This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

SAMMANFATTNINGEnergianvändning under produktion av nya byggnader är en aspekt på den angelägna miljöfrågan, men än saknas både regleringar och undersökningar. I denna studie görs en jämförelse av energianvändning och utsläpp vid byggnation och transport av byggmaterial för två nybyggda hus ägda av Gavlegårdarna AB på Sjåaregatan 19 och Maskinistgatan 19: Gävle. Strand Etapp 2 kallas projektet på Sjåaregatan 19 och Maskinisten kallas projektet på Maskinistgatan 19 i denna undersökning. Målet för studien har varit att fastställa vilket av dessa två projekt som har haft lägst energianvändning samt utsläpp av växthusgaser vid resningstillfället, dvs. under projektens produktionsskeden.

The purpose of this thesis is to investigate the degree of influence of holes in the web of steel beams with long spanson weakening of their bearing capacity. Making holes in the web of the beam generally reduces the bearing capacity of the beam. However, it might be necessary seen from both an architectural perspective as well as from a building services perspective by creating an opportunity for building installations.The objective of this thesis is to examine how much an I-beam can be weakened without sacrificing safety and functionality. The investigation has been done by using Finite Element Method through commercial software.The regulation for structural design of building structures in Sweden used to be specified in the document known as BKR. But this was replaced by the European norm Eurocode back in May 2011.

Holmen Skog AB is an important supplier of conifer pulpwood to the Iggesund Paperboard mill. After logging and transport to the landing by a forwarder, the wood is loaded on trucks for further transport, often by using separate loaders. During this handling process considerable amounts of stone material is sometimes mixed into the pulpwood and this causes problems for the industry. The aim of this study is to identify which part of the chain from forest to pulpmill, that contributes the most to this contamination. Sizes and total volumes of the contaminating stones were also investigated.

Modeling and simulation is growing ever more important in the development of new products. This thesis describes the use of Hopsan for hydraulic modeling and its use in conjunction with Simulink with the intent of using the model in a hardware-in-the-loop setup. A sensor layer has been created in Simulink to emulate all the internal sensors in a modern forklift. The details of using legacy C-code instead of a hardware MCU for a fully simulated environment, software-in-the-loop has been outlined. There are two major routes one can follow implementing software-in-the-loop, exporting the C-functions to CAPL via a export layer or creating an s-function in Simulink.

Behovet inom FM att transportera militära förband i fredstid inför en övning eller vid mobilisering, har alltid varit stort inom Sverige. I och med att FM ominriktades så uppstod bl.a. förändringar av förbandstyper. Detta i kombination med den tekniska utvecklingen på civil och militär sida, kommer troligen att medföra både problem och möjligheter vid transport av militära förband i framtiden. Uppsatsens syfte är att analysera vilka möjligheter FM kan komma att ställas inför, avseende utnyttjande av civil och militär transportutrustning i framtiden.

The three post-communist states - Belarus, Moldova, and Ukraine ? have gone different ways in terms of freedom and democracy since the breakdown of the Soviet Union 1991. During these years, the state and the civil society have been fundamental actors in the struggle against, and even for, authoritarianism.A strong state with great capacity in Belarus has undermined the chances for the civil society to fulfil its task as a watchdog of the state and link between the citizens and the government.Failed authoritarianism in Moldova has led to a situation where both the state and the civil society are weak. The major problem is lack of organization and cohesion; both the state and the civil society have often been divided by ethnical differences and are therefore not strong enough to promote democracy.In Ukraine, the dominance of a strong state ended in 2004 when the Orange Revolution took place, sometimes called a ?peak of democracy? where popular mobilization and protests succeeded in it's opposition against the state.

I detta examensarbete undersöks vad som lockar med bilen som vardagligt transportmedel hos invånare i Malmö. Som en del i detta, identifieras faktorer bakom valet av transportmedel. Malmöbors tankar kring sin egen miljöpåverkan samt vilka utmaningar vi står inför när det gäller att gå emot ett mindre bil-dominerat samhälle diskuteras. Metoden bestod i att genomföra samtalsintervjuer med sex personer som samtliga bor i Malmö och som har körkort och tillgång till bil. Resultaten tyder på att bilens attraktion består i de fördelar den tillhandahåller, såsom lastutrymme, sparad tid, frihetskänsla och oberoende.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

We travel more nowadays. The increasing travel rate generates greenhouse gases which in the long run cause an increasing number of natural disasters over the world. Car traffic is a major contributor to this development. Out-of-town shopping centres have historically good accessibility for car traffic. This study aims to look into what are the factors that influence the choice of transport mode for dwellers in the outskirts of a town when going to out-of-town shopping centres.

Detta examensarbete är utfört åt Alnöbud och Transport i Sundsvall. Alnöbud och Transport håller påmed transport inom såväl Sundsvall som ute i landet. Deras tidrapporteringssystem var föråldrat och de använder sig idag av papper och penna för att registrera de olika anställdas tider. De ville dåveta hur man skulle kunna datorisera detta påett enkelt, smart och prisvärt sätt. Genom att gå till grunden för hur ett litet företag i dagens läge skulle kunna gå tillväga för att datorisera exempelvis ett sådant system krävdes genomgående information om allt från undersökningar, priser för liknande typer av kravspecifikationer och jämförande mellan olika produkter/tjänster.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

The purpose of this thesis is to examine the relationship between the elderly at a retirement home and their professional caretakers with focus on the perspective of the elderly. Chosen method, a qualitative interview analysis has been conducted to describe how the relationship affects the elderly in their everyday lives. The total amount of interviews were four. The relationship between the elderly and their professional caretakers has rarely been examined in previous research from an elder?s perspective.The results indicate that the elderly often are satisfied with the way the professional caretakers treat them.

Inledning Intrahospitala transporter av intensivvårdpatient är ett ansvarsfullt arbetsmoment och en stor del av intensivvårdssjuksköterskans och undersköterskans arbete. Det är riskfyllt eftersom tillbud med patient och utrustning kan ske.Syfte: Syftet var att beskriva förekomsten av tillbud och typ av tillbud under intrahospitala transporter av intensivvårdspatienter, samt jämföra om det finns skillnader i förekomst av antalet tillbud under olika tidpunkter på dygnet och skillnad mellan akut respektive planerad transport. Syftet var också att undersöka sjuksköterskors och undersköterskors upplevda grad av stress och trötthet under transporten samt om det finns skillnad i förekomst av trötthet och/eller stress vid transporter där det sker tillbud respektive inte sker tillbud.Metod: Studien är kvantitativ, deskriptiv och jämförande. Förekomst av tillbud samt upplevelse av stress/trötthet besvarades på ett svarsformulär av sjuksköterska och undersköterska under eller direkt efter intrahospital transport. Totalt ingår 42 transporter.Resultat: Tillbud förekom vid 19 transporter.

Today, companies can take advantage of mass intelligence by making use out ofcrowdsourcing. Crowdsourcing is a business model that uses the power of the collective bythe offer of a problem by means of competitions in various social media. The benefit ofcrowdsourcing is that the company gets more creative and creative solutions to the sameproblem, which would not have been possible if the company solved the problem internally.The larger mass gains an insight into the company, which in return also releases power tothe company's development. The study aims to examine the way in which citizens can beattracted to participate in the development of public transport using crowdsourcing. The studyis based on both qualitative and quantitative approach since the study has a qualitative pilotstudy.