For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

Discharge of untreated wastewater leads to unnaturally high levels of nitrogen and phosphorus in rivers, lakes and the sea, which results in unbalanced ecosystems with eutrophication and lack of oxygen. Part of the phosphorus in surface waters is coming from on-site wastewater treatment from scattered households with unsatisfactory purification. Blast furnace slag is a by-product from iron production, and has in laboratory trials showed good phosphorus binding capacity. To test blast furnace slag as a reactive filter media for phosphorus separation in a full scale experiment, a wastewater treatment plant has been built behind the picnic area at Ångersjön alongside the road E4 in central-eastern Sweden. The plant contains two parallel lines, one with blast furnaces slag and the other with Filtralite-P as phosphorus sorbent. Both filters have showed decreasing phosphorus purification effect with time in spite of a low wastewater load.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

Tidigare vid ombyggnation, försäljning och förvaltning av byggnader som var uppförda innan 80-talet utgick fastighetsägarna från enkla handritade pappersritningar. Det är en svår utmaning att hålla ritningen uppdaterad till verkliga förhållanden d.v.s. relationsritning. För ca 25 år sedan (i början på 80-talet) byttes papper och penna ut mot avancerade ritprogram (CAD) för framtagning av ritningar. Idag används CAD i stort sett för all nyprojektering och de senaste åren har utvecklingen gått mot en större användning av 3D-underlag än tidigare 2D-ritningar.

Building Information Modeling eller byggnadsinformationsmodellering används idag inom byggbranschen för att effektivisera projekteringsprocessen. Denna metod är fortfarande relativt ny inom branschen men är på väg att bli en branschstandard. Indikationer som visar på detta är att på universitetsutbildningarna Byggnadsingenjör och Affärsutveckling och entreprenörskap inom byggsektorn vid Chalmers tekniska högskola läggs stor vikt på utbildning om BIM. Många branschtidningar behandlar även detta ämne. På teknikkonsultföretaget COWI Management AB finns intresset av att se vilka möjligheter BIM-metoden kan medföra och om metoden går att överföra på processindustrin.Syftet med examensarbetet är att tydliggöra innebörden av BIM-metoden.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

Picker robots are often mounted close to each other above a conveyor belt. To be able topack robots even closer, it is desirable to reduce the footprint of the robot?s base. One way toachieve this is to skew the arms of the robot which makes it possible to move them closer toeach other.This Master Thesis has been carried out at ABB Corporate Research. The purpose is toevaluate the benefits and drawbacks for the idea of making today?s Picker robot morecompact by skewing the arms.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

This bachelor?s thesis examines the tradition of half-timbered buildings in V?stra G?taland County as there is a current lack of research on this building category in this region. The lack of knowledge may lead to the loss of potential cultural heritage values if these buildings do not receive attention. Therefore, the study aims to provide a more comprehensive understanding of its role within the region. The goal is to expand and nuance the existing research on the Swedish building tradition, particularly in V?stra G?taland County and the general Swedish half-timbered tradition.

Because of the increasing trends in energy consumption and increased environmental awareness, greater focus has been placed on improvement and development of renewable energy sources. An already proven and accepted method is biogas production from anaerobic digestion at municipal wastewater treatment plants.In the waste water treatment process solid material and dissolved pollutants are separated from the water, forming a sludge. The sludge is separated from the process and stabilized during anaerobic digestion or aerobic aeration. Most often, mesophilic anaerobic digestion is used. Because of degradation by microorganisms, biogas with a high content of methane is formed during the digestion.

En systemarkitekts praktik besta?r till stor del av att tolka, beskriva och strukturera verksamhetsprocesser och -information som underlag fo?r fo?ra?ndrings- och utvecklingsarbete, oftast med sto?d av it-system. Professionen betraktas traditionellt som en teknisk ingenjo?rskonst. Men de problem jag sta?lls info?r som arkitekt handlar inte enbart om att designa tekniska system och kommunikation mellan maskiner, utan minst lika ofta om att hantera utmaningar relaterade till mellanma?nsklig kommunikation i komplexa situationer.Vad ha?nder om vi fokuserar pa? denna andra del av arkitektens praktiska kunskap? Denna magister- uppsats handlar om spra?kets och kommunikationens roll i kontexten av ett systemutvecklingsprojekt.

The aim is to develop a new decision-making model for credit-loans. The model will be specific for credit applicants of the OKQ8 bank, becauseit is based on data of earlier applicants of credit from the client (the bank). The final model is, in effect, functional enough to use informationabout a new applicant as input, and predict the outcome to either the good risk group or the bad risk group based on the applicant?s properties.The prediction may then lay the foundation for the decision to grant or deny credit loan.Because of the skewed distribution in the response variable, different sampling techniques are evaluated. These include oversampling with SMOTE, random undersampling and pure oversampling in the form of scalar weighting of the minority class.

SammanfattningExamensarbetets syfte är att ge en övergripande bild om vad BIM egentligen är och hur arbetsmetoden ska kunna påverka byggprocessen positivt. Rapporten fokuserar på anläggningsbranschen och då främst från en projektörs perspektiv. Ett projekteringsexempel visar även på hur en anläggningsmodell kan skapas med hjälp av en programvara som stödjer arbetsflöden i BIM.BIM kan utläsas Building Information Model och avser då den eller de modeller som utgör en digital objektbaserad representation av en byggnad eller en anläggning. BIM kan även utläsas Building Information Modeling och avser då ett arbetssätt, d.v.s. processen att skapa och använda en eller flera byggnadsinformationsmodeller i bygg- eller anläggningsprocessen.Det finns många fördelar med att använda BIM, inte bara i husbyggnad utan även i anläggningsbranschen.