiesand their solutions improve performance while lowering environmental impacts for energycompanies and industries. ABB FACTS designs equipment and plants for series and phasecompensation.This thesis has been performed at ABB FACTS on the Mechanical Design (DM) department inVästerås, Sweden. The purpose of the thesis was to develop and design calculations andsimulation tools for ABB FACTS?s standard series capacitor platforms.